Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Lens Type: CLEAR; Maximum Reverse Voltage: 5 V; Maximum Forward Voltage: 2.6 V; Maximum Operating Temperature: 100 Cel; Size: 2.4 mm;
Median Price
$0.902
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Component Electronics Inc.
1+ parts
$1.540
100+ parts
$1.150
1k+ parts
$1.000
10k+ parts
-
R&J Components
Semi Source
Bristol Electronics
$0.263
$0.105
ECAB
Digiode
Vyrian
LittleDiode
Modulus Dynamics
$0.099
$0.095
$0.091
Assy Fe
Corphita
Visible LEDs LSA670-K attributes and parameters. Explore more Visible LEDs devices from Infineon Technologies
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Viewing Angle:
LSA670-K Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM317AEMP/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
Sangdest Microelectronics (Nanjing)
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
EU2B-YS3203F
Idec
ROTARY SWITCH;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
HLMP-1503-C0002
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.8; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
MCL-S270GC
Multicomp Pro
MCL-S270GC by Multicomp Pro is a 1.4mm GREEN LED with peak wavelength of 568nm and viewing angle of 140°. Ideal for surface mount applications, it has a luminous intensity of 10.0mcd and operates b/w -40 to 85 °C temperatures.
HSMA-C190
Broadcom
HSMA-C190 by Broadcom is a 1mm single color LED with a peak wavelength of 595nm and a viewing angle of 170°. It is commonly used in surface mount applications for its amber color and max forward voltage of 2.4V.
598-8281-107F
Dialight
Dialight's 598-8281-107F is a 2mm single color LED with max forward current of 0.025A. With water clear lens and green color, it has viewing angle of 140°. Ideal for surface mount applications, operating temp range from -30 to 85 °C.
LTST-C190KSKT
Lite-on Technology
LTST-C190KSKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with peak wavelength of 588nm, emitting YELLOW light. It has a max forward current of 0.03A and viewing angle of 130°. Ideal for surface mount applications requiring high luminous intensity up to 104mcd in a compact form factor.
HLMP-3301-F00B2
HLMP-3301-F00B2 by Broadcom is a 5mm single color LED with peak wavelength of 635nm. With a max forward current of 0.03A, it's ideal for applications requiring high efficiency red light emission and has a viewing angle of 60°. Perfect for radial mounting in various electronic devices.
SSL-LX3044AD-12V
Lumex
SSL-LX3044AD-12V by Lumex is a 3mm single color LED with peak wavelength of 605nm and 15.0mcd luminous intensity. Ideal for applications requiring amber light, it has a diffused lens, operates at -40 to 85°C, and features radial mounting.
LGT676-P2R1-24-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LGT676-P2R1-24-Z is a 2.4mm SINGLE COLOR LED with peak wavelength of 572nm and viewing angle of 120°. Ideal for surface mount applications, it has a max forward current of 0.03A and nominal luminous intensity of 98.0mcd, making it suitable for various visible LED lighting projects.
SML-D12U8WT86S
ROHM
ROHM's SML-D12U8WT86S is a 1.2mm SINGLE COLOR LED with MILKY WHITE lens, emitting RED light at 63.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 85°C, suitable for surface mount applications in various electronic devices.
SML-LX1206GC-TR
SML-LX1206GC-TR by Lumex is a 2mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.025A and forward voltage of 2.8V, suitable for surface mount applications in electronics, signage, and indicator lights due to its water clear lens and green color at wavelength.
LGT670-K1L2-1-Z
Osram Opto Semiconductors LGT670-K1L2-1-Z is a 2.4mm SINGLE COLOR LED with peak wavelength of 572nm, forward current of 0.03A, and luminous intensity of 12.55mcd. Ideal for surface mount applications in green light displays due to its colorless clear lens and wide 120° viewing angle.
AAA3528LSEEZGKQBKS
Kingbright Electronic
Kingbright Electronic's AAA3528LSEEZGKQBKS is a 2.4mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 630/515/460nm. It has a max forward current of 0.03A and viewing angle of 120°, suitable for surface mount applications in hyper red/green/blue lighting scenarios.
LTST-C170KRKT-5A
SINGLE COLOR LED;
4501-2-2-001
Microprecision Electronics Sa
CLX6F-FKC-CNP1ST1E1BB7D3D3
Wolfspeed
Wolfspeed's CLX6F-FKC-CNP1ST1E1BB7D3D3 is a triple color LED with separate 3-element configuration. It has max forward current of 0.035A, forward voltage of 2.6V, and nominal luminous intensity of 877.5/1405.0/267.5 mcd. Ideal for surface mount applications requiring red/green/blue illumination in a compact square shape at temperatures ranging from -40 to 85°C.
APT2012SRCPRV
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 660;
553-0133F
Dialight's 553-0133F is a 3mm yellow LED array with 2 separate elements. It has a peak wavelength of 585nm, forward current of 0.02A, and luminous intensity of 6.3mcd. Ideal for applications requiring a single color light source with radial mounting in electronics or signaling devices.
CLVBA-FKA-CAEDH8BBB7A363
Cree Led
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 147.5/295.0/74.0; Maximum Forward Voltage: 2.4 V; Minimum Operating Temperature: -40 Cel;
3013
Nte Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.7; Lens Type: CLEAR JEWEL; Viewing Angle: 20 deg;
LGR971-Z
The Osram Opto Semiconductors LGR971-Z is a single color LED with peak wavelength of 572nm, forward current of 0.025A, and max forward voltage of 2.5V. Ideal for applications requiring green light emission in compact spaces due to its small size (1.4mm) and surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LSA676-P2S1-1-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 140.0; Lens Type: COLORLESS CLEAR; Shape: ROUND;
LSA676-P2S1-1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 140.0; Lens Type: COLORLESS CLEAR; Terminal Finish: Tin/Nickel (Sn/Ni);
LSA676-Q1R2-1-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 125.5; Lens Type: COLORLESS CLEAR; No. of Functions: 1;
LSA67K-J1K2-1-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 7.85; Lens Type: COLORLESS CLEAR; Viewing Angle: 120 deg;
LSA676-Q1R2-1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 125.5; Lens Type: COLORLESS CLEAR; Terminal Finish: Tin/Nickel (Sn/Ni);
LSA676-R1S1-1
LSA676-R1S1-1 by Osram Opto Semiconductors is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for applications requiring super red light emission, such as indicator lights in automotive or electronic devices due to its high luminous intensity of 168.0mcd at a viewing angle of 120°.
LSA67K-K1L2-1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.55; Lens Type: COLORLESS CLEAR; Terminal Finish: Tin/Nickel (Sn/Ni);
LSA672-LP
Infineon Technologies
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .05 A; Maximum Reverse Voltage: 5 V; Size: 2.4 mm;
LSA672-N
SINGLE COLOR LED; Lens Type: CLEAR; Peak Wavelength (nm): 635; Viewing Angle: 120 deg; Shape: ROUND; Height: 3.6 mm;
LSA676-Q
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 120 deg; Maximum Forward Current: .02 A; Color: SUPER RED;
LSA672-NR
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Configuration: SINGLE; Maximum Reverse Voltage: 5 V;
LSA670-HL
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 635; Maximum Forward Voltage: 2.6 V; Configuration: SINGLE;
LSA670-JM
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Color: SUPER RED; Color At Wavelength: Red;
LSA672-P
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Color: SUPER RED; Maximum Reverse Voltage: 5 V; Shape: ROUND;
LSA676-PS
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Voltage: 3 V; Maximum Forward Current: .02 A;
LSA670-J2L1-1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 635; Color At Wavelength: Orange-Red; Maximum Operating Temperature: 100 Cel;
LSA676-N2P2-1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Voltage: 3 V; Maximum Forward Voltage: 2.4 V; Peak Wavelength (nm): 645;
LSA676-NR
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Shape: ROUND; Maximum Forward Voltage: 2.6 V; Height: 3.8 mm;
LSA676-P
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Shape: ROUND; Maximum Reverse Voltage: 3 V; Color: SUPER RED;
LSA679-F2G2-1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: COLORLESS CLEAR; Terminal Finish: Tin (Sn);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved