Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FEED THROUGH CAPACITOR; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Height: 1.1 mm; Minimum Operating Temperature: -55 Cel; Packing Method: REEL; Width (mm): 1.6;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
CPlus Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
QUARKTWIN TECHNOLOGY LTD
Data Line Filters 1206J1000473MXRE03 attributes and parameters. Explore more Data Line Filters devices from Knowles Precision Devices
Additional Features:
Capacitance:
Filter Type:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Voltage:
Terminal Finish:
Width (mm):
1206J1000473MXRE03 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
As a division of Knowles Corporation, Knowles Precision Devices (KPD), focuses on production of a wide variety of highly engineered Capacitors and Microwave to Millimeter Wave components for use in critical applications in military, medical, electric vehicle, and 5G market segments. Radar, pacemakers, MRI equipment, satellites, airplanes, electric vehicles and mobile phone base stations are just a few of the places you will find our products. Our products can be found in every corner of the world, from 8000ft below the earth’s surface to orbiting 254 miles above us on the ISS. We are a Specialty Components manufacturer, which means we choose to take on the complex challenges that come with High Reliability, High Temperature, High Performance and High Frequency solutions. This is built on our commitment to innovation, whether it be our ongoing creativity in manufacturing high performance multi-layer ceramic capacitors, or our unique ceramic formulations that allow us to provide the highest performance-for-footprint mmWave filters available
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tesla Elektronicke Soucastky
Mde Semiconductor
Semitron
Db Lectro
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
742792602
Wuerth Elektronik & Kg
Wurth Elektronik 742792602 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 60 ohm at frequencies ranging from 100 MHz to 600 MHz.
BNX026H01L
Murata Manufacturing
Murata Manufacturing's BNX026H01L is a 50V data line filter with AEC-Q200 screening. It features 4 terminals, rated for 15A current, and has an output impedance of 50 ohms. This surface mount filter operates b/w -55°C to 125°C, making it ideal for automotive and industrial applications.
MMZ1608S102ATA00
TDK
The TDK MMZ1608S102ATA00 is a chip bead data line filter with 2 terminals, FERRITE CHIP construction, and 0.5 ohm max DC resistance. It operates b/w -55 to 125 °C and has an output impedance of 1000 OHM. Ideal for surface mount applications in electronics for noise suppression and signal filtering.
BLM18BB600SN1D
BLM18BB600SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
SZEMI2121MTTAG
Onsemi
SZEMI2121MTTAG by Onsemi is a Data Line Filter with 8 terminals, rated for 0.1A current. It operates b/w -40°C to 85°C and has matte tin finish. With dimensions of 2.2mm x 2.0mm x 0.8mm, it's ideal for applications requiring surface mount filters in electronic devices.
MI0805K601R-10
Laird Technologies
MI0805K601R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 600 OHM. Ideal for surface mount applications, it has a max DC resistance of 0.1 ohm and can handle a rated current of 1.5 A efficiently.
EMI2121MTTAG
EMI2121MTTAG by Onsemi is a Data Line Filter with 8 terminals, rated for 0.1A current. With a compact size of L2.2xB2.0xH0.8mm, it offers an output impedance of 50 ohms and capacitance of 0.8uF. Ideal for IEC-approved applications requiring surface mount filters in data lines.
7427927141
Wurth Elektronik 7427927141 is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.0XB0.5XH0.5 (mm), it is ideal for surface mount applications requiring an output impedance of 470 OHM at a rated current of 0.25 A.
ACM2012H-900-2P-T03
TDK's ACM2012H-900-2P-T03 is a data line filter with 10 Mohm min insulation resistance, 50V rated voltage, and 105°C max operating temp. Ideal for automotive applications due to AEC-Q200 screening level and compact dimensions of L2.0xB1.2xH1.2 mm.
BNX025H01L
Murata Manufacturing's BNX025H01L is a 25V DATA LINE FILTER with 50 Ohm output impedance. AEC-Q200 compliant, it operates b/w -55°C to 125°C. Ideal for automotive applications due to its high insulation resistance and 15A rated current capacity.
744212331
Wurth Elektronik 744212331 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 330uH and max DC resistance of 0.3 ohm, it operates b/w -40 to 105 °C. Ideal for surface mount applications, dimensions are L6.5xB3.6xH1.65 mm, suitable for filtering data lines with an output impedance of 2000 OHM.
ACP3225-102-2P-TL000
TDK's ACP3225-102-2P-TL000 is a 2-function data line filter with 60V rated voltage and 1.2A current. With dimensions of L3.2xB2.5xH1.9 mm, it operates b/w -25 to 85 °C, ideal for surface mount applications in various electronic devices.
BLM18BB221SN1D
Murata Manufacturing's BLM18BB221SN1D is a chip bead data line filter with 2 terminals, rated for 0.45A current and 220Ω output impedance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100MHz with a max DC resistance of 0.45Ω.
LI0402C221R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .35 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .3 A;
ACT45B-510-2P
ACT45B-510-2P by TDK is a data line filter with a rated voltage of 50V and a max operating temperature of 150°C. It has a min insulation resistance of 10 Mohm and is suitable for surface mount applications.
BNX022-01L
BNX022-01L by Murata Manufacturing is a data line filter with a rated voltage of 50V and attenuation of 35dB at max frequency. It has a compact size of L12.1XB9.1XH3.1 (mm) and is suitable for surface mount applications in various electronic devices.
TPD6F002DSVR
Texas Instruments
TPD6F002DSVR by Texas Instruments is a 6V data line filter with 12 terminals. It offers a max insertion loss of 35 dB and max DC resistance of 115 ohm. Ideal for applications requiring noise filtering in data lines, it operates b/w -40 to 85°C temperatures.
4400-099LF
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 10 A; Capacitance: 50000 uF; Rated Voltage: 50 V; Terminal Finish: Silver (Ag); Maximum Insertion Loss: 70 dB;
BLM15AG221SN1D
Murata's BLM15AG221SN1D is a 0402 chip bead filter with 220 ohm output impedance, 0.29 ohm DC resistance, and 0.45 A rated current. It operates b/w -55 to 125 °C and is ideal for data line filtering applications due to its ferrite construction and surface mounting type.
BLM31PG121SN1B
Murata's BLM31PG121SN1B is a chip bead filter with 2 terminals, rated for 3A current. With dimensions of L3.2xB1.6xH1.1mm, it operates b/w -55 to 125°C and offers an output impedance of 120Ω at frequencies ranging from 100MHz to DC. Ideal for data line filtering applications due to its ferrite construction and surface mounting type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Knowles Precision Devices
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved