Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET A700V477M002ATE009 is a 470uF, 2V aluminum electrolytic capacitor with low ESR of 9mohm. Ideal for applications requiring high ripple current (5500mA) and low leakage current (0.056mA), such as power supplies and voltage regulators in electronic devices.
Median Price
$2.130
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.010
1k+ parts
$0.839
10k+ parts
$0.720
DigiKey
$2.150
$1.007
-
Newark
$2.390
$1.370
Element14
$4.060
$2.510
$1.710
$1.550
Master Electronics
$1.610
Verical
$0.700
Farnell
$0.795
$0.621
VNN
IBS Electronics
$1.587
Nova Conductors
Vyrian
Corohmni
$0.414
Aztec Data Supply Inc.
$0.440
Ampacity Inc.
$0.820
Argo Parts USA
Continental Prestige Electronics
$0.918
Bastille Electronics
The use of solid polymer aluminum as the dielectric material ensures high reliability and stability over time, making this capacitor a durable choice.
Low tan delta value indicates minimal energy loss in the capacitor, resulting in efficient operation and lesser heat generation.
Low leakage current ensures that the capacitor holds its charge effectively, maintaining consistent performance.
High ripple current rating allows the capacitor to handle fluctuations in current smoothly, making it suitable for demanding applications.
The packaging method and material provide protection and easy handling, ensuring that the capacitor reaches the end user in optimal condition.
Having 2 terminals simplifies the installation process and enables easy connection within circuits.
Surface mount technology package style allows for compact and space-saving placement on PCBs, ideal for modern electronic devices.
J bend terminal shape provides secure and reliable connections, reducing the risk of disconnection or damage during operation.
With a 20% negative tolerance, the capacitor is guaranteed to meet or exceed the specified capacitance value, ensuring consistent performance.
High maximum operating temperature allows the capacitor to function reliably in a wide range of environmental conditions.
Aluminum electrolytic capacitors are known for their high capacitance values and reliability, making them suitable for a variety of applications.
Low minimum operating temperature ensures that the capacitor can function in colder environments without compromising performance.
Matte tin terminal finish provides good solderability and conductivity, ensuring secure connections and stable performance.
Polarized design prevents reverse voltage application, protecting the capacitor from damage and ensuring proper functionality.
Low profile height enables the capacitor to be used in space-constrained applications while maintaining high capacitance.
Compact width allows for flexible placement on PCBs and efficient use of space within electronic devices.
Low ESR value indicates efficient energy transfer and minimal power loss in the capacitor, enhancing overall circuit performance.
Surface mounting feature simplifies the installation process and enables easy integration into modern circuit designs.
Optimal length provides a balanced form factor for the capacitor, ensuring compatibility with various PCB layouts and design requirements.
With a 20% positive tolerance, the capacitor is rated to exceed the specified capacitance value, offering a margin of safety for applications.
High capacitance value of 470uF allows the capacitor to store and release significant amounts of energy, suitable for various power supply and filtering applications.
Rated for a DC voltage of 2V, this capacitor is suitable for low voltage applications where stable energy storage and release is required.
Fixed Capacitors A700V477M002ATE009 attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
A700V477M002ATE009 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Temic Semiconductors
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitachi
L78L05ABZ-AP
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
Transys Electronics
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
Formosa Microsemi
CL10B104KB8NNNL
Samsung Electro-mechanics
CL10B104KB8NNNL by Samsung Electro-mechanics is a 0603 SMT ceramic capacitor with 0.1uF capacitance and 50V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for applications requiring compact size and high reliability in various electronic circuits.
C0603C105K3PACTU
KEMET Corporation
KEMET C0603C105K3PACTU is a 1uF ceramic capacitor with 10% tolerance, X5R temp coefficient, and 25V rated voltage. Ideal for SMT applications, it operates b/w -55°C to 85°C. Suitable for various electronic devices requiring compact and reliable capacitors.
ECA1HHG4R7
Panasonic
ECA1HHG4R7 by Panasonic is a 4.7uF Aluminum Electrolytic Capacitor with 50V URdc, suitable for AEC-Q200 standards. Featuring low Tan Delta of 0.12 and low Leakage Current of 0.003mA, it operates b/w -55°C to 105°C, making it ideal for automotive applications requiring high ripple current handling capabilities.
GRM188R61E225KA12D
Murata Manufacturing
Murata Manufacturing's GRM188R61E225KA12D is a ceramic capacitor with 2.2uF capacitance and 25V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C. Ideal for surface mount applications due to its compact size of 1.6mm x 0.8mm x 0.8mm.
M39006/25-0143
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C5750X6S2W225K250KA
TDK
C5750X6S2W225K250KA by TDK is a ceramic capacitor with 2.2uF capacitance and 450V rated DC voltage. It has X6S temperature characteristics, -55 to 105 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring high reliability and performance.
BFC238320224
Vishay Intertechnology BFC238320224 is a film capacitor with 0.22 uF capacitance and 630 V rated DC voltage. It has a rectangular package shape, radial terminal style, and operates b/w -55 to 105 °C. Ideal for applications requiring high voltage tolerance and reliable performance in various electronic circuits.
C0603C225K8PACTU
KEMET Corporation's C0603C225K8PACTU is a ceramic capacitor with 2.2uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
C1005X7R1E103K050BB
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
CL10A475KP8NNNC
Samsung Electro-mechanics' CL10A475KP8NNNC is a ceramic capacitor with 4.7uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for SMT applications requiring compact size and high reliability. The capacitor's tan delta of 0.1 ensures low dissipation factor for efficient performance in various electronic devices.
C1210C106K3RACTU
KEMET Corporation's C1210C106K3RACTU is a ceramic capacitor with 10uF capacitance, 25V URdc, and X7R temperature code. Ideal for SMT applications with -55 to 125 °C operating range. Features multi-layer design in a rectangular package for various electronic circuits.
C322C104K5R5TA
KEMET Corporation's C322C104K5R5TA is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact fixed capacitors in through-hole mounting configurations.
GRM188R60J476ME15D
Murata Manufacturing's GRM188R60J476ME15D is a ceramic capacitor with 47uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C. Ideal for surface mount applications in electronics due to its compact size and high reliability.
VJ0805Y104KXATW1BC
Vishay Intertechnology's VJ0805Y104KXATW1BC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
GRM155R71H104KE14D
GRM155R71H104KE14D by Murata is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact components with stable performance.
C0603C104J3RACTU
KEMET C0603C104J3RACTU is a ceramic capacitor with capacitance of 0.1uF, rated at 25V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications due to its compact size and multi-layer design.
M39006/22-0639
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 86 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
08055C105K4T2A
KYOCERA AVX
08055C105K4T2A by KYOCERA AVX is a SMT ceramic capacitor with 1uF capacitance, 50V URdc, X7R temp code, and -55 to 125 °C operating range. Ideal for automotive applications due to AEC-Q200 standard compliance and compact size for surface mount installation.
UWX1E4R7MCL2GB
Nichicon
Nichicon UWX1E4R7MCL2GB is a 4.7uF, 25V aluminum electrolytic capacitor with low tan delta of 0.14 and leakage current of 0.003mA. Ideal for SMT applications, it offers high ripple current capacity of 12mA making it suitable for various electronic devices requiring compact and efficient power storage solutions.
M39006/25-0220
Vishay Intertechnology's M39006/25-0220 is a TANTALUM CAPACITOR with 220uF capacitance, 30V URdc, and 324mA ripple current. It is MIL-PRF-39006/25 compliant, suitable for applications requiring high reliability in temperatures ranging from -55 to 125 °C. The polarized capacitor features a wet tantalum dielectric material and tubular package shape for through-hole mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
A700X107M010ATE010
KEMET A700X107M010ATE010 is a 100uF, 10V ALUMINUM ELECTROLYTIC CAPACITOR with low Tan Delta of 0.06 and ESR of 10mohm. Ideal for SMT applications due to its compact RECTANGULAR PACKAGE design, it offers high ripple current capability of 4700mA making it suitable for power supply circuits.
A700X157M010ATE015
KEMET A700X157M010ATE015 is a 150uF, 10V Aluminum Electrolytic Capacitor with low ESR of 15mohm. Ideal for SMT applications, it operates b/w -55 to 125 °C and has a ripple current of 3900mA.
A700X157M006ATE015
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700X157M010ATE0157280
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700X107M12RATE015
KEMET A700X107M12RATE015 is a 100uF, 12.5V aluminum electrolytic capacitor with low ESR of 15mohm. Ideal for SMT applications, it has a compact size of 7.3x4.3x4mm and operates b/w -55 to 125°C. Suitable for power supplies, filtering circuits, and voltage regulation due to its high ripple current rating of 3900mA.
A700X107M010ATE0107280
KEMET A700X107M010ATE0107280 is a 100uF, 10V aluminum electrolytic capacitor with low ESR of 10mohm. Ideal for SMT applications, it has a compact size of 7.3x4.3x4mm and operates b/w -55 to 125°C. Suitable for power supplies, industrial equipment, and automotive electronics due to its high ripple current rating of 4700mA.
A700X107M010ATE015
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700X227M004ATE010
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 4 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700V226M006ATE028
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700D107M006ATE018
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700D107M006ATE0187280
A700V477M002PTE009
KEMET A700V477M002PTE009 is a 470uF, 2V aluminum electrolytic capacitor with low ESR of 9mohm. Ideal for applications requiring high ripple current (5500mA) and low leakage current (0.056mA). Designed for surface mounting with J bend terminals in compact SMT package style.
A700X107M008ATE010
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700X157M010ATE0107280
A700X187M006ATE010
KEMET Corporation's A700X187M006ATE010 is a 180uF, 6.3V aluminum electrolytic capacitor with tan delta of 0.06 and ESR of 10mohm. Ideal for surface mount applications in electronics, offering low leakage current and high ripple current handling capabilities.
A700X187M006ATE015
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 180 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700X107M12RATE0157280
A700X107M12RATE0157280 by KEMET Corporation is a 100uF aluminum electrolytic capacitor with a rated DC voltage of 12.5V. It has a low tan delta of 0.06 and leakage current of 0.05mA, making it suitable for applications requiring high ripple current and low power loss.
A700X157M010ATE010
A700X127M010ATE010
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A700V477M002ATE006
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 470 uF; Rated DC Voltage (URdc): 2 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved