Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ITT Cannon 030-2280-000 is a CRIMP RECEPTACLE CONTACT for 20-16 AWG wires. MALE gender, ideal for assembly products applications.
Median Price
$5.800
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$4.635
100+ parts
$4.086
1k+ parts
-
10k+ parts
Powell Electronics
$4.800
$4.290
Avnet
$4.860
Interstate Connecting
$4.909
$4.328
Newark
$5.120
Mouser Electronics
$6.870
$5.430
$4.620
DigiKey
$7.530
$5.437
$4.622
Farnell
$8.810
Element14
$16.950
Master Electronics
$5.010
$4.380
$4.360
Verical
$5.894
$5.577
American Connector Supply Corp
Flip Electronics
IBS Electronics
$7.431
$6.401
$5.725
Electro Sonic
$5.380
$3.610
$3.460
Van Brakel Electronic
VNN
Nova Conductors
Mil-Aero Solutions, Inc.
Kallista Electronics Ltd
Bisco
Semi Source
QIE Inc.
Continental Prestige Electronics
Argo Parts USA
Perfect Parts
Aranea Global
Receptacle terminals are designed for secure connections, making this product ideal for applications where a stable and reliable connection is important.
Crimp terminals provide a strong mechanical connection between the wire and terminal, ensuring durability and longevity of the assembly.
Contact assemblies are essential components in electrical connections, ensuring proper current flow and signal transmission.
This product can accommodate wires as small as 20 AWG, allowing for flexibility in the selection of wire sizes for various applications.
With a maximum wire size of 16 AWG, this product can handle larger wires, offering versatility in connecting different wire gauges.
Male contacts are commonly used in connector systems to provide a reliable and secure connection, making this product a suitable choice for many applications.
Assembly Products 030-2280-000 attributes and parameters. Explore more Assembly Products devices from ITT Cannon
Assembly Item Name:
Connector Accessory Type:
Contact Gender:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Terminal Type:
Usage:
Maximum Wire Size:
Minimum Wire Size:
From the invention of the rack-and-panel and D-sub connectors to the latest miniaturized products, ITT Cannon provides innovative interconnect solutions to customers around the world. From our global manufacturing locations we serve a wide range of markets, including commercial aviation, defense, energy, industrial, medical, oil & gas, transportation, and space.
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
Bytesonic Electronics
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
1-1469491-2
TE Connectivity
CONNECTOR ACCESSORY; Assembly Item Name: GUIDE PIN; Material: ZINC ALLOY; IEC Conformity: NO; Mounting Style: STRAIGHT; Wire Gauge (AWG): 0;
0460-202-2031
TE Connectivity's 0460-202-2031 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 150 °C and supports up to 20 AWG wire size. Ideal for POWER applications, it has a rated current of 7.5 A and features a STRAIGHT mounting style.
0-0281934-2
TE Connectivity 0-0281934-2 SEALING ITEM has a temp range of -40 to 130°C, fits up to 0 AWG wire, and allows for cable entry of 2.4". Ideal for sealing applications in various industries.
FI-C3-A1-15000
Japan Aviation Electronics Industry
FI-C3-A1-15000 by Japan Aviation Electronics features crimp terminal type, operating temp -40 to 80°C, and contact resistance of 40 mohm. Ideal for signal applications with wire sizes ranging from 32 to 28 AWG, rated current of 1A, and female contact gender.
1720630311
Molex
Molex 1720630311 CONTACT features CRIMP terminals, COPPER ALLOY material, and FEMALE contact gender. With a rated current of 23A and max operating temperature of 120°C, it is ideal for power applications with wire sizes ranging from 16 to 14 AWG.
1731110060
Molex 1731110060 BACKSHELL is ideal for FCT D-SUB applications. Features include 0.315" min and 0.492" max cable entry, ZINC ALLOY material, -35 to 100°C operating temp range, and SCREW mounting options (4-40 UNC).
3-2198618-7
TE Connectivity's 3-2198618-7 BACKSHELL is an assembly product with a shielding feature. It has shell sizes of 4 and can accommodate wires up to 0 AWG. Made of ABS material, it offers mounting options with screws (#4-40).
5748676-3
TE Connectivity 5748676-3 is a backshell assembly product with 3 shell sizes, shielding, and zinc alloy material. It supports plug/receptacle usage with min cable entry of 0.255" and max operating temperature of 105°C. Ideal for applications requiring secure mounting using #4-40 screws and accommodating up to 0 AWG wire size.
1-968857-1
TE Connectivity 1-968857-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 13 AWG and rated current of 22 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1-770520-1
TE Connectivity's 1-770520-1, a CRIMP terminal with stamped contact design, supports wire gauge from 24 to 22 AWG. It operates b/w -40°C to 105°C and handles up to 11A current. Ideal for applications requiring precise crimping in tight spaces with cable entries ranging from 0.055" to 0.07".
207445-3
TE Connectivity's 207445-3 is a RECEPTACLE with Shell Sizes of 17. It can operate b/w -55 to 105°C, accommodating wire sizes up to 0 AWG. Made of POLYETHYLENE, it's ideal for various Assembly Products applications.
02-08-1001
Molex 02-08-1001 is a CRIMP FEMALE CONTACT with SQ PIN-SKT style made of BRASS. It is used in Assembly Products for STRAIGHT mounting applications.
A3B-2630SCC
Hirose Electric
A3B-2630SCC by Hirose Electric is a CRIMP terminal CONTACT with FEMALE gender, suitable for STRAIGHT mounting. Made of PHOSPHOR BRONZE, it features BELLOWED contact style and 0.09" terminal length. Ideal for various assembly applications requiring reliable electrical connections.
1534809-1
TE Connectivity 1534809-1 backshell has 3 shell sizes, shielding, and 0.189" min cable entry. Ideal for applications requiring steel material, it accommodates up to 0 AWG wire size with 0.433" max cable entry. Mounting options include screw and 14702 for secure installation.
M24308/25-9F
Cinch Connectivity Solutions
CONNECTOR ACCESSORY; DIN Conformity: NO; Mounting Option-2: SCREW; MIL-Connector Accessory Name: SCREW ITEM; IEC Conformity: NO; Usage: M24308 SERIES CONNECTOR;
43030-0003
The Molex 43030-0003 contact is designed for use with terminals 43025, 43645, and 44133. It features a finish thickness of 30, crimp terminal type, and chain contact design. Ideal for applications requiring a female contact gender, straight mounting style, and square pin-socket contact style.
51164-0905
Assembly Items;
1SNK708911R0000
TERMINAL BLOCK ACCESSORY; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYAMIDE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
AT62-201-20141
Amphenol
CONNECTOR ACCESSORY;
1924463-3
TE Connectivity's 1924463-3 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 18 AWG, rated for 13A current. Ideal for power applications with operating temperatures ranging from -40 to 120°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
030-2409-003
ITT Cannon
CONNECTOR ACCESSORY; Rated Current: 5 A; Minimum Wire Size: 22 AWG; Finish Thickness: 50; Contact Gender: FEMALE; Cable Types: FLAT;
030-2409-001
ITT Cannon 030-2409-001 contact features crimp terminal, loose design, and copper alloy material. Ideal for signal applications with flat cable types, rated at 5A current for 20-22 AWG wires. Female gendered blade pin-skt contact suitable for straight mounting assembly products.
030-2410-001
CONNECTOR ACCESSORY; Additional Features: MATING: GOLD (20) OVER NICKEL, TERMINATION: GOLD FLASH; Material: COPPER ALLOY; DIN Conformity: NO; Contact Design: LOOSE; Assembly Item Name: CONTACT;
030-2410-003
ITT Cannon 030-2410-003 contact features crimp terminal, loose design, and copper alloy material. Ideal for signal applications with flat cable types, rated at 5A current for 24-26 AWG wires. Female blade pin-skt contact suitable for straight mounting assembly products.
030-2492-001
ITT Cannon 030-2492-001 contact designed for signal applications with crimp terminal type. Made of copper alloy, it supports wire sizes from 26 AWG to 24 AWG and rated current up to 5 A. Ideal for flat cable types, featuring female gender and blade pin-skt contact style.
030-2416-001
CONNECTOR ACCESSORY; Rated Current: 5 A; Cable Types: FLAT; DIN Conformity: NO; Contact Gender: FEMALE; Material: COPPER ALLOY;
030-2487-016
CONNECTOR ACCESSORY; Minimum Wire Size: 24 AWG; Terminal Type: CRIMP; Maximum Operating Temperature: 125 Cel; Mounting Style: STRAIGHT; Assembly Item Name: CONTACT;
030-2487-017
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Contact Design: STAMPED; Additional Features: MATING: GOLD OVER NICKEL; MIL Conformity: NO; IEC Conformity: NO;
030-2488-016
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Maximum Wire Size: 20 AWG; Contact Design: STAMPED; Mounting Style: STRAIGHT; Minimum Operating Temperature: -55 Cel;
030-2491-001
ITT Cannon 030-2491-001 contact features copper alloy material, crimp terminal type, and 5A rated current. Ideal for signal applications with flat cable types, accommodating wire sizes from 22 to 20 AWG. Suitable for female contacts in straight mounting style.
030-2259-000
ITT Cannon 030-2259-000 is a male contact plug for crimp terminals. Supports wire sizes from 26 AWG to 22 AWG. Ideal for assembly products, specifically designed for applications requiring reliable electrical connections.
0302216
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 0302216;
0302232
TERMINAL BLOCK ACCESSORY;
0302287
0302342
030-2487-014
CONNECTOR ACCESSORY; Contact Style: SQ PIN-SKT; Terminal Type: CRIMP; Contact Gender: FEMALE; DIN Conformity: NO; MIL Conformity: NO;
030-2488-014
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Assembly Item Name: CONTACT; Contact Style: SQ PIN-SKT; Contact Gender: FEMALE; Material: BRASS;
030-2493-001
CONNECTOR ACCESSORY; Rated Current: 5 A; IEC Conformity: NO; Mounting Style: STRAIGHT; Cable Types: FLAT; Maximum Wire Size: 18 AWG;
030-2273-000
CONNECTOR ACCESSORY; Usage: RECEPTACLE; IEC Conformity: NO; Minimum Wire Size: 22 AWG; Maximum Wire Size: 20 AWG; MIL Conformity: NO;
030-2286-000
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Maximum Wire Size: 12 AWG; Contact Gender: MALE; Usage: RECEPTACLE; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved