Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: HLSSOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G14;
Median Price
$1.700
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.798
1k+ parts
$0.554
10k+ parts
$0.475
Digiode
$1.273
-
Vyrian
$1.340
Corphita
$1.206
Modulus Dynamics
$7.550
$7.248
$6.946
Infinite Electronics LLP (Excess)
GreenTree Electronics
A-Z Elektronik GmbH
Authorized Procurement Solutions
Microchip USA
Perfect Parts
Graphics Display Drivers TLD1313EL attributes and parameters. Explore more Graphics Display Drivers devices from Infineon Technologies
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Segments:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
TLD1313EL Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Formosa Microsemi
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Sensitron Semiconductor
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
EU2B-YS3303C
Idec
ROTARY SWITCH;
LM3410XMYE/NOPB
LM3410XMYE/NOPB by Texas Instruments is a graphics display driver with 8 terminals, operating from -40 to 125 °C. It has a supply voltage range of 2.7-5.5 V and is suitable for automotive applications as an LED display driver with a small outline package style.
TPS92200D1DDCR
TPS92200D1DDCR by Texas Instruments is a graphics display driver with a max supply voltage of 30V. It has a small outline, thin profile package style and operates in industrial temperature range. This LED display driver is suitable for applications requiring high-quality graphics and precise control.
PCF8576CT/1,112
NXP Semiconductors
PCF8576CT/1,112 by NXP Semiconductors is a graphics display driver with dot matrix display mode and serial data input. It has a small outline package style, operates at temperatures ranging from -40 to 85 °C, and is commonly used in liquid crystal display driver applications.
MXHV9910BE
Littelfuse
The Littelfuse MXHV9910BE is a graphics display driver with 8 terminals, operating temperature range of -40 to 85°C, and max supply voltage of 15V. It supports serial/parallel data input modes and is ideal for LED display driver applications requiring a small outline package style.
LT3491EDC#TRMPBF
Analog Devices
Analog Devices' LT3491EDC#TRMPBF is a LED display driver with 6 terminals, operating from 2.5V to 12V. It has a small outline package style and can withstand industrial temperatures (-40°C to 85°C). Ideal for graphics displays, it offers high reliability in compact applications.
PCA9551BS,118
PCA9551BS,118 by NXP Semiconductors is a SERIAL LED DISPLAY DRIVER with 16 terminals and 2.3-5.5 V supply voltage range. It operates in industrial temperature range (-40 to 85 °C) and is suitable for graphics display driver applications due to its compact square shape and surface mount capability.
HT1621
Holtek Semiconductor
HT1621 by Holtek Semiconductor is a CMOS Graphics Display Driver with 32 segments, 4 backplanes, and 48 terminals. It operates at -25 to 70°C, requires 3/5V power supply, and draws 0.6mA max current. Ideal for applications requiring segment display mode in small outline packages.
CD4511BE
General Electric Solid State
Display Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CAT4004AHU2-GT3
Onsemi
CAT4004AHU2-GT3 by Onsemi is a LED display driver with 8 terminals, operating voltage range of 2.4V to 5.5V, and industrial temperature grade up to 85°C. It comes in a small outline package suitable for graphics applications requiring precise control over multiple segments.
TPS92511DDAR
TPS92511DDAR by Texas Instruments is an LED display driver with a supply voltage range of 4.5V to 65V, suitable for automotive applications. It features a small outline package with dual terminals and operates in temperatures from -40°C to 125°C. The driver has a moisture sensitivity level of 3 and peak reflow temperature of 260°C.
LT3476EUHF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR;
TLC59116FIPWR
TLC59116FIPWR by Texas Instruments is a graphics display driver with 16 channels, constant-current output, and serial data input mode. It operates b/w -40 to 85 °C and supports supply voltages of 3-5.5 V. Ideal for LED displays, it comes in a small outline package with dual terminals for industrial applications.
ZXLD1366ET5TA
Diodes Incorporated
ZXLD1366ET5TA by Diodes Inc. is a LED display driver with 24V nominal voltage, operating from -40 to 125 °C. It has a max supply voltage of 60V and a min fmax of 0.625 MHz. Ideal for automotive applications due to AEC-Q100 screening level.
MAX20090ATP/VY+T
Maxim Integrated
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Screening Level: AEC-Q100; Peak Reflow Temperature (C): 260;
TPS92640PWPR/NOPB
TPS92640PWPR/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 85V and power supplies of 24V. It operates in automotive applications, offering constant-current output characteristics and a wide temperature range from -40 to 125°C. With a small outline package style, it is suitable for LED display driver interface ICs.
MAX6950CEE+
MAX6950CEE+ by Analog Devices is a Graphics Display Driver with 5-DIGIT display, 8 segments, and 16 terminals. It operates on a supply voltage range of 2.7V to 5.5V and has a max operating temperature of 70°C. Ideal for LED displays, it features serial data input mode and segment display capability.
TPS92515AHVQDGQRQ1
TPS92515AHVQDGQRQ1 by Texas Instruments is a LED display driver with 10 terminals, suitable for automotive applications. It operates b/w -40 to 125 °C with a supply voltage range of 5.5-65 V. The package style is small outline, heat sink/slug, thin profile, and shrink pitch.
LP5030RJVR
LP5030RJVR by Texas Instruments is a SERIAL graphics display driver with 30 channels and segments. It operates b/w -40 to 125 °C, suitable for automotive applications. With a supply voltage range of 2.7V to 5.5V, it offers a max frequency of 0.4 MHz for LED displays.
HEF4794BT,118
HEF4794BT,118 by NXP Semiconductors is a graphics display driver with 16 terminals and a small outline package style. It operates at temperatures ranging from -40 to 85 °C and has a max seated height of 1.75 mm. This IC type LED display driver is commonly used in industrial applications requiring serial data input mode and a nominal voltage of 5 V.
TPS92661QPHPRQ1
TPS92661QPHPRQ1 by Texas Instruments is a Graphics Display Driver with 12 channels, operating voltage range of 4.5-5.5 V, and max fmax of 16 MHz. Ideal for automotive applications due to AEC-Q100 screening level and nickel palladium gold terminal finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLD1211SJFUMA1
Infineon Technologies
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Width: 4 mm;
TLD1311ELXUMA1
TLD1311ELXUMA1 by Infineon Technologies is a graphics display driver with a max supply voltage of 40V. It is a small outline, low profile package with 14 terminals and a gull wing terminal form. This LED display driver is suitable for various applications requiring high-quality graphics.
TLD1121ELXUMA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: HLSSOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
TLD1314ELXUMA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: HLSSOP; Package Shape: RECTANGULAR; Width: 3.9 mm;
TLD1313ELXUMA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: HLSSOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 18 V;
TLD11141EPXUMA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: HTSSOP; Package Shape: RECTANGULAR; Terminal Pitch: .65 mm;
TLD1120ELXUMA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: HLSSOP; Package Shape: RECTANGULAR; Maximum Seated Height: 1.7 mm;
TLD1311EL
TLD1125EL
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: HLSSOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH;
TLD1312ELXUMA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: HLSSOP; Package Shape: RECTANGULAR; Terminal Finish: TIN;
TLD1121EL
TLD1211SJ
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Technology: BIPOLAR;
TLD1124ELXUMA1
TLD1124ELXUMA1 by Infineon Technologies is a LED display driver with 14 terminals and a max supply voltage of 40V. This small outline package has a rectangular shape, gull wing terminal form, and low profile design suitable for graphics display applications. It meets AEC-Q100 screening level standards and features surface mount capability for easy integration into various electronic devices.
TLD1312EL
TLD1211SJXT
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): NOT SPECIFIED;
TLD1310EL
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: HLSSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
TLD1125ELXUMA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TLD1114-1EP
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: HTSSOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G14;
TLD1120EL
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: HLSSOP; Package Shape: RECTANGULAR; Maximum Supply Voltage: 40 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved