Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
IR2153SPBF by Infineon is a MOSFET gate driver with a supply voltage range of 10-16.8V, ideal for automotive applications. It features a CMOS technology, small outline package style, and dual terminal position for efficient high side driving. With an operating temperature range of -40 to 125°C, it offers reliable performance in various environments.
Median Price
$2.120
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$1.135
100+ parts
$1.078
1k+ parts
10k+ parts
-
Chip1Stop
$1.340
Newark
$1.300
$1.050
$1.010
Mouser Electronics
$2.210
$1.290
$1.170
$1.090
Arrow
$2.313
$1.312
$1.134
$1.028
Farnell
$2.640
$1.350
$0.932
$0.858
Element14
$3.330
$2.200
$1.530
$1.410
Verical
$1.255
$1.118
$1.064
Flip Electronics (Authorized)
Rochester
$1.080
$0.962
Digiode
$1.007
Nova Conductors
$1.160
Maritex
$2.334
$1.556
$1.251
Chip Stock
Flip Electronics
Vyrian
Rutronik
$1.450
$1.280
Schukat
$0.860
Micros
$1.176
Partservice
$1.178
ComSIT Distribution GmbH
Ampacity Inc.
$0.202
Semicontronic
$0.900
$0.878
$0.873
Corphita
$0.954
Modulus Dynamics
$1.102
$1.058
$1.014
Corohmni
Advanced Electronics
Aranea Global
$1.137
$1.091
Argo Parts USA
$1.150
Continental Prestige Electronics
$2.240
Aztec Data Supply Inc.
$4.919
Authorized Procurement Solutions
Lixinc
Perfect Parts
A-Z Elektronik GmbH
Alle Elektronik GmbH
Glotronic Ltd.
GreenTree Electronics
Futuretech Components
Kepictronics
Assy Fe
The use of plastic/epoxy body material makes this product lightweight and durable, ideal for various applications.
Surface mount capability allows for easy and convenient installation, saving time and effort.
With a high maximum supply voltage, this product can handle power requirements of different systems effectively.
The rectangular package shape makes it easy to integrate this product into circuit designs efficiently.
The 12V power supply ensures compatibility with standard power sources in many applications.
Having 8 terminals allows for multiple connections and configurations, increasing the versatility of this product.
The matte tin finish provides good conductivity and corrosion resistance for reliable performance.
With a high maximum operating temperature, this product can withstand demanding environmental conditions.
CMOS technology offers low power consumption and high noise immunity, making this product efficient and reliable.
Designed for automotive applications, this product meets the stringent requirements of the automotive industry for quality and performance.
MOSFET Gate Drivers IR2153SPBF attributes and parameters. Explore more MOSFET Gate Drivers devices from Infineon Technologies
High Side Driver:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
IR2153SPBF Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
EU2B-YS3203C
Idec
ROTARY SWITCH;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
Fagor Electronica S Coop
IR21814SPBF
Infineon Technologies
IR21814SPBF by Infineon is a MOSFET gate driver with a max supply voltage of 20V and high side driver feature. With a turn-on time of 0.27us, it's ideal for automotive applications due to its temperature grade and interface IC type as a half bridge based MOSFET driver.
IR2110STRPBF
IR2110STRPBF by Infineon Technologies is a MOSFET gate driver with a max supply voltage of 20V and high side driver feature. It has a turn-on time of 0.15us and turn-off time of 0.125us, making it ideal for automotive applications requiring precise control over power supplies up to 520V. With a compact small outline package style, this CMOS technology-based driver is designed for high-performance systems in harsh environments.
UCC21521DWR
UCC21521DWR by Texas Instruments is a MOSFET gate driver with a max supply voltage of 18V. It has 2 channels and can handle a max output current of 6A. This driver is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
IR2110S
IR2110S by Infineon Technologies is a MOSFET Gate Driver with a max supply voltage of 20V and high side driver feature. It has a turn-on time of 0.15us and turn-off time of 0.125us, making it ideal for automotive applications requiring fast switching speeds. With a small outline package style and dual terminal position, this CMOS technology driver is suitable for various surface mount designs in the automotive industry.
EL7457CLZ-T13
Renesas Electronics
EL7457CLZ-T13 by Renesas Electronics is a MOSFET Gate Driver with 4 functions, operating temperature range of -40 to 85°C. It features CMOS technology, quad terminal position, and is suitable for industrial applications requiring high side drivers.
LTC7003IMSE#PBF
Analog Devices
LTC7003IMSE#PBF by Analog Devices is a MOSFET Gate Driver with 60V max supply voltage, 10V nominal voltage, and 0.07us turn-on/off time. Ideal for automotive applications due to its CMOS technology, it features a small outline package style and dual terminal position for efficient heat dissipation.
MIC4604YMT-TR
Micrel
HALF BRIDGE BASED MOSFET DRIVER; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: SON; Package Shape: RECTANGULAR; Surface Mount: YES;
L6384ED013TR
STMicroelectronics
L6384ED013TR by STMicroelectronics is a MOSFET gate driver with a max supply voltage of 16.6V and nominal voltage of 14.4V. It features an interface IC type of half bridge based MOSFET driver, suitable for applications requiring high side drivers and a turn-off time of 0.3us.
LTC7003EMSE#TRPBF
LTC7003EMSE#TRPBF by Analog Devices is a MOSFET Gate Driver with 16 terminals, operating voltage range of 3.5V to 60V, and turn-on/off time of 0.07us. Ideal for automotive applications due to its small outline package style and wide temperature range from -40°C to 125°C.
ISO5852SQDWQ1
ISO5852SQDWQ1 by Texas Instruments is a MOSFET gate driver with 16 terminals, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage range of 2.25-30V and max output current of 5A. The driver has a turn-on/off time of 0.11us and comes in a small outline package measuring 10.3x7.5mm.
MAX5079EUD+
Maxim Integrated
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
FAN7390AMX1
FAN7390AMX1 by Onsemi is a MOSFET gate driver with a supply voltage range of 10-20V. It features a small outline package, dual terminals, and high side driver capability. Ideal for automotive applications, it has an operating temperature range of -40 to 125°C and supports IGBT/MOSFET drivers with a peak current limit of 4.5A.
LM5109MA/NOPB
LM5109MA/NOPB by Texas Instruments is a MOSFET gate driver with a max supply voltage of 14V and power supplies of 12V. It features high side driver capability, turn-on/off time of 0.056us, and nominal output peak current limit of 1A. Ideal for automotive applications requiring precise control over MOSFET switching in compact designs.
UCC37322DGN
UCC37322DGN by Texas Instruments is a MOSFET gate driver with a max supply voltage of 15V and output current of 9A. It features a small outline package, totem-pole output characteristics, and BICMOS technology. Ideal for commercial applications requiring fast turn-on/off times in a compact design.
SKHI22BH4R
Semikron International
SKHI22BH4R by Semikron International is a MOSFET gate driver with a max supply voltage of 15.6V and built-in protections for transient, over current, and under voltage. It features a turn-on time of 1.15us and interface IC type as half bridge based IGBT driver. Ideal for industrial applications requiring reliable power supplies in the temperature range of -40 to 85°C.
TC4426EOA713
Microchip TC4426EOA713 is a MOSFET gate driver with 18V max supply voltage, 1.5A output peak current limit, and 0.1us turn-on time. Ideal for industrial applications requiring inverted output polarity and high side driver functionality in a small outline package.
LM5106MMX/NOPB
LM5106MMX/NOPB by Texas Instruments is a MOSFET gate driver with 2 channels and a max output current of 1.8A, suitable for automotive applications. It operates on a nominal voltage of 12V and has a temperature range from -40 to 125°C. The package style is small outline, thin profile, shrink pitch, making it ideal for compact designs.
MIC4605-1YM-TR
MIC4605-1YM-TR by Microchip is a MOSFET Gate Driver with 16V max supply voltage, 1A output peak current limit, and 0.075us turn-on/off time. Ideal for automotive applications due to its small outline package style and high side driver feature.
ICL7667MJA/883B
Intersil
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
UCC27323DGN
UCC27323DGN by Texas Instruments is a MOSFET gate driver with 2 functions, operating at supply voltages of 4.5-15V. It features a small outline package style and is suitable for automotive applications due to its wide temperature range (-40 to 125°C) and inverted output polarity. With a max output current of 4A, it offers fast turn-on/off times (0.04/0.05 us) making it ideal for high-performance systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IR2110SPBF
IR2110SPBF by Infineon is a MOSFET gate driver with a max supply voltage of 20V and power supplies of 15V. It features high side driver capability, turn-on time of 0.15us, and turn-off time of 0.125us. Ideal for automotive applications due to its temperature grade and interface as a half bridge based MOSFET driver.
International Rectifier
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
IR2113PBF
IR2113PBF by Infineon Technologies is a MOSFET gate driver with a max supply voltage of 520V and power supplies of 15V. With a turn-on time of 0.15us and turn-off time of 0.125us, it is ideal for automotive applications requiring high side drivers in CMOS technology. The package style is in-line with dual terminals, making it suitable for various automotive electronic systems.
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
IR2104SPBF
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
IR2104SPBF by Infineon is a MOSFET gate driver with a max supply voltage of 20V and high side driver feature. It has a turn-on time of 0.82us, making it suitable for automotive applications due to its temperature grade and small outline package style. With a nominal output peak current limit of 0.36A, this CMOS technology-based driver offers efficient performance in various electronic systems.
IR2110PBF
IR2110PBF by Infineon Technologies is a MOSFET gate driver with a max supply voltage of 20V and high side driver feature. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various applications requiring precise turn-on/off times of 0.15us and 0.125us. With a nominal output peak current limit of 2.5A, this CMOS technology-based driver is ideal for half-bridge based MOSFET driving in automotive electronics.
IR2101STRPBF
IR2101STRPBF by Infineon is a MOSFET gate driver with a max supply voltage of 20V and high side driver feature. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 0.22us, making it ideal for half-bridge based applications. This small outline package (4.9mm x 3.9mm) with dual terminals is suitable for surface mount designs in various electronic systems.
IR2110STR
International Rectifier Hirel Products
IR2110STR by International Rectifier is a MOSFET Gate Driver with 16 terminals, suitable for automotive applications. It operates b/w -40 to 125 °C and has a max supply voltage of 520 V. With a turn-on time of 0.15 us and turn-off time of 0.125 us, it provides efficient control for high side drivers.
IR2104STRPBF
IR2104STRPBF by Infineon is a MOSFET gate driver with 8 terminals, suitable for automotive applications. It operates at temperatures from -40 to 125°C and has a max supply voltage of 620V. With a turn-on time of 0.82us and turn-off time of 0.22us, it provides precise control in high-side driver configurations.
IR2184STRPBF
IR2184STRPBF by Infineon is a MOSFET gate driver with a max supply voltage of 20V, suitable for automotive applications. It features high side driver, turn-on time of 0.9us, and interface IC type as half bridge based MOSFET driver. With small outline package style and CMOS technology, it operates b/w -40 to 125 °C temperature range.
IR21844SPBF
IR21844SPBF by Infineon is a MOSFET gate driver with a max supply voltage of 20V and high side driver feature. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on time of 0.9us, making it suitable for half-bridge based MOSFET driver applications. The package style is small outline (8.65mm x 3.9mm) with dual terminals and matte tin finish, ideal for surface mount designs requiring compact dimensions.
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
IR2104STR
IR2104STR by International Rectifier is a MOSFET gate driver with a max supply voltage of 20V, suitable for automotive applications. It features a high side driver and Schmitt trigger input characteristics, with turn-on time of 0.82us and turn-off time of 0.22us. This small outline package has 8 terminals and operates in temperatures ranging from -40 to 125°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved