Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET's T598D337M2R5ATE009 is a 330uF tantalum capacitor with 0.0825mA leakage current and 1767.5mA ripple current, suitable for AEC-Q200 applications. It has a rated DC voltage of 2.5V, ESR of 9mohm, and operates b/w -55°C to 125°C in SMT packages with J bend terminals.
Median Price
$1.472
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Newark
1+ parts
$0.333
100+ parts
1k+ parts
-
10k+ parts
Mouser Electronics
$2.440
$1.270
$1.200
DigiKey
$1.265
Verical
$0.503
Nova Conductors
Modulus Dynamics
$0.076
Corohmni
$0.176
Continental Prestige Electronics
$2.120
$1.160
$0.810
Aranea Global
Argo Parts USA
Tantalum capacitors have lower equivalent series resistance (ESR) and higher capacitance per volume compared to other types of capacitors, making them suitable for high-performance applications.
Low leakage current indicates efficient insulation and long-term reliability of the capacitor.
High ripple current rating ensures stable performance in applications with varying loads or currents.
The use of embossed plastic packaging ensures protection during transportation and storage, maintaining the quality of the capacitors.
Surface-mount technology (SMT) allows for easy and efficient assembly onto circuit boards, saving space and improving overall device design.
The high maximum operating temperature enables the capacitors to withstand harsh environmental conditions and temperature variations.
High capacitance value allows for efficient energy storage and filtering in power supply circuits.
The rated voltage indicates the maximum voltage the capacitor can safely handle, making it suitable for low voltage applications.
Fixed Capacitors T598D337M2R5ATE009 attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Ripple Current (mA):
Size Code:
Terminal Shape:
Width:
T598D337M2R5ATE009 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
Toshiba
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
Yangzhou Yangjie Electronics
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
GCM31CR71H225KA55L
Murata Manufacturing
Murata Manufacturing's GCM31CR71H225KA55L is a ceramic capacitor with 2.2uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact size of 3.2x1.6x1.6mm.
0603B104K500CT
Walsin Technology
0603B104K500CT by Walsin Technology is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for surface mount applications in various electronic devices.
ECEA1HKS4R7
Panasonic
Panasonic ECEA1HKS4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -40 to 85°C.
M39006/22-0360
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 160 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
VJ0402Y103KXXAC
Vishay Intertechnology's VJ0402Y103KXXAC is a ceramic capacitor with 0.01uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 150°C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.6mm, making it suitable for various electronic devices requiring stable capacitance in a small form factor.
GRM188R71E105KA12D
Murata Manufacturing's GRM188R71E105KA12D is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact rectangular package design.
1210B475K500CT
1210B475K500CT by Walsin Technology is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with high reliability and stability.
C0805C104K5RAC7215
KEMET Corporation
KEMET C0805C104K5RAC7215 is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance. Ideal for surface mount applications in electronics due to its compact size of 2x1.25x0.78mm and operating range from -55°C to 125°C.
T491D106K035AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
C0603C104K3RACTU
KEMET C0603C104K3RACTU is a ceramic capacitor with 0.1uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
293D106X9010A2TE3
Vishay Intertechnology's 293D106X9010A2TE3 is a TANTALUM CAPACITOR with 10uF capacitance, 10V URdc, and 0.06 Tan Delta. Ideal for applications requiring compact SMT capacitors with low leakage current and high ripple current handling capabilities.
06035D104KAT2A
KYOCERA AVX
06035D104KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X5R temp characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for applications requiring compact fixed capacitors in electronic circuits.
CL10B104KO8NNNC
Samsung Electro-mechanics
CL10B104KO8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for SMT applications requiring compact size and high reliability.
12103D476MAT2A
12103D476MAT2A by KYOCERA AVX is a ceramic capacitor with 47uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
CC0603KRX7R9BB102
Yageo
Yageo's CC0603KRX7R9BB102 is a ceramic capacitor with 0.001uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications in electronics requiring compact size and stable performance.
VY2103M63Y5US63V7
Vishay Bc Components
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .01 uF; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Terminal Finish: Matte Tin (Sn);
M39006/25-0052
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
12103D226MAT2A
12103D226MAT2A by KYOCERA AVX is a ceramic capacitor with a capacitance of 22 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications.
M39006/25-0220
Defense Logistics Agency
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 30 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM155R71H102KA01D
Murata Manufacturing's GRM155R71H102KA01D is a ceramic capacitor with 0.001uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.5mm, wraparound terminals, and multi-layer design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T598D107M010ATE040
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D476M025ATE060
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D336M035ATE065
T598D336M035ATE065 by KEMET is a TANTALUM CAPACITOR with 33uF capacitance, 35V URdc, and 657.5mA ripple current. Ideal for applications requiring a compact SMT package with -55 to 125 °C operating temperature range such as automotive electronics or industrial controls.
T598D227M010ATE040
T598D227M010ATE040 by KEMET is a TANTALUM CAPACITOR with capacitance of 220 uF and rated DC voltage of 10 V. It has a leakage current of 0.22 mA and ripple current of 837.5 mA, making it suitable for applications requiring high capacitance and low leakage in a compact SMT package.
T598B686M006ATE070
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D157M016ATE065
T598D157M016ATE065 by KEMET: Tantalum polymer capacitor with 150uF capacitance, 16V rated DC voltage, and 657.5mA ripple current. Ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 125 °C operating temperature range.
T598D227M010ATE025
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598B225M050ATE150
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598B157M006ATE045
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598X156M075ATE075
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 15 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D107M010ATE080
T598D337M006ATE025
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D107M016ATE050
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598B107M2R5ATE055
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D157M006ATE025
T598B476M010ATE070
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D226M035ATE065
KEMET T598D226M035ATE065 is a 22uF tantalum capacitor with 35V URdc, suitable for AEC-Q200 applications. It features low 0.077mA leakage current and high 657.5mA ripple current, making it ideal for automotive electronics requiring reliable performance in harsh environments. With SMT package style and J bend terminals, it offers compact design and easy surface mounting capabilities.
T598V227M006ATE025
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D337M2R5ATE0097280
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D337M2R5ATE012
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved