Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Osram Opto Semiconductors' LSA67K-J1K2-1-Z is a 2.4mm SINGLE COLOR LED with peak wavelength of 643nm and viewing angle of 120°. Ideal for applications requiring super red light emission, such as automotive lighting and signage displays.
Median Price
$0.141
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$0.094
100+ parts
$0.063
1k+ parts
-
10k+ parts
Conrad
$0.119
DigiKey
$0.430
Avnet
Nova Conductors
$0.110
Velocity Electronics
Vyrian
ComSIT Distribution GmbH
ComSIT USA
Semicontronic
$0.080
$0.078
Argo Parts USA
$0.107
Continental Prestige Electronics
$0.108
Netroflash
Aztec Data Supply Inc.
$0.260
Perfect Parts
Corohmni
Cyclops Electronics Ltd (Excess)
Single configuration makes it easy to use and install in various projects.
Compact size allows for flexibility in placement and design of products.
Low forward current consumption helps in energy efficiency.
Specific peak wavelength ensures consistency in color output.
Clear lens provides a clean and unobstructed view of the LED.
Single color LED simplifies usage and integration into projects.
Having only 2 terminals makes it easy to connect and use.
High maximum operating temperature ensures reliability and durability.
Low height allows for versatile placement options in products.
Round shape provides a classic and uniform appearance.
Low minimum operating temperature allows for use in various environments.
Vibrant super red color adds aesthetic appeal to the LED output.
TR packaging method ensures safe transportation and storage of LEDs.
Optimal terminal pitch for easy connection and compatibility with different setups.
Wide viewing angle allows for better visibility and light dispersion.
High luminous intensity ensures bright and visible output.
Surface mount feature simplifies installation and integration into PCBs.
Visible LEDs LSA67K-J1K2-1-Z attributes and parameters. Explore more Visible LEDs devices from Osram Opto Semiconductors
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
LSA67K-J1K2-1-Z Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
ams OSRAM is a global leader in optical solutions. We offer a unique product and technology portfolio for sensing, illumination and visualization: from prime-quality light emitters and optical components to micro-modules, light sensors, ICs and related software. Designing pioneering optical solutions that inspire our customers is what we do best. We are known for our imagination and deep engineering expertise. As trusted partner serving the entire value chain of optical solutions, we enable our customers in the consumer, automotive, industrial and healthcare sectors maintain their competitive edge. We add intelligence to light and passion to innovation to enrich people’s lives.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Rectron
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
CC0603KRX7R9BB103
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Laube Technology
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Sangdest Microelectronics (Nanjing)
HLMP-3301-D0000
Broadcom
HLMP-3301-D0000 by Broadcom is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high efficiency red light emission in bulk packaging, with radial mounting feature.
HLMP-1790
Fairchild Semiconductor's HLMP-1790 is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.0075A and forward voltage of 2.2V, suitable for applications requiring diffused green light emission in a radial mount configuration.
MLCAWT-A1-0000-000XE5
Cree Led
SINGLE COLOR LED; Maximum Operating Temperature: 150 Cel; Maximum Forward Current: .35 A; Maximum Reverse Voltage: 5 V; Height: 1.2 mm; Color At Wavelength: White;
LST676-P2S1-1-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LST676-P2S1-1-Z is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for applications requiring super red light emission, such as indicator lights in automotive or electronic devices.
KP-1608SRC-PRV
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
150-22
Sloanled
Visible LEDs;
553-0112-200F
Dialight
Dialight's 553-0112-200F is a dual color LED array with separate, 2-element configuration. Featuring peak wavelengths of 635nm (red) and 565nm (green), it has a size of 3mm and nominal luminous intensities of 10.0/12.6 mcd. Ideal for applications requiring radial mounting, this LED array is suitable for visual indication in various electronic devices.
SML-LX0603YW-TR
Lumex
SML-LX0603YW-TR by Lumex is a 1mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.03A and viewing angle of 160°. Ideal for surface mount applications, it emits yellow light with luminous intensity of 14.0mcd, suitable for various electronic devices.
HLMP1301
National Semiconductor
HLMP1301 by National Semiconductor is a red visible LED with peak wavelength of 635nm and max forward current of 0.02A. With diffused lens type, it has min luminous intensity of 60cd and operates b/w -55 to 100°C. Ideal for applications requiring precise red light emission in a compact form factor.
HSMF-C165
HSMF-C165 by Broadcom is a 1.6mm dual-color LED with peak wavelengths of 630nm/570nm, ideal for applications requiring high efficiency red/green illumination. With a max forward current of 0.02A and viewing angle of 120°, it's suitable for surface mount configurations in various electronic devices operating b/w -30°C to 85°C.
HLMP4740
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Maximum Forward Voltage: 2.2 V; Maximum Forward Current: .007 A;
APT1608LZGCK
Kingbright Electronic
Kingbright Electronic's APT1608LZGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 515nm and 50.0mcd luminous intensity. Ideal for surface mount applications, it operates b/w -40 to 85°C, making it suitable for various visible LED lighting projects.
598-8810-307F
Dialight's 598-8810-307F is a 2mm COMMON ANODE TRIPLE COLOR LED with WATER CLEAR lens. It has a max forward current of 0.02A and operates b/w -40 to 100 °C. Ideal for applications requiring RGB illumination with a viewing angle of 160° and surface mounting feature.
LXR7-SW65
Lumileds Holding B V
SINGLE COLOR LED;
550-0405F
Dialight 550-0405F is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.04A and viewing angle of 60°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
MCL-S270GC
Multicomp Pro
MCL-S270GC by Multicomp Pro is a 1.4mm GREEN LED with peak wavelength of 568nm and viewing angle of 140°. Ideal for surface mount applications, it has a luminous intensity of 10.0mcd and operates b/w -40 to 85 °C temperatures.
553-0312F
Dialight's 553-0312F is a dual color LED array with separate configuration, 3mm size, and built-in resistor. With red/green colors at peak wavelengths of 650/563nm, it has max forward current of 0.02A. Ideal for applications requiring radial mounting such as indicator lights in electronics.
HLMP-1301
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .03 A; Height: 4 mm; Maximum Operating Temperature: 100 Cel;
Quality Technologies
SINGLE COLOR LED; Minimum Operating Temperature: -55 Cel; Color: HIGH EFFICIENCY RED; Shape: ROUND; Size: 3 mm; Configuration: SINGLE;
HSME-C170
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LSA676-P2S1-1-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 140.0; Lens Type: COLORLESS CLEAR; Shape: ROUND;
LSA676-P2S1-1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 140.0; Lens Type: COLORLESS CLEAR; Terminal Finish: Tin/Nickel (Sn/Ni);
LSA676-Q1R2-1-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 125.5; Lens Type: COLORLESS CLEAR; No. of Functions: 1;
LSA676-Q1R2-1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 125.5; Lens Type: COLORLESS CLEAR; Terminal Finish: Tin/Nickel (Sn/Ni);
LSA676-R1S1-1
LSA676-R1S1-1 by Osram Opto Semiconductors is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for applications requiring super red light emission, such as indicator lights in automotive or electronic devices due to its high luminous intensity of 168.0mcd at a viewing angle of 120°.
LSA67K-K1L2-1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.55; Lens Type: COLORLESS CLEAR; Terminal Finish: Tin/Nickel (Sn/Ni);
LSA672-LP
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .05 A; Maximum Reverse Voltage: 5 V; Size: 2.4 mm;
LSA672-N
SINGLE COLOR LED; Lens Type: CLEAR; Peak Wavelength (nm): 635; Viewing Angle: 120 deg; Shape: ROUND; Height: 3.6 mm;
LSA676-Q
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 120 deg; Maximum Forward Current: .02 A; Color: SUPER RED;
LSA672-NR
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Configuration: SINGLE; Maximum Reverse Voltage: 5 V;
LSA670-HL
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 635; Maximum Forward Voltage: 2.6 V; Configuration: SINGLE;
LSA670-JM
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Color: SUPER RED; Color At Wavelength: Red;
LSA672-P
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Color: SUPER RED; Maximum Reverse Voltage: 5 V; Shape: ROUND;
LSA676-PS
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Voltage: 3 V; Maximum Forward Current: .02 A;
LSA670-J2L1-1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 635; Color At Wavelength: Orange-Red; Maximum Operating Temperature: 100 Cel;
LSA676-N2P2-1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Voltage: 3 V; Maximum Forward Voltage: 2.4 V; Peak Wavelength (nm): 645;
LSA670-K
SINGLE COLOR LED; Lens Type: CLEAR; Maximum Reverse Voltage: 5 V; Maximum Forward Voltage: 2.6 V; Maximum Operating Temperature: 100 Cel; Size: 2.4 mm;
LSA676-NR
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Shape: ROUND; Maximum Forward Voltage: 2.6 V; Height: 3.8 mm;
LSA676-P
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Shape: ROUND; Maximum Reverse Voltage: 3 V; Color: SUPER RED;
LSA67K-J1K2-1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 7.85; Lens Type: COLORLESS CLEAR; Terminal Finish: Tin/Nickel (Sn/Ni);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved