Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MICROCONTROLLER; Terminal Form: BALL; No. of Terminals: 292; Package Code: LFBGA; Package Shape: SQUARE; Maximum Supply Voltage: 1.43 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Q Components
Corphita
Microcontrollers SAL-TC237LP-32F200NAC attributes and parameters. Explore more Microcontrollers devices from Infineon Technologies
ADC Channels:
Bit Size:
Boundary Scan:
CPU Family:
Maximum Clock Frequency:
DAC Channels:
DMA Channels:
Format:
Integrated Cache:
JESD-30 Code:
JESD-609 Code:
Length:
Low Power Mode:
Moisture Sensitivity Level (MSL):
No. of DMA Channels:
No. of Serial I/Os:
No. of Terminals:
No. of Timers:
On Chip Data RAM Width:
On Chip Program ROM Width:
Maximum Operating Temperature:
Minimum Operating Temperature:
PWM Channels:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
RAM Bytes:
ROM Words:
ROM Programmability:
Screening Level:
Maximum Seated Height:
Speed:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
Data EEPROM Size:
Connectivity:
Peripherals:
Analog To Digital Convertors:
SAL-TC237LP-32F200NAC Peripheral ICs trade compliance attributes, and parameters.
ECCN
3A991.A.2
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
LL4148
Silicon Standard
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Leshan Radio
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Formosa Microsemi
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MC9S12A256CPVE
NXP Semiconductors
MC9S12A256CPVE by NXP Semiconductors is a 16-bit microcontroller with 19-bit address bus width, operating at max 16 MHz. Ideal for industrial applications, it features 262144 ROM words, 12288 RAM bytes, and PWM channels for precise control in various electronic systems.
STM32U585CIU6Q
MICROCONTROLLER, RISC;
STM32F437ZIT6
STM32F437ZIT6 by STMicroelectronics is a 32-bit microcontroller with 144 terminals, operating at up to 50 MHz. It features 262KB RAM, 2 DAC channels, and 24 ADC channels. Ideal for industrial applications requiring high-speed processing and extensive connectivity options like USB, Ethernet, and UART.
ATSAMD21G18A-AF
Atmel
MICROCONTROLLER, RISC; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TFQFP; Package Shape: SQUARE;
STM32F107RCT6
STM32F107RCT6 by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at up to 50 MHz. It features DAC and ADC channels, DMA support, and 65536 bytes of RAM. Ideal for industrial applications requiring a powerful Cortex-M3 CPU with low power consumption and high-speed performance.
STM32G474RCT6
STM32G474RCT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max clock frequency of 48 MHz. It features 131072 bytes of RAM, 26-channel 12-bit ADC, and connectivity options like FDCAN, I2C, SPI, UART, and USB. This microcontroller is suitable for industrial applications requiring low power mode and high-speed processing.
MSP430F6736IPZR
Texas Instruments
MSP430F6736IPZR by Texas Instruments is a 16-bit microcontroller with 131072 ROM words and 8 RAM words. It features 5-Ch 10-Bit ADC channels, 3 DMA channels, and PWM support. Ideal for industrial applications requiring low power consumption and connectivity via I2C, IRDA, SPI, and UART interfaces.
STM32H743VIT6
STM32H743VIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 1085440 bytes RAM, and 16-Ch 16-Bit ADC. Ideal for industrial applications requiring high-speed processing, it features 21 timers, CAN/I2C/UART connectivity, and low power mode support. With a max clock frequency of 48 MHz and extensive peripheral options, it offers versatile performance in compact form factor.
STM32F103ZCT6
STM32F103ZCT6 by STMicroelectronics is a 32-bit microcontroller with 144 terminals, operating at 16 MHz. It features 2 DAC and 21 ADC channels, suitable for industrial applications requiring CAN, I2C, SPI connectivity. With ROM of 262144 words and RAM of 49152 bytes, it offers versatile performance in compact dimensions.
MK60DN512VLL10
Freescale Semiconductor
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
ATMEGA168PA-AU
Microchip Technology
ATMEGA168PA-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 1024 RAM bytes. Ideal for industrial applications requiring low power mode, with SPI, TWI, USART connectivity and 8-Ch 10-Bit ADC channels.
ATXMEGA256A3BU-AU
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
ATMEGA2560-16AUR
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
PIC10F200T-I/OT
PIC10F200T-I/OT by Microchip: 8-bit RISC CPU, 256 ROM words, 16 RAM bytes. Ideal for low-power applications with 4.2 MHz clock frequency and flash ROM programmability. Suitable for industrial use with -40 to 85 °C operating temperature range.
TMS5703137DPGEQQ1
TMS5703137DPGEQQ1 by Texas Instruments is a 32-bit microcontroller with 144 terminals, operating at up to 80 MHz. Ideal for automotive applications, it features 24-Ch 12-Bit ADCs, CAN, Ethernet, and low power mode. With on-chip ROM of 3145728 words and RAM of 256 words, this Cortex-R4F CPU family device offers high performance in a compact package.
AT89C51ED2-RLTUM
AT89C51ED2-RLTUM by Microchip: 8-bit, 40 MHz microcontroller with 16-bit address bus. Ideal for industrial applications, featuring 2048 bytes of RAM and flash ROM programmability. Package style is flatpack, low profile with a max seated height of 1.6 mm.
ATMEGA328P-PU
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR;
TMS320F28379DZWTS
TMS320F28379DZWTS by Texas Instruments is a 32-bit microcontroller with 3 DAC channels, 12 ADC channels, and 6 timers. Ideal for automotive applications, it operates at up to 100 MHz with low power mode support. Featuring a max supply voltage of 1.26 V and package style in grid array form.
STM32F405VGT6V
STM32F405VGT6V by STMicroelectronics is a 32-bit microcontroller with 100 terminals, 82 I/O lines, and ADC/DMA channels. Operating at 16 MHz with a supply voltage range of 1.8-3.6 V, it's ideal for applications requiring high-speed processing and precise analog-to-digital conversion in compact designs.
STM32H743IIK6
STM32H743IIK6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 1085440 bytes RAM, and 2097152 ROM words. It features 32-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN(2), I2C(4), UART(4). Ideal for industrial applications requiring high-speed processing and low power consumption.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SAL-TC267D-40F200NBC
Infineon Technologies
MICROCONTROLLER; Terminal Form: BALL; No. of Terminals: 292; Package Code: LFBGA; Package Shape: SQUARE; No. of DMA Channels: 48;
SAL-TC233L-32F200FAC
MICROCONTROLLER; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: HTFQFP; Package Shape: SQUARE; JESD-30 Code: S-PQFP-G100;
SAL-TC213L-8F133NAC
MICROCONTROLLER; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: HTFQFP; Package Shape: SQUARE; Width: 12 mm;
SAL-TC264D-40F200NBC
MICROCONTROLLER; Terminal Form: GULL WING; No. of Terminals: 144; Package Code: HLFQFP; Package Shape: SQUARE; DMA Channels: YES;
SAL-TC233LP-32F200NAC
MICROCONTROLLER; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: HTFQFP; Package Shape: SQUARE; Integrated Cache: YES;
SAL-TC224L-16F133FAC
MICROCONTROLLER; Terminal Form: GULL WING; No. of Terminals: 144; Package Code: HTFQFP; Package Shape: SQUARE; Technology: CMOS;
SAL-TC275TP-64F200NDC
MICROCONTROLLER; Terminal Form: GULL WING; No. of Terminals: 176; Package Code: HLFQFP; Package Shape: SQUARE; Maximum Supply Voltage: 1.43 V;
SAL-TC1766-192F80UBD
MICROCONTROLLER; Technology: CMOS;
SAL-TC233LP-32F200FAC
SAL-TC222L-16F133NAC
MICROCONTROLLER; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: HTFQFP; Package Shape: SQUARE; Additional Features: 14 CH ADC AVAILABLE;
SAL-TC237LP-32F200SAC
MICROCONTROLLER; Terminal Form: BALL; No. of Terminals: 292; Package Code: LFBGA; Package Shape: SQUARE; Format: FLOATING-POINT;
SAL-TC237L-32F200SAC
MICROCONTROLLER; Terminal Form: BALL; No. of Terminals: 292; Package Code: LFBGA; Package Shape: SQUARE; JESD-30 Code: S-PBGA-B292;
SAL-TC223S-16F133FAC
MICROCONTROLLER; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: HTFQFP; Package Shape: SQUARE; No. of I/O Lines: 78;
SAL-TC265D-40F200NBC
MICROCONTROLLER; Terminal Form: GULL WING; No. of Terminals: 176; Package Code: HLFQFP; Package Shape: SQUARE; Minimum Supply Voltage: 1.17 V;
SAL-TC212L-8F133NAC
MICROCONTROLLER; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: HTFQFP; Package Shape: SQUARE; External Data Bus Width: 0;
SAL-TC224L-16F133NAC
MICROCONTROLLER; Terminal Form: GULL WING; No. of Terminals: 144; Package Code: HTFQFP; Package Shape: SQUARE; Format: FLOATING POINT;
SAL-TC1766-192F80U
MICROCONTROLLER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 231; Package Code: DIE; Package Shape: RECTANGULAR;
SAL-TC1766-192F80UBF
MICROCONTROLLER; Terminal Form: NO LEAD; No. of Terminals: 231; Package Code: DIE; Package Shape: RECTANGULAR; External Data Bus Width: 0;
SAL-TC223L-16F133NAC
MICROCONTROLLER; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: HTFQFP; Package Shape: SQUARE; Peripherals: DMA(16), RTC, TIMER(3), WDT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved