Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET T598B157M006ATE045 is a 150uF, 6.3V tantalum capacitor with low ESR of 45mohm. Ideal for AEC-Q200 applications, it has a ripple current of 432.5mA and leakage current of 0.0945mA, making it suitable for automotive electronics and power supply circuits.
Median Price
$0.692
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.409
1k+ parts
-
10k+ parts
Mouser Electronics
$1.200
$0.611
$0.491
$0.466
DigiKey
$1.290
$0.490
$0.427
Chip1Stop
$0.435
Farnell
$0.545
$0.438
$0.429
Element14
$0.977
$0.763
$0.702
Verical
Nova Conductors
Corohmni
$0.030
Modulus Dynamics
$0.077
Continental Prestige Electronics
Aranea Global
Argo Parts USA
Tantalum solid polymer dielectric material provides high reliability and long lifespan for the capacitor.
Low leakage current ensures efficient and stable performance of the capacitor.
High ripple current rating allows the capacitor to handle fluctuations in power supply effectively.
Surface Mount Technology packaging makes it easy to mount and solder the capacitor onto circuit boards.
With a high maximum operating temperature, this capacitor is suitable for a wide range of operating conditions.
Wide temperature range makes this capacitor suitable for use in both extreme hot and cold environments.
High capacitance value allows the capacitor to store and release large amounts of electrical energy.
Capable of handling a rated DC voltage of 6.3V, making it suitable for low voltage applications.
Fixed Capacitors T598B157M006ATE045 attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Ripple Current (mA):
Size Code:
Terminal Finish:
Terminal Shape:
Width:
T598B157M006ATE045 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
1N4148WS
Vishay Semiconductors
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
C0402C103K3RACTU
KEMET Corporation
KEMET C0402C103K3RACTU is a ceramic capacitor with 0.01uF capacitance, rated for 25V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a compact rectangular package measuring 1mm x 0.5mm x 0.5mm.
C3216X5R1H106K160AB
TDK
The TDK C3216X5R1H106K160AB is a ceramic capacitor with 10uF capacitance, rated for 50V. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications due to its small size (3.2x1.6x1.6mm) and wraparound terminals, commonly used in electronics requiring stable capacitance under varying temperatures.
12105C106K4T2A
KYOCERA AVX
12105C106K4T2A by KYOCERA AVX is a ceramic capacitor with 10uF capacitance, rated for 50V. It features X7R temperature characteristics and -55 to 125 °C operating range, suitable for AEC-Q200 applications. With a compact SMT package style and multi-layer design, it offers high reliability in automotive electronics.
GRM188R61C106KAALD
Murata Manufacturing
GRM188R61C106KAALD by Murata Manufacturing is a ceramic capacitor with a capacitance of 10 uF and a rated DC voltage of 16 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications.
M39006/22-0351
Vishay Intertechnology
Vishay Intertechnology's M39006/22-0351 is a TANTALUM CAPACITOR with 47uF capacitance, 50V URdc, and 0.11 Tan Delta. Ideal for MIL-PRF-39006/22 applications requiring high ripple current (311.85mA) and low leakage current (0.001mA). Suitable for temperatures ranging from -55 to 125 °C in through-hole mounting setups.
EEVFK1J221Q
Panasonic
Panasonic EEVFK1J221Q is a 220uF Aluminum Electrolytic Capacitor with 63V URdc. It features low Tan Delta of 0.08 and high Ripple Current of 600mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
CL32B225KCJSNNE
Samsung Electro-mechanics
CL32B225KCJSNNE by Samsung Electro-mechanics is a ceramic capacitor with 2.2uF capacitance and 100V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and matte tin terminal finish. Ideal for surface mount applications requiring high capacitance stability in a compact rectangular package.
0402ZD105KAT2A
0402ZD105KAT2A by KYOCERA AVX is a ceramic capacitor with 1uF capacitance, 10V URdc. X5R temperature code, -55 to 85°C operating range. SMT package for surface mount applications in electronics requiring compact design and reliable performance.
C0805C104K5RAC
Vishay Intertechnology C0805C104K5RAC is a ceramic capacitor with 0.1uF capacitance, 50V URdc, and X7R temp characteristics. Ideal for SMT applications in electronics due to its compact size and high operating temperature range of -55 to 125 °C.
ECA2WM4R7
ECA2WM4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 450V rated DC voltage. It features tan delta of 0.20, leakage current of 0.1369mA, and ripple current of 79mA, suitable for applications requiring high capacitance and voltage stability in electronic circuits.
C0603C103K5RAC
The KEMET C0603C103K5RAC is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55 to 125°C. Ideal for surface mount applications in various electronic circuits requiring stable capacitance at different temperatures.
04023C104KAT2A
04023C104KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.1uF capacitance, 25V URdc, X7R temp characteristics, and -55 to 125°C operating range. Ideal for compact electronic devices requiring stable capacitance in harsh environments.
M39006/21-0159
Vishay Intertechnology's M39006/21-0159 is a TANTALUM CAPACITOR with 220uF capacitance, 75V URdc, and 0.37 Tan Delta. It is MIL-PRF-39006/21 compliant and suitable for applications requiring high reliability in harsh environments due to its wet tantalum construction. With a temperature range of -55°C to 125°C, it is ideal for military, aerospace, and industrial electronics.
CL10A106MA8NRNC
Samsung Electro-mechanics CL10A106MA8NRNC is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it suitable for SMT applications requiring compact size and high reliability. The rectangular package with matte tin finish and wraparound terminals ensures easy surface mounting in various electronic devices.
M39006/22-0565
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
12061C104KAT2A
12061C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 100V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
T491D106K025AT
KEMET T491D106K025AT is a 10uF, 25V tantalum capacitor with low Tan Delta of 0.06 and ESR of 1000mohm. Ideal for applications requiring high ripple current (155mA) and operating temperatures from -55 to 125°C in SMT packages.
C1005X5R1A475K050BC
The TDK C1005X5R1A475K050BC is a ceramic capacitor with 4.7uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications due to its small size (1x0.5x0.5mm) and wraparound terminals for surface mounting in various electronic devices.
CC0603KRX7R7BB104
Yageo
Yageo's CC0603KRX7R7BB104 is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. Featuring X7R temperature characteristics, it has a negative tolerance of 10%. With dimensions of 1.6mm x 0.8mm x 0.8mm, this SMT capacitor is ideal for surface mount applications in various electronic circuits.
CL10C101JB8NNNC
CL10C101JB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, making it suitable for applications requiring stable performance over a wide temperature range. With its compact SMT package style and surface mounting feature, this capacitor is ideal for use in electronic devices where space is limited.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T598D107M010ATE040
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D476M025ATE060
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D336M035ATE065
T598D336M035ATE065 by KEMET is a TANTALUM CAPACITOR with 33uF capacitance, 35V URdc, and 657.5mA ripple current. Ideal for applications requiring a compact SMT package with -55 to 125 °C operating temperature range such as automotive electronics or industrial controls.
T598D227M010ATE040
T598D227M010ATE040 by KEMET is a TANTALUM CAPACITOR with capacitance of 220 uF and rated DC voltage of 10 V. It has a leakage current of 0.22 mA and ripple current of 837.5 mA, making it suitable for applications requiring high capacitance and low leakage in a compact SMT package.
T598B686M006ATE070
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D157M016ATE065
T598D157M016ATE065 by KEMET: Tantalum polymer capacitor with 150uF capacitance, 16V rated DC voltage, and 657.5mA ripple current. Ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 125 °C operating temperature range.
T598D227M010ATE025
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598B225M050ATE150
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D337M2R5ATE009
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598X156M075ATE075
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 15 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D107M010ATE080
T598D337M006ATE025
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D107M016ATE050
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598B107M2R5ATE055
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D157M006ATE025
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598B476M010ATE070
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598D226M035ATE065
KEMET T598D226M035ATE065 is a 22uF tantalum capacitor with 35V URdc, suitable for AEC-Q200 applications. It features low 0.077mA leakage current and high 657.5mA ripple current, making it ideal for automotive electronics requiring reliable performance in harsh environments. With SMT package style and J bend terminals, it offers compact design and easy surface mounting capabilities.
T598V227M006ATE025
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T598B157M006AHS070
T598B157M006AHE0707280
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved