Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BCR421UW6-7 by Diodes Inc. is a graphics display driver with 6 terminals, operating from -55 to 150°C. Its small outline package with matte tin finish and gull wing terminal form makes it suitable for LED display driver applications. The device has a peak reflow temperature of 260°C and is surface mountable, ideal for compact designs.
Median Price
$0.102
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.087
Arrow
Element14
$0.168
$0.144
Nova Conductors
$0.141
Ozdisan Elektronik
$64.971
Chip Stock
NAC Semi
$0.172
Vyrian
Rutronik
$0.117
VNN
ComSIT Distribution GmbH
Classic Components Corporation
Ampacity Inc.
$0.074
Semicontronic
$0.072
Argo Parts USA
$0.137
Netroflash
$0.134
$0.131
Component Stockers USA
$0.390
$0.160
$0.120
$0.080
Corohmni
$4.388
Aztec Data Supply Inc.
$5.930
Advanced Electronics
$8.074
$7.670
Metaverse IC Inc.
Perfect Parts
Lixinc
Continental Prestige Electronics
$0.226
$0.142
GreenTree Electronics
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Glotronic Ltd.
Futuretech Components
Robosynatics
$10.247
$10.038
Lucentia Tech
This material provides durability and protection for the graphics display driver, ensuring a longer lifespan.
Allows for easy installation on circuit boards, saving time and effort during assembly.
Ensures stable performance even in high temperature environments, making it suitable for a variety of applications.
Accurate output polarity ensures proper functioning of the graphics display driver, leading to reliable performance.
Close terminal pitch allows for compact design and efficient use of space on the circuit board.
Graphics Display Drivers BCR421UW6-7 attributes and parameters. Explore more Graphics Display Drivers devices from Diodes Incorporated
Input Characteristics:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
BCR421UW6-7 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev A/T Site 31/Mar/2021
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
FT232RL-REEL
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
1N4148
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
TPS92518HVPWPT
TPS92518HVPWPT by Texas Instruments is a graphics display driver with 2 channels, operating at -40 to 125 °C. It features a serial data input mode, small outline package style, and supports a max supply voltage of 65 V. Ideal for automotive applications requiring LED display drivers in compact designs.
LYT0006P
Power Integrations
LED DISPLAY DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
ZXLD1360ET5TA
Zetex Plc
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR;
TLC5941PWPR
TLC5941PWPR by Texas Instruments is a graphics display driver with 16 segments, operating at 3-5.5V. It features constant-current output, serial data input mode, and a small outline package style. Ideal for LED displays in industrial applications due to its wide temperature range (-40 to 85°C) and low supply current (60mA).
ICM7224IPL
Harris Semiconductor
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Shape: RECTANGULAR; Technology: CMOS;
ICM7228AIBIZ
Intersil
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
LP5569ARTWR
LP5569ARTWR by Texas Instruments is a graphics display driver with 9 channels and 9 segments. It operates at a min supply voltage of 2.5V and max supply voltage of 5.5V, making it suitable for industrial applications requiring LED display drivers.
CAV4109V-GT2
CAV4109V-GT2 by Onsemi is a graphics display driver with 16 terminals and a small outline package style. It operates at a supply voltage range of 3-5.5 V and has an industrial temperature grade. This LED display driver is suitable for applications requiring parallel data input mode and can handle up to 10 mA of max supply current.
TPS92515QDGQTQ1
TPS92515QDGQTQ1 by Texas Instruments is a LED display driver with 10 terminals, operating voltage range of 5.5V to 42V, and temp grade for automotive applications. It features small outline package style, dual terminal position, and AEC-Q100 screening level. Ideal for graphics displays in automotive environments due to its high temp tolerance and robust design.
TLC5940PWPRG4
TLC5940PWPRG4 by Texas Instruments is a graphics display driver with 16 channels, dot matrix display mode, and serial data input. It operates b/w -40 to 85 °C and has a max supply voltage of 5.5 V. Ideal for LED displays in industrial applications due to its small outline package style and open-drain output characteristics.
LM3409QHVMY/NOPB
National Semiconductor
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
PCA9632DP2,118
NXP Semiconductors
NXP Semiconductors' PCA9632DP2,118 is a graphics display driver with 10 terminals and serial data input mode. It operates b/w -40 to 85°C, with a supply voltage range of 2.3-5.5V. Ideal for LED displays, it has a small outline package style and Gull Wing terminal form.
TPS61165DRVR
TPS61165DRVR by Texas Instruments is a graphics display driver with 6 terminals, operating voltage range of 3-18V, and max temp of 85°C. Ideal for LED display applications due to its open-drain output, small outline package style, and industrial temperature grade suitability.
LP5009RUKR
LP5009RUKR by Texas Instruments is a graphics display driver with 9 channels and segments. It operates b/w -40 to 85°C, with a supply voltage range of 2.7V to 5.5V. Ideal for LED displays, it features a serial data input mode and comes in a square chip carrier package style.
LM3406MHX/NOPB
LM3406MHX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and constant-current output. It is designed for automotive applications, featuring AEC-Q100 screening and operating temperatures ranging from -40 to 125°C. This LED display driver comes in a small outline package with 14 terminals, making it suitable for compact designs.
STP16CPC26TTR
STP16CPC26TTR by STMicroelectronics is a Graphics Display Driver with 16 segments, operating voltage range of 3-5.5V, and max frequency of 30MHz. Ideal for automotive applications due to its small outline package and serial data input mode for LED display driving.
TLC5941RHBT
TLC5941RHBT by Texas Instruments is a graphics display driver with 16 segments, operating at 3-5.5V. It features serial data input mode, constant-current output, and quad terminal position. Ideal for LED displays in industrial settings due to its wide temperature range (-40 to 85°C) and compact chip carrier package style (5x5mm).
LP5024RSMR
LP5024RSMR by Texas Instruments is a graphics display driver with 24 channels and segments. It operates b/w -40 to 85 °C, with supply voltage ranging from 2.7V to 5.5V. Ideal for LED displays, it features a serial data input mode and terminal finish of Ni/Pd/Au/Ag.
BCR401UW6Q-7
Diodes Incorporated's BCR401UW6Q-7 is a graphics display driver with a max supply voltage of 40V. This LED display driver has 2 segments and operates at a nominal voltage of 10V. With AEC-Q101 screening level, it is ideal for automotive applications due to its small outline package style and dual terminal position.
MAX7219ENG+
Analog Devices
MAX7219ENG+ by Analog Devices is a Graphics Display Driver with 8-digit display capability. It operates on a supply voltage range of 4-5.5V and has a max operating temperature of 85°C. Ideal for industrial applications requiring LED display drivers with serial data input mode and segment display capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BCR420UE6327HTSA1
BCR420UE6327HTSA1 by Infineon Technologies is a LED display driver with 6 terminals in a small outline package. It features gull wing terminal form, AEC-Q101 screening level, and tin finish. Ideal for applications requiring compact design and high reliability in automotive electronics.
BCR402UE6327HTSA1
BCR402UE6327HTSA1 by Infineon Technologies is a LED display driver with 6 terminals in a small outline package. It operates at 10V nominal voltage, with terminal pitch of 0.95mm and gull wing terminal form. Ideal for graphics display applications due to its compact size and surface mount capability.
BCR420UFD-7
BCR420UFD-7 by Diodes Inc. is a LED display driver with 6 terminals, small outline package style, and nickel palladium gold finish. It has a peak reflow temp of 260°C and dual terminal position. Ideal for graphics display applications requiring a compact design and surface mount capability.
BCR401UE6327HTSA1
BCR401UE6327HTSA1 by Infineon Technologies is a small outline LED display driver with 6 terminals. It operates at a nominal voltage of 10V and has a terminal pitch of 0.95mm. This graphics display driver is ideal for applications requiring compact design and surface mount technology.
BCR420UE6433HTMA1
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 1;
BCR421UE6327HTSA1
BCR421UE6327HTSA1 by Infineon Technologies is a LED display driver with 6 terminals, 3.3V supply voltage, and small outline package style. It is designed for graphics display applications requiring surface mount technology and features a gull wing terminal form. The rectangular package shape with a max seated height of 1.1mm makes it suitable for compact electronic devices.
BCR402WH6327XTSA1
BCR402WH6327XTSA1 by Infineon Technologies is a LED display driver with 4 terminals, small outline package style, and 10V nominal voltage. It is used in graphics display drivers for applications requiring surface mount technology and thin profile packages.
BCR421UW6Q-7
BCR421UW6Q-7 by Diodes Inc. is a LED display driver with 2 segments, operating at 3.3V nominal voltage. It features small outline package style, matte tin terminal finish, and AEC-Q101 screening level for automotive applications. The rectangular plastic/epoxy body measures 3x1.6x1.4mm with dual terminals in gull wing form, suitable for surface mount assembly at peak reflow temp of 260°C.
BCR420UW6-7
BCR420UW6-7 by Diodes Inc. is a small outline LED display driver with 6 terminals and matte tin finish. It operates b/w -55°C to 150°C, has a peak reflow temp of 260°C, and measures 3mm in length. Ideal for graphics displays, this driver offers true output polarity and standard input characteristics.
BCR450E6327HTSA1
Infineon's BCR450E6327HTSA1 is a 6-terminal LED display driver with a max supply voltage of 27V and min of 8V. Its small outline, thin profile package makes it ideal for graphics applications requiring precise control over LED displays. The device features bipolar technology, gull wing terminals, and is surface mountable for compact designs.
BCR405UE6327HTSA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Terminal Finish: TIN;
BCR402UE6433HTMA1
BCR402UE6433HTMA1 by Infineon Technologies is a LED display driver with 6 terminals, 1 function, and 10V supply voltage. It comes in a small outline package shape with tin terminal finish. Ideal for graphics display applications due to its compact size and gull wing terminal form.
BCR420UW6Q-7
BCR420UW6Q-7 by Diodes Inc. is a small outline LED display driver with 6 terminals, matte tin finish, and AEC-Q101 screening level. It has a nominal voltage of 3.3V, 2 segments, and is suitable for graphics display applications in automotive electronics due to its low profile design and high peak reflow temperature of 260°C.
BCR401WH6327XTSA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: VSOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.3 mm;
BCR402RE6327HTSA1
BCR402RE6327HTSA1 by Infineon Technologies is a small outline, thin profile LED display driver with 4 terminals and a max seated height of 1.1 mm. It operates at a nominal voltage of 10 V and is suitable for graphics display applications.
BCR420UE6327
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
BCR401RE6327HTSA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TSSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
BCR421UFD-7
LED DISPLAY DRIVER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
BCR401UW6-7
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): 30;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved