Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Coupling Type: THREADED; Mounting Style: RIGHT ANGLE;
Median Price
$33.670
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$22.030
1k+ parts
$20.650
10k+ parts
-
Master Electronics
$34.710
$21.490
$20.150
Verical
$29.320
Nova Conductors
$21.770
Electro Sonic
$27.040
$21.820
$19.070
IBS Electronics
$49.148
$29.446
VNN
Inventory MP
Bristol Electronics
Vyrian
Semtec, LLC
AZTECH Wire
$6.518
Bastille Electronics
$20.682
$19.375
Continental Prestige Electronics
$21.335
Ampacity Inc.
$24.500
Argo Parts USA
Perfect Parts
SSMA Connectors 142-9701-301 attributes and parameters. Explore more SSMA Connectors devices from Johnson Components
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
142-9701-301 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200168
Molex
WIRE AND CABLE;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
Surge Components
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
Nexperia
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
Digitron Semiconductors
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
Shandong Yiguang Electronic Joint Stock
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
M39012/55-3028
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; IEC Conformity: NO; Manufacturer Series: SMA;
901-9511-1
Amphenol
Amphenol 901-9511-1 SSMA Connector features 0.11 dB insertion loss, GOLD termination, and threaded coupling. Ideal for RF applications up to 12.4 GHz with 50 ohm impedance. Suitable for cable mounting with crimp solder termination and male contact gender.
1052902-1
TE Connectivity
TE Connectivity's 1052902-1 is an RF SMA connector with threaded coupling, 0.375" body length, and 50 ohm impedance. Ideal for applications requiring a female contact gender, it operates at temperatures from -65 to 125°C and supports frequencies up to 18 GHz.
R125055000
Radiall S A
The Radiall S A R125055000 SSMA Connector features low insertion loss of 0.15 dB and a VSWR of 1.26, suitable for applications up to 26.5 GHz. With threaded coupling and gold over nickel termination, this RF SMA connector is ideal for cable mounting in high-frequency systems requiring a characteristic impedance of 50 ohms.
142-1701-616
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: MICROSTRIP; Termination Contact Finish: NICKEL; Mounting Style: STRAIGHT;
M39012/79B3102
TE Connectivity's M39012/79B3102 is an SSMA connector with 50 ohm impedance, 0.03 dB insertion loss, and 1.05 VSWR. Ideal for RF applications up to 18 GHz, it features a threaded coupling type and PTFE insulator material. MIL-C-39012 compliant, it operates b/w -65°C to 165°C with gold finish on stainless steel shell for high reliability in solder termination setups.
R124154003W
R124154003W by Radiall S A is an RF SMA connector with gold termination, threaded coupling, and PTFE insulator. With 50 ohm impedance, it operates up to 18 GHz. Ideal for cable mounting applications requiring a male plug with right-angle mounting style.
901-9511-3SF
Amphenol 901-9511-3SF is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 1.51 VSWR. It is used in commercial applications at frequencies up to 12.4 GHz for reliable signal transmission in high-temp environments.
142-0761-891
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; JESD-609 Code: e4; Additional Features: VSWR: 1.41 AT 18 GHZ;
J01151A0201
Telegartner Karl Gartner
Telegartner Karl Gartner's J01151A0201 is an RF SMA connector with gold termination, 50 ohm impedance, and 12.4 GHz operating frequency. Ideal for panel mounting in applications requiring threaded coupling, such as high-frequency communication systems. IEC conformity ensures quality performance.
SMA-P-C-H-ST-CA1
Samtec
SMA-P-C-H-ST-CA1 by Samtec is an RF SMA connector with 50 ohm impedance, PTFE insulator, and gold-plated contacts. It has a dielectric voltage of 1400VAC and operates b/w -65 to 125°C. Ideal for commercial applications requiring reliable signal transmission up to 6 GHz using RG-174 cable termination.
SF2960-6025
Sv Microwave
RF SMA CONNECTOR;
32K10K-400L5
Rosenberger Hochfrequenztechnik & Kg
32K10K-400L5 by Rosenberger is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.11 dB. It features a threaded coupling type, gold termination contact finish, and PTFE insulator material. Ideal for applications requiring high durability and operating frequencies up to 12.4 GHz.
R125236000
R125236000 by Radiall S A is an RF SMA connector with a threaded coupling type and gold termination contact finish. Featuring a low insertion loss of 0.21 dB, it operates at up to 12.4 GHz frequency, making it ideal for high-frequency applications requiring a characteristic impedance of 50 ohms. The connector's hermetic option and female contact gender offer versatility in various cable mounting configurations.
82_SMA-50-0-1/111_NH
Huber+suhner Ag
82_SMA-50-0-1/111_NH by Huber+suhner Ag is a RF SMA CONNECTOR with 50 ohm impedance, 0.42 dB insertion loss, and gold-plated contacts. Ideal for applications requiring high-frequency transmission up to 18 GHz, such as in telecommunications and aerospace industries.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (30); Maximum Operating Frequency: 26.5 GHz; IEC Conformity: NO;
132204
Amphenol 132204 is an RF SMA connector with threaded coupling, gold finish, and 50 ohm impedance. Ideal for panel mounting applications, it features a female contact gender, jack body style, and polytetrafluoroethylene insulator material. Termination options include crimp solder with straight mounting style.
R125176000
The Radiall S A R125176000 SSMA Connector features 0.25 dB insertion loss, GOLD termination contact finish, and threaded coupling type. Ideal for RF applications up to 12.4 GHz, with a characteristic impedance of 50 ohm. Suitable for cable mounting with right angle plug style.
R125.055.002W
The Radiall S A R125.055.002W SSMA Connector features 5000000000 ohm Insulation Resistance, 0.03 dB Insertion Loss, and 1000VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 27 GHz, this connector has GOLD finish, POLYTETRAFLUOROETHYLENE insulator, and operates b/w -65 to 105 °C.
CONSMA003.062
Linx Technologies
Linx Technologies' CONSMA003.062 is a SSMA RF SMA connector with gold finish, threaded coupling, and 50 ohm impedance. Ideal for board and panel mounting in applications requiring reliable signal transmission, such as telecommunications and wireless networking.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
142-9701-211
Bel Fuse
Bel Fuse's 142-9701-211 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and 0.375" Body Depth. Ideal for RF applications up to 18 GHz, with POLYTETRAFLUOROETHYLENE insulator material and GOLD shell finish.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Characteristic Impedance: 50 ohm; Coupling Type: THREADED;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Coupling Type: THREADED; Manufacturer Series: SMA;
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Maximum Operating Frequency: 18 GHz; MIL Conformity: NO;
142-9701-301
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; IEC Conformity: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; JESD-609 Code: e4; Panel Mount: NO;
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Shell Material: COPPER ALLOY; Contact Style: COAX;
142-9701-201
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; IEC Conformity: NO; Mating Contact Finish: GOLD;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Coupling Type: THREADED; Termination Type: SOLDER;
Bel Fuse's 142-9701-201 SSMA Connector features a body diameter of 0.312", insulation resistance of 5G ohm, and dielectric voltage of 1400VAC. Ideal for RF applications, this connector has a durability of 500 cycles, operates b/w -65 to 165°C, and offers a characteristic impedance of 50 ohm at up to 18 GHz frequencies.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mounting Type: BOARD; Maximum Operating Frequency: 18 GHz;
142-9403-011
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Termination Type: CRIMP; MIL Conformity: NO;
142-9404-101
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1050VAC; Coupling Type: THREADED;
142-9701-801
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: NO; Filter Feature: NO;
142-9701-811
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Body or Shell Style: RECEPTACLE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Filter Feature: NO; Manufacturer Series: SMA;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Panel Mount: NO; IEC Conformity: NO;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; Termination Contact Finish: GOLD; Contact Material: NOT SPECIFIED;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Coupling Type: THREADED; Body or Shell Style: RECEPTACLE;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; IEC Conformity: NO; Termination Contact Finish: GOLD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved