Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
R60IR52205000K by KEMET: Film capacitor with 22uF capacitance, 250V URdc, and 160V URac. Ideal for applications requiring POLYETHYLENE TEREPHTHALATE dielectric material in THROUGH HOLE MOUNT setups. Operating range from -55°C to 105°C makes it suitable for various electronic devices.
Median Price
$10.700
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Farnell
1+ parts
$9.140
100+ parts
$5.770
1k+ parts
$4.600
10k+ parts
$4.510
DigiKey
$9.350
$6.159
$5.395
$5.249
Mouser Electronics
$6.390
$5.390
-
Element14
$13.520
$8.650
$7.800
$7.590
Newark
$14.090
$9.220
TTI Europe
Vyrian
Nova Conductors
Corohmni
$0.126
Ampacity Inc.
$6.360
Netroflash
Polyethylene terephthalate is a high-quality dielectric material known for its stability and low dielectric loss, making this capacitor reliable and efficient.
With a high rated AC voltage, this capacitor can handle a significant amount of alternating current, making it suitable for various applications.
The tin terminal finish provides good solderability and corrosion resistance, ensuring a strong and durable connection in the circuit.
With a capacitance of 22 uF, this capacitor can store and release a substantial amount of electrical energy, making it suitable for filtering and energy storage applications.
The high rated DC voltage of 250 V ensures that this capacitor can withstand a considerable amount of direct current without any risk of damage, making it reliable for various DC circuit applications.
Fixed Capacitors R60IR52205000K attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated AC Voltage (URac):
Rated DC Voltage (URdc):
Terminal Finish:
Terminal Pitch:
Terminal Shape:
Width:
R60IR52205000K Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.25.00.70
SB
PCN Design/Specification - Mult Series Marking 25/Jun/2021
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
Baneasa S A
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-071KL
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
GRM155R71E104KE14D
Murata Manufacturing
Murata Manufacturing's GRM155R71E104KE14D is a ceramic capacitor with capacitance of 0.1uF, rated at 25V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications due to its compact rectangular package design.
CL05A475MQ5NRNC
Samsung Electro-mechanics
Samsung Electro-mechanics' CL05A475MQ5NRNC is a ceramic capacitor with 4.7uF capacitance and 6.3V rated DC voltage. It features X5R temperature characteristics, -55 to 85 °C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with stable performance in various electronic devices.
0402YD104KAT2A
KYOCERA AVX
0402YD104KAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
C3216X7R1H106K160AC
TDK
TDK C3216X7R1H106K160AC is a 1206 SMT ceramic capacitor with 10uF capacitance, 50V URdc, and X7R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 125°C.
CL10C330JB8NNNC
Samsung Electro-mechanics CL10C330JB8NNNC is a ceramic capacitor with capacitance of 0.000033 uF and rated DC voltage of 50V. With temperature coefficient of 30ppm/°C, it's ideal for applications requiring high precision and stability in a compact SMT package.
0402B103K250CT
Fenghua Advanced Technology
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
CKG57NX7S2A226M500JJ
CKG57NX7S2A226M500JJ by TDK is a ceramic capacitor with 22uF capacitance, rated for 100V. With X7S temperature characteristics and -55 to 125°C operating range, it's ideal for automotive applications meeting AEC-Q200 standard. Its compact size of 5x5x6mm and J bend terminals make it suitable for surface mount installations.
M39006/25-0236
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GCM155R71E103KA37D
Murata Manufacturing's GCM155R71E103KA37D is a ceramic capacitor with 0.01uF capacitance, X7R temperature characteristics, and 25V rated DC voltage. It is used in surface mount applications for automotive electronics due to its AEC-Q200 compliance and compact 0402 size.
06035A102JAT2A
06035A102JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.001uF and rated DC voltage of 50V. With temperature coefficient of 30ppm/°C, it's ideal for applications requiring high precision and stability in a compact SMT package. Operating b/w -55 to 125 °C, it suits various electronic devices needing reliable performance.
GCM21BR71C475KA73L
Murata Manufacturing's GCM21BR71C475KA73L is a ceramic capacitor with 4.7uF capacitance, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for automotive applications meeting AEC-Q200 standard.
CL21B102KBANNNC
CL21B102KBANNNC by Samsung Electro-mechanics is a ceramic capacitor with a capacitance of 0.001 uF and rated DC voltage of 50V. With a temperature coefficient of 15%, it is ideal for applications requiring stable performance in temperatures ranging from -55 to 125 °C. This SMT capacitor features a rectangular package shape, making it suitable for surface mounting in various electronic devices.
M39006/21-0159
Vishay Intertechnology
Vishay Intertechnology's M39006/21-0159 is a TANTALUM CAPACITOR with 220uF capacitance, 75V URdc, and 0.37 Tan Delta. It is MIL-PRF-39006/21 compliant and suitable for applications requiring high reliability in harsh environments due to its wet tantalum construction. With a temperature range of -55°C to 125°C, it is ideal for military, aerospace, and industrial electronics.
C3225X7S1H106K250AE
TDK C3225X7S1H106K250AE is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It has X7S temperature characteristics, -55 to 125 °C operating range, and 22% temp coef. Ideal for SMT applications requiring compact size, it features wraparound terminals in a rectangular package.
BFC241642004
Vishay Intertechnology BFC241642004 is a film capacitor with capacitance of 0.2uF, rated DC voltage of 63V, and operating temperature range from -55 to 85°C. It is used in applications requiring fixed capacitors with polypropylene dielectric material and through hole mounting feature.
M39006/25-0220
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 30 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM155R61C104KA88D
Murata Manufacturing's GRM155R61C104KA88D is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.5mm, making it suitable for various electronic devices requiring stable capacitance in a small form factor.
TAJD106K035RNJ
TAJD106K035RNJ by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 35V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0035mA, and Ripple Current of 155mA. Ideal for applications requiring compact SMT capacitors with high reliability and low ESR in a wide temperature range from -55 to 125 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
R60IR51005040K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYETHYLENE TEREPHTHALATE;
R60IR44705040J
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYETHYLENE TEREPHTHALATE;
R60IR4470AA40K
R60IR46805040K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 6.8 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYETHYLENE TEREPHTHALATE;
R60IN4150DQ30K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1.5 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYETHYLENE TEREPHTHALATE;
R60IN4220AA30J
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYETHYLENE TEREPHTHALATE;
R60IW5220AA30K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYETHYLENE TEREPHTHALATE;
R60IF3470506AJ
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .47 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYETHYLENE TEREPHTHALATE;
R60IR5220500-K
Nissei Electric
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYESTER;
R60IR5220AA0-K
R60IR52205000J
R60IR52205000M
R60IR5220AA00K
R60IR5220JH00J
R60IR5220JH00K
R60IR5220JH00M
R60IR5220JM00J
R60IR5220JM00M
R60IR5220400-K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: POLYESTER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved