Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ITS711L1 by Infineon is a peripheral driver with 20 terminals, MOS technology, and built-in protections for over/under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. Ideal for applications requiring buffer or inverter-based peripheral drivers.
Median Price
$5.130
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$3.270
1k+ parts
$2.960
10k+ parts
$2.770
Bürklin Elektronik
-
Vyrian
$4.400
TME
$4.780
$3.160
$2.870
Digiode
$4.826
Nova Conductors
Ampacity Inc.
$4.320
Corphita
$4.572
Modulus Dynamics
$14.564
$13.981
$13.399
A-Z Elektronik GmbH
Alle Elektronik GmbH
Authorized Procurement Solutions
Assy Fe
Netroflash
Cyclops Electronics Ltd (Excess)
Plastic/Epoxy material provides durability and resistance to external elements, making the product long-lasting.
Surface mount capability allows for easy installation on PCBs, improving efficiency and reducing assembly time.
Built-in protections ensure the safety of the connected devices by preventing damage due to voltage fluctuations or excess current.
High maximum operating temperature range allows for reliable performance in various environments without risk of overheating.
Stable supply voltage of 12V ensures consistent and reliable power delivery to connected peripherals.
Fast turn-on time of 400 us ensures quick response and activation of peripherals when needed.
Peripheral Drivers ITS711L1 attributes and parameters. Explore more Peripheral Drivers devices from Infineon Technologies
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Turn-off Time:
Turn-on Time:
Width:
ITS711L1 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
International Semiconductor
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
2N2222A
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
STM32H743XIH6
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Itt Semiconductor
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
Diotec Semiconductor Ag
ULN2003ADG4
ULN2003ADG4 by Texas Instruments is a 7-bit buffer/inverter-based peripheral driver with open-collector output polarity. It operates b/w -40 to 125°C, supports a nominal voltage of 50V, and has built-in transient protections. Widely used in applications requiring sink current flow direction and standard input characteristics.
BSP742RXT
Infineon Technologies
BSP742RXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 13.5 V and has a turn-on time of 140 us. This rectangular package style IC is ideal for buffer or inverter based applications requiring sink output current flow direction.
IRS2153DSPBF
IRS2153DSPBF by Infineon Technologies is a CMOS half bridge peripheral driver with 8 terminals. It operates b/w -40 to 125 °C and supports a supply voltage range of 10.1-15.4 V. Ideal for automotive applications, it offers under voltage protection and source/sink current flow direction.
ITS4200SSJDXUMA1
ITS4200SSJDXUMA1 by Infineon is a peripheral driver with 8 terminals, operating voltage range of 6-52V, and built-in protections for various faults. It is designed for automotive applications, featuring a small outline package style and sink output current flow direction. With a turn-on time of 180us and turn-off time of 200us, it provides efficient buffering or inverting functions in automotive systems.
ISP752TFUMA1
Infineon's ISP752TFUMA1 is a Peripheral Driver with 8 terminals, offering built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 6-52 V. Ideal for applications requiring a small outline package style and source output current flow direction.
VNI4140K
VNI4140K by STMicroelectronics is a 24V peripheral driver with 4 functions, built-in protections, and 1.3A output current limit. It comes in a small outline package with gull wing terminals for sink flow direction applications. Ideal for driving various peripherals in electronic systems requiring reliable protection and control features.
ULN2803AN
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; No. of Functions: 1;
ULN2003AINSR
ULN2003AINSR by Texas Instruments is a 7-bit peripheral driver with open-collector output, max supply voltage of 3V, and built-in transient protection. It has a turn-on/off time of 10us and nominal output peak current limit of 0.5A. Ideal for applications requiring sink current flow direction in compact designs with surface mount capability.
BSP76E6433HUMA1
BSP76E6433HUMA1 by Infineon is a MOS technology-based peripheral driver with built-in protections for transient, over current, and over voltage. It operates in industrial temperature range (-40 to 85°C) with a nominal voltage of 12V. This small outline package (6.5x3.5x1.8mm) is surface mountable and suitable for buffer or inverter based applications requiring a peak output current limit of 1.8A.
IPS2050HQ-32
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
VND7050AJTR-E
VND7050AJTR-E by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w 4-28 V with turn-on/off times of 120/100 us. Ideal for applications requiring sink output current flow direction in a compact rectangular package.
ISO8200B
ISO8200B by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 10.5-36 V, making it suitable for automotive applications requiring a nominal output peak current limit of 1.1 A.
BTT60502ERAXUMA1
BTT60502ERAXUMA1 by Infineon Technologies is a Peripheral Driver with 2 functions, operating at 5-36 V. It offers built-in protections against transient, over current, and over voltage. This small outline driver is ideal for automotive applications requiring a nominal output peak current limit of 3 A.
BTS428L2ATMA1
BTS428L2ATMA1 by Infineon is a 4-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 12V with a max of 41V. With a turn-on/off time of 200us, it's ideal for applications requiring a sink output current flow direction in small outline packages.
BTS4141N
BTS4141N by Infineon is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 12V to 24V and has a max supply voltage of 45V. With a small outline package style suitable for automotive applications, it offers a nominal output peak current limit of 1.8A.
VNQ7003SYTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
TPS2H000BQPWPRQ1
TPS2H000BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It has built-in protections for transient, over current, thermal & under voltage. Ideal for automotive applications due to AEC-Q100 screening & high side driver feature.
DRV104PWPRG4
DRV104PWPRG4 by Texas Instruments is a PWM-based peripheral driver with a max supply voltage of 32V and built-in protections for overcurrent and thermal issues. With a nominal output peak current limit of 2A, it is ideal for industrial applications requiring precise control of peripherals. This small outline package with gull wing terminals operates in temperatures ranging from -40 to 85°C.
ULN2003F12FN-7
Diodes Incorporated
Diodes Inc. ULN2003F12FN-7 is a 7-bit buffer/inverter peripheral driver with open-collector output, suitable for automotive applications. It operates b/w -40°C to 125°C, supports a supply voltage of 20V, and has a turn-on time of 0.14us. The package is small outline with very thin profile and surface-mountable, making it ideal for space-constrained designs.
AUIPS7111STRL
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ITS711L1FUMA1
ITS711L1FUMA1 by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. This small outline package IC is ideal for buffer or inverter based applications requiring source and sink output current flow control.
ITS711L1XT
ITS711L1XT by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. This small outline package IC is ideal for buffer or inverter based applications requiring source and sink output current flow direction.
ITS716GFUMA1
ITS716GFUMA1 by Infineon Technologies is a Peripheral Driver with 4 functions, operating at 5.5-40V. It offers built-in protections for transient, over current, and over voltage events. Ideal for applications requiring a small outline package and sink output current flow direction.
ITS716GXT
ITS716GXT by Infineon Technologies is a Peripheral Driver with 4 functions, operating at 5.5-40V. It offers built-in protections against transient, over current, and over voltage events. Ideal for applications requiring a small outline package and sink output current flow direction.
ITS724GFUMA1
ITS724GFUMA1 by Infineon Technologies is a peripheral driver with 4 functions. It has a max supply voltage of 40V and can operate in temperatures ranging from -30°C to 85°C. This IC type is commonly used as a buffer or inverter based peripheral driver.
ITS716G
ITS716G by Infineon Technologies is a Peripheral Driver with 4 functions, operating at 5.5-40V, ideal for commercial applications. It offers built-in protections against transient, over current, and over voltage events, with a turn-on time of 250us and turn-off time of 270us. This small outline driver has a nominal output peak current limit of 0.7A and operates in temperatures ranging from -30 to 85°C.
ITS724GXT
ITS724GXT by Infineon Technologies is a Peripheral Driver with 4 functions, operating voltage range of 5.5V to 40V, and built-in protections for transient, over current, over voltage, thermal, and under voltage. This small outline package IC is ideal for applications requiring sink output current flow direction and interface buffer or inverter based peripheral driver type.
ITS724G
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved