Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK C2012X7R1E475K125AB is an 0805 SMT ceramic capacitor with 4.7uF capacitance, 25V URdc, and X7R temperature coefficient. Ideal for surface mount applications in electronics due to its compact size and high operating temperature range of -55 to 125°C.
Median Price
$0.073
Lifecycle Status
Suppliers In-Stock
35
In-Stock Inventory
1k+
AE Petsche
1+ parts
$0.225
100+ parts
-
1k+ parts
10k+ parts
Distrelec
$0.265
$0.177
$0.154
DigiKey
$0.320
$0.122
$0.087
$0.067
Mouser Electronics
$0.119
$0.088
$0.070
Arrow
$0.054
Verical
$0.058
Future Electronics
$0.124
RS (Exports)
$0.075
Element14
$0.069
Newark
$0.081
Chip1Stop
$0.071
$0.052
$0.046
TTI Europe
Farnell
Avnet
$0.056
Master Electronics
$0.057
Bürklin Elektronik
$0.174
$0.129
$0.090
Nova Conductors
$0.137
TME
$0.270
$0.093
$0.064
Chip Stock
IBS Electronics
$0.049
NAC Semi
$0.258
Vyrian
ACDS - Activité Composants Distribution Service
Cyclops Electronics Ltd
Vectronix, Inc
Bristol Electronics
Sensible Micro Corp
Connector Distribution Corp
Right Parts Inc.
Semi Source
Inventory MP
Contempo Components LLC
Prism Electronics
LWI Electronics Inc
Cogito LLC
Semicontronic
$0.039
$0.038
Corohmni
Ampacity Inc.
$0.072
Argo Parts USA
$0.115
Netroflash
$0.130
$0.127
Continental Prestige Electronics
$0.229
$0.133
$0.113
Aztec Data Supply Inc.
$0.306
Advanced Electronics
$0.409
$0.388
CoreStaff
$0.434
$0.171
$0.153
Modulus Dynamics
$0.514
Glotronic Ltd.
Abacus Technologies
Allen Electronics Distributors
GreenTree Electronics
Robosynatics
$0.515
$0.505
Lucentia Tech
Benley Electronics
Authorized Procurement Solutions
Eastek
Kepictronics
Ceramic offers high stability and reliability, making this capacitor a durable choice.
The rectangular shape allows for efficient use of space on the circuit board.
Multi-layer design provides high capacitance in a compact size, ideal for space-constrained applications.
Tape and reel packaging enables easy automated assembly, saving time and cost.
The 0805 size code indicates a common package size, making it compatible with a wide range of applications.
With two terminals, this capacitor is easy to install and connect in a circuit.
The surface mount technology allows for a more streamlined manufacturing process.
Wraparound terminals provide a secure connection, reducing the risk of disconnection.
With a 10% negative tolerance, this capacitor ensures consistency in performance.
X7R temperature characteristics provide stable capacitance across a wide temperature range.
This capacitor can operate effectively in high-temperature environments.
Ceramic capacitors are known for their stability and reliability, making this product a trustworthy choice.
With a minimum operating temperature of -55°C, this capacitor is suitable for a variety of environments.
The low temperature coefficient ensures minimal variation in capacitance with temperature changes.
Matte tin over nickel finish provides excellent conductivity and corrosion resistance.
The low height of 1.25 mm allows for a compact design and ease of installation.
A width of 1.25 mm contributes to the overall compactness of this capacitor.
Surface mount capability makes this capacitor easy to install on a circuit board.
With a length of 2 mm, this capacitor fits well in tight spaces.
A 10% positive tolerance ensures consistent performance within specified limits.
With a capacitance of 4.7 uF, this capacitor is suitable for various filtering and decoupling applications.
The 25V rated DC voltage allows this capacitor to be used in a wide range of voltage applications.
Fixed Capacitors C2012X7R1E475K125AB attributes and parameters. Explore more Fixed Capacitors devices from TDK
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
C2012X7R1E475K125AB Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Part Number - MLCC Part Number Change 30/Nov/2012
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
CGA9P3X7S2A156M250KB
TDK
TDK CGA9P3X7S2A156M250KB is a rectangular package ceramic capacitor with 15uF capacitance and 100V rated DC voltage. It has a temperature coefficient of 22% and can operate b/w -55°C to 125°C. This capacitor is suitable for surface mount applications in automotive electronics (AEC-Q200).
M39006/25-0220
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 30 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
TMK107B7105KA-T
Taiyo Yuden
TMK107B7105KA-T by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for SMT applications due to its compact rectangular package design and wraparound terminals.
06035C102JAT2A
KYOCERA AVX
06035C102JAT2A by KYOCERA AVX is a SMT ceramic capacitor with capacitance of 0.001uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and 5% tolerance. Ideal for applications requiring compact size, high reliability, and stable performance in various electronic circuits.
GRM21BR71A106KA73L
Murata Manufacturing
Murata Manufacturing's GRM21BR71A106KA73L is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and 15% temp coef. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
M39006/25-0052
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CC0402JRNPO9BN100
Yageo's CC0402JRNPO9BN100 is a ceramic capacitor with 0.00001uF capacitance and 50V URdc. It has C0G temp characteristics, -55 to 125 °C operating range, and ±5% tolerance. Ideal for SMT applications due to its small 0402 size and multi-layer design.
CL32B106KBJNNNE
Samsung Electro-mechanics
Samsung Electro-mechanics CL32B106KBJNNNE is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for surface mount applications requiring stable performance in a compact rectangular package.
EEEFP1V331AP
Panasonic
Panasonic EEEFP1V331AP is a 330uF aluminum electrolytic capacitor with 35V rated DC voltage. It features tan delta of 0.12, leakage current of 0.1155mA, and ripple current of 773.5mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -55°C to 105°C.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
06035C104JAT2A
06035C104JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications requiring compact size and high reliability in electronic circuits.
ESH475M050AC3AA
ESH475M050AC3AA by KEMET is a 4.7uF Aluminum Electrolytic Capacitor with 50V URdc, suitable for applications requiring a max operating temperature of 105°C. It features a low tan delta of 0.12 and leakage current of 0.003mA, making it ideal for use in circuits with ripple currents up to 30mA.
M39006/250220
Cornell Dubilier Electronics
M39006/250220 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 220uF capacitance, 30V URdc, and 0.42 Tan Delta. It is ideal for applications requiring high ripple current handling capabilities and operates b/w -55 to 125 °C. This polarized capacitor conforms to MIL-C-39006/25 standards and features a tubular package with wire terminals for through-hole mounting.
GRM21BR61H106KE43L
Murata Manufacturing's GRM21BR61H106KE43L is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for SMT applications due to its compact size of 2x1.25x1.25mm.
GMJ316BB7106KLHT
Taiyo Yuden GMJ316BB7106KLHT is a ceramic capacitor with 10uF capacitance, X7R temperature characteristics, and 35V rated DC voltage. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact 3.2mm x 1.6mm x 1.6mm dimensions.
C0805C472K5RACTU
The KEMET C0805C472K5RACTU is a ceramic capacitor with 0.0047uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact fixed capacitors with reliable performance.
T491A106K010AT7280
KEMET T491A106K010AT7280 is a 10uF, 10V tantalum capacitor with low tan delta of 0.06 and high ESR of 3800 mohm. Ideal for applications requiring compact SMT capacitors with polarized terminals in a rectangular package, operating b/w -55 to 125 °C for power supply filtering and decoupling circuits.
CL05A475MO5NUNC
CL05A475MO5NUNC by Samsung Electro-mechanics is a ceramic capacitor with 4.7uF capacitance and 16V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it suitable for SMT applications requiring compact size and high reliability.
C1210C226K3RACTU
KEMET C1210C226K3RACTU is a 22uF ceramic capacitor with X7R temperature characteristics, 25V rated DC voltage, and 10% negative tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range from -55 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
C2012X5R1A476M125AC
The TDK C2012X5R1A476M125AC is a 0805 size ceramic capacitor with a capacitance of 47 uF and a rated DC voltage of 10 V. It is suitable for surface mount applications and has a temperature coefficient of 15% (ppm/°C).
C2012X5R1V226M125AC
The TDK C2012X5R1V226M125AC is a ceramic capacitor with 22uF capacitance and 35V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring reliable energy storage.
C2012X7R1V475K125AC
TDK C2012X7R1V475K125AC is a SMT ceramic capacitor with 4.7uF capacitance, rated at 35V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact design and stable performance in various electronic devices.
C2012X7R1H225K125AC
TDK C2012X7R1H225K125AC is an 0805 SMT ceramic capacitor with 2.2uF capacitance, rated at 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
C2012X5R1C226K125AC
TDK C2012X5R1C226K125AC is a 22uF ceramic capacitor with X5R temp. characteristics, 16V rated DC voltage, and 10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance within -55 to 85°C temperature range.
C2012X7R1A106K125AC
The TDK C2012X7R1A106K125AC is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and surface mounting feature.
C2012X5R1H475K125AB
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
C2012X7S2A105K125AB
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
C2012X7R2A104K125AA
TDK's C2012X7R2A104K125AA is a SMT ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 100V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for applications requiring compact surface mount capacitors in electronic circuits.
C2012X5R1E106K125AB
TDK C2012X5R1E106K125AB is a 10uF ceramic capacitor with X5R temp. coef., 10% tolerance, and 25V rated DC voltage. Ideal for SMT applications due to its rectangular package shape, wraparound terminals, and surface mounting feature. Suitable for use in electronic circuits requiring stable capacitance at temperatures ranging from -55°C to 85°C.
C2012X5R1E226M125AC
TDK C2012X5R1E226M125AC is a SMT ceramic capacitor with 22uF capacitance, 25V URdc, and X5R temp. characteristics. Ideal for surface mount applications in electronics due to its compact size and high temp. tolerance of -55 to 85°C.
C2012X5R1V106K085AC
TDK C2012X5R1V106K085AC is a ceramic capacitor with 10uF capacitance and 35V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85°C. Ideal for surface mount applications in electronics requiring stable capacitance at varying temperatures.
C2012X7R1H105K125AB
The TDK C2012X7R1H105K125AB is a ceramic capacitor with 1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
C2012X7R1H475K125AC
TDK C2012X7R1H475K125AC is a SMT ceramic capacitor with 4.7uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in varying temperatures.
C2012X7R1C475K125AB
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
C2012X5R1V106K125AC
The TDK C2012X5R1V106K125AC is a ceramic capacitor with 10uF capacitance and 35V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
C2012X7S1A226M125AC
C2012X7S1A226M125AC by TDK is a ceramic capacitor with 22uF capacitance, X7S temperature code, and 10V rated DC voltage. It is ideal for surface mount applications due to its compact rectangular package shape and wraparound terminals. With a wide operating temperature range from -55°C to 125°C, it suits various electronic devices requiring stable performance.
C2012X7R1E475K125AE
TDK C2012X7R1E475K125AE is a SMT ceramic capacitor with 4.7uF capacitance, 25V URdc, and X7R temp characteristics. Ideal for surface mount applications in electronics due to its compact size and high operating temperature range of -55 to 125°C.
C2012X5R1A226M125AB
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
C2012X7R1E475KT
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved