Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET A700X567M002ATE006 is a 560uF, 2V aluminum electrolytic capacitor with low ESR of 6mohm. Ideal for applications requiring high ripple current (6100mA) and low leakage current (0.067mA), such as power supplies and voltage regulators in electronics.
Median Price
$3.490
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$2.020
1k+ parts
$1.530
10k+ parts
-
Vyrian
VNN
Nova Conductors
Corohmni
$0.265
Ampacity Inc.
$2.650
Argo Parts USA
Authorized Procurement Solutions
Netroflash
Continental Prestige Electronics
This solid polymer dielectric material ensures better stability and reliability of the capacitor.
The low tan delta value indicates low dissipation of energy, leading to efficient performance.
With a low leakage current, this capacitor provides high insulation resistance and reliability.
High ripple current handling capability allows this capacitor to function effectively in demanding applications.
The packaging method ensures secure storage and easy handling of the capacitors.
Having 2 terminals simplifies the connection process and enhances ease of use.
Surface Mount Technology (SMT) package style enables easy integration onto circuit boards.
J Bend terminals facilitate efficient soldering and mounting of the capacitor.
The negative tolerance ensures that the capacitance value does not fall below the specified range.
This high maximum operating temperature range indicates good thermal stability of the capacitor.
This type of capacitor is known for its high capacitance values and reliability.
The low minimum operating temperature range indicates that this capacitor can function in various environmental conditions.
Matte tin over nickel terminal finish provides good solderability and corrosion resistance.
Polarized design ensures correct orientation during installation and operation.
Compact height allows for space-efficient installation in electronic devices.
This capacitor's narrow width enables flexible placement in tight spaces on circuit boards.
Low equivalent series resistance results in efficient energy transfer and minimal power loss.
Surface mount capability simplifies the assembly process and enhances overall circuit design.
The medium length of this capacitor provides a good balance between compactness and easy handling.
The positive tolerance ensures that the actual capacitance value does not exceed the specified range.
With a high capacitance value, this capacitor is suitable for storing and releasing large amounts of electrical energy.
The rated DC voltage indicates the maximum voltage that this capacitor can handle safely.
Fixed Capacitors A700X567M002ATE006 attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
A700X567M002ATE006 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
EU2B-YS303C
Idec
ROTARY SWITCH;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1210C107M8PACTU
KEMET C1210C107M8PACTU is a ceramic capacitor with 100uF capacitance, 10V rated DC voltage, and X5R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 85°C. Features rectangular package shape, multi-layer design, and matte tin over nickel terminal finish.
BFC237012154
Vishay Intertechnology
Vishay Intertechnology's BFC237012154 is a fixed capacitor with a capacitance of 0.15 uF and rated DC voltage of 63 V. It features a polyester dielectric material, radial package style, and through-hole mounting. This film capacitor is commonly used in automotive applications and complies with AEC-Q200 and IEC60384-2 standards.
VJ0805Y104JXAAT
Vishay Intertechnology's VJ0805Y104JXAAT is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 150°C operating range, and ±5% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
C0805C104K5RACAUTO
KEMET C0805C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and -55 to 125°C operating range. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT package style and wraparound terminals.
C1210X475K5RACTU
C1210X475K5RACTU by KEMET is a ceramic capacitor with 4.7uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
CGA6M3X7S2A475M200AB
TDK
TDK's CGA6M3X7S2A475M200AB is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. It features X7S temperature characteristics, -55 to 125 °C operating range, and AEC-Q200 standard compliance. Ideal for surface mount applications in automotive electronics due to its compact size and high reliability.
CL21B105KBFNNNG
Samsung Electro-mechanics
Samsung Electro-mechanics' CL21B105KBFNNNG is an 0805 SMT ceramic capacitor with 1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in a wide temperature range.
CC0402KRX7R8BB104
Yageo CC0402KRX7R8BB104 is a SMT ceramic capacitor with 0.1uF capacitance and 25V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for applications requiring compact design and reliable performance in various electronic circuits.
CL05A106MQ5NUNC
Samsung Electro-mechanics' CL05A106MQ5NUNC is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. Its X5R temperature characteristics make it suitable for applications requiring -55 to 85 °C operating temperatures. With a compact SMT package style, it's ideal for space-constrained designs in various electronic devices.
C0805C104K5RAC7025
KEMET Corporation's C0805C104K5RAC7025 is a ceramic capacitor with 0.1uF capacitance, 10% tolerance, and X7R temperature characteristics. Ideal for surface mount applications in electronics, it operates b/w -55 to 125°C with a rated voltage of 50V.
C1210C107M9PACTU
C1210C107M9PACTU by KEMET is a rectangular ceramic capacitor with a capacitance of 100 uF and rated DC voltage of 6.3 V. It has a temperature coefficient of 15% and can operate b/w -55 to 85 °C. This surface mount capacitor is commonly used in electronic circuits for power supply filtering and decoupling applications.
GCJ21BR71H105KA01L
Murata Manufacturing's GCJ21BR71H105KA01L is a ceramic capacitor with 1uF capacitance, rated for 50V. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
C4532X7R1E226M250KC
TDK C4532X7R1E226M250KC is a 22uF ceramic capacitor with 25V URdc. X7R temperature characteristics, -55 to 125 °C operating range, and SMT package make it ideal for surface mount applications in various electronic devices.
EEEFT1V561AP
Panasonic
Panasonic EEEFT1V561AP is a 560uF aluminum electrolytic capacitor with 35V rated DC voltage. It features tan delta of 0.12, leakage current of 0.196mA, and ripple current of 833mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -55°C to 105°C.
EEUFR0J222
Panasonic EEUFR0J222 is a 2200uF, 6.3V Aluminum Electrolytic Capacitor with 0.26 Tan Delta and 1744mA Ripple Current. Ideal for applications requiring high capacitance and low leakage current in cylindrical package design.
C0805C222J5GACTU
KEMET C0805C222J5GACTU is a ceramic capacitor with 0.0022uF capacitance and 50V URdc. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in a wide temperature range. With SMT package style, it is ideal for compact electronic devices needing reliable energy storage.
C0805C472K5RACTU
The KEMET C0805C472K5RACTU is a ceramic capacitor with 0.0047uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact fixed capacitors with reliable performance.
C1608X7R1H104M080AA
TDK C1608X7R1H104M080AA is a 0603 size ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This surface mount capacitor is commonly used in electronic circuits for filtering, decoupling, and energy storage purposes.
M39006/22-0639
Defense Logistics Agency
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 86 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GCM21BR71C475KA73L
Murata Manufacturing's GCM21BR71C475KA73L is a ceramic capacitor with 4.7uF capacitance, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for automotive applications meeting AEC-Q200 standard.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
A700X107M010ATE010
KEMET A700X107M010ATE010 is a 100uF, 10V ALUMINUM ELECTROLYTIC CAPACITOR with low Tan Delta of 0.06 and ESR of 10mohm. Ideal for SMT applications due to its compact RECTANGULAR PACKAGE design, it offers high ripple current capability of 4700mA making it suitable for power supply circuits.
A700X157M010ATE015
KEMET A700X157M010ATE015 is a 150uF, 10V Aluminum Electrolytic Capacitor with low ESR of 15mohm. Ideal for SMT applications, it operates b/w -55 to 125 °C and has a ripple current of 3900mA.
A700X157M006ATE015
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700X157M010ATE0157280
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700X107M12RATE015
KEMET A700X107M12RATE015 is a 100uF, 12.5V aluminum electrolytic capacitor with low ESR of 15mohm. Ideal for SMT applications, it has a compact size of 7.3x4.3x4mm and operates b/w -55 to 125°C. Suitable for power supplies, filtering circuits, and voltage regulation due to its high ripple current rating of 3900mA.
A700X107M010ATE0107280
KEMET A700X107M010ATE0107280 is a 100uF, 10V aluminum electrolytic capacitor with low ESR of 10mohm. Ideal for SMT applications, it has a compact size of 7.3x4.3x4mm and operates b/w -55 to 125°C. Suitable for power supplies, industrial equipment, and automotive electronics due to its high ripple current rating of 4700mA.
A700X107M010ATE015
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700X227M004ATE010
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 4 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700V226M006ATE028
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700V477M002ATE009
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 470 uF; Rated DC Voltage (URdc): 2 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700D107M006ATE018
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700D107M006ATE0187280
A700V477M002PTE009
KEMET A700V477M002PTE009 is a 470uF, 2V aluminum electrolytic capacitor with low ESR of 9mohm. Ideal for applications requiring high ripple current (5500mA) and low leakage current (0.056mA). Designed for surface mounting with J bend terminals in compact SMT package style.
A700X107M008ATE010
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700X157M010ATE0107280
A700X187M006ATE010
KEMET Corporation's A700X187M006ATE010 is a 180uF, 6.3V aluminum electrolytic capacitor with tan delta of 0.06 and ESR of 10mohm. Ideal for surface mount applications in electronics, offering low leakage current and high ripple current handling capabilities.
A700X187M006ATE015
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 180 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700X107M12RATE0157280
A700X107M12RATE0157280 by KEMET Corporation is a 100uF aluminum electrolytic capacitor with a rated DC voltage of 12.5V. It has a low tan delta of 0.06 and leakage current of 0.05mA, making it suitable for applications requiring high ripple current and low power loss.
A700X157M010ATE010
A700X127M010ATE010
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved