Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Peak Off-state Voltage: 800 V; Maximum Operating Temperature: 100 Cel; Additional Features: UL RECOGNIZED; Configuration: SINGLE;
Median Price
$3.742
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Farnell
1+ parts
$3.696
100+ parts
$2.075
1k+ parts
-
10k+ parts
Element14
$3.787
$2.076
Newark
$4.320
$2.490
$2.190
$2.140
Mouser Electronics
$4.370
$2.540
$2.120
RS (Exports)
$2.665
$2.542
Verical
$3.000
Nova Conductors
$1.889
Digiode
$3.116
TME
$3.900
$2.300
$1.990
VNN
Vyrian
Schukat
$2.201
$1.831
Micros
$2.205
$2.171
ACDS - Activité Composants Distribution Service
NAC Semi
Micros sp.j. W. Kędra i J. Lic
$1.676
$1.646
Fibra_Brandt Electronic GMBH
Prism Electronics
LittleDiode
ComSIT Distribution GmbH
Corohmni
$0.172
Modulus Dynamics
$0.288
$0.276
$0.265
Continental Prestige Electronics
$1.851
Argo Parts USA
Ampacity Inc.
$2.270
Semicontronic
$2.213
$2.202
Corphita
$2.952
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
Authorized Procurement Solutions
Assy Fe
Optocoupler Trigger Device Outputs BRT23H attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Infineon Technologies
Additional Features:
Configuration:
Maximum Forward Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
JESD-609 Code:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Peak Off-state Voltage:
Terminal Finish:
BRT23H Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Zowie Technology
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
MOC3033SR2M
MOC3033SR2M by Onsemi is a single optocoupler trigger device with a max on-state voltage of 3V and peak surge current of 1A. It features a triac output optocoupler configuration, suitable for applications requiring high isolation voltage up to 7500V. Ideal for surface mounting, it operates b/w -40°C to 85°C temperatures.
MOC3052
Isocom Components
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: TIN; Additional Features: UL RECOGNIZED; Minimum Peak Off-state Voltage: 600 V; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
MOC3010M
The Onsemi MOC3010M is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high electrical isolation.
MOC3073SR2M
The Onsemi MOC3073SR2M is a single TRIAC output optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 4170V, and is ideal for triggering devices in optoelectronic applications.
MOC3020.S
TRIAC OUTPUT OPTOCOUPLER; Configuration: SINGLE; Nominal Input Trigger Current: 30 mA; Maximum Isolation Voltage: 5300 V; Additional Features: UL APPROVED; No. of Elements: 1;
IL4117-X007
Vishay Intertechnology
IL4117-X007 by Vishay Intertechnology is a single optocoupler with TRIAC output. It has a max forward current of 0.06A, isolation voltage of 5300V, and on-state current of 0.3A. Ideal for applications requiring high voltage and current isolation such as industrial controls and power supplies.
FODM3023R2V
FODM3023R2V by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 °C to 100°C, has an isolation voltage of 3750V, and is ideal for applications requiring optocoupler trigger device outputs in surface mount configurations.
MOC3020
Harris Semiconductor
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .05 A; Nominal Input Trigger Current: 30 mA; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e0;
MOC3042SM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .1 A;
FOD4218V
FOD4218V by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55°C to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high voltage protection.
FOD410S
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 600 V; No. of Elements: 1; Nominal Input Trigger Current: .65 mA; Maximum Forward Current: .03 A;
TLP3083F(LF4,F
Toshiba
Toshiba's TLP3083F(LF4,F is a single TRIAC output optocoupler with 3V max on-state voltage and 1.2A peak surge current. Ideal for applications requiring high isolation voltage of 5000V, such as in surface mount configurations for triggering devices with low input trigger current of 0.005A.
MOC3051SM
The Onsemi MOC3051SM is a single optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 7500V, and is ideal for triggering devices in applications requiring high voltage protection.
EL3063S1(TA)-V
Everlight Electronics
EL3063S1(TA)-V by Everlight Electronics is a single optocoupler trigger device output with a max on-state voltage of 3V. It has a peak surge current of 1A and can operate at temperatures ranging from -55 to 100 °C. This optoelectronic component is commonly used in applications requiring high isolation voltage and control of AC power circuits.
MOC3051TVM
The Onsemi MOC3051TVM is a single TRIAC output optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 7500V, and is ideal for triggering devices in applications requiring high-voltage protection.
MOC3042M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .1 A; Nominal Input Trigger Current: 10 mA; Maximum Reverse Leakage Current: .0001 A;
3046
Nte Electronics 3046 is a SCR output optocoupler with max. forward current of 0.06A and min. peak off-state voltage of 400V. It has a nominal input trigger current of 14mA and max isolation voltage of 3550V, making it ideal for applications requiring high electrical isolation and triggering capabilities in single configuration setups.
MOC3021M
The Onsemi MOC3021M is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high-voltage protection.
IL4108-X007T
Vishay Intertechnology IL4108-X007T is a single optocoupler with 0.06A forward current, 2mA trigger current, and 800V peak off-state voltage. Ideal for triggering devices in applications requiring high isolation voltage up to 5300V, such as industrial control systems and power supplies.
BRT23H-X016
Siemens
TRIGGER OUTPUT OPTOCOUPLER; Minimum Peak Off-state Voltage: 800 V; Nominal Input Trigger Current: 2 mA; Maximum Operating Temperature: 100 Cel; No. of Elements: 1; Maximum On State Current: .3 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BRT22H-X007T
Vishay Intertechnology's BRT22H-X007T is a single TRIAC output optocoupler with 0.06A max forward current, ideal for triggering devices. With 600V min peak off-state voltage and 5300V max isolation voltage, it operates b/w -40°C to 100°C. Suitable for applications requiring precise input trigger current of 2mA and 0.3A max on-state current.
Vishay Semiconductors
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5300 V; No. of Elements: 1; JESD-609 Code: e3;
Infineon Technologies
TRIGGER OUTPUT OPTOCOUPLER; Nominal Input Trigger Current: 2 mA; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Maximum On State Current: .3 A;
Vishay Intertechnology's BRT23H-X016 is a single optocoupler trigger device with a max forward current of 0.02A and isolation voltage of 5300V. It operates b/w -40°C to 100°C, making it suitable for applications requiring high voltage protection and signal isolation in harsh environments.
BRT23H-X001
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; No. of Elements: 1; Maximum Isolation Voltage: 5300 V;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; JESD-609 Code: e3; Minimum Peak Off-state Voltage: 800 V; Configuration: SINGLE;
TRIGGER OUTPUT OPTOCOUPLER; No. of Elements: 1; Configuration: SINGLE; Nominal Input Trigger Current: 2 mA; Minimum Operating Temperature: -40 Cel; Maximum On State Current: .3 A;
TRIGGER OUTPUT OPTOCOUPLER; Maximum On State Current: .3 A; Maximum Isolation Voltage: 5300 V; Nominal Input Trigger Current: 2 mA; Maximum Forward Current: .02 A; No. of Elements: 1;
BRT23H-X018T
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Maximum Forward Current: .06 A; Minimum Operating Temperature: -40 Cel; Additional Features: HIGH SENSITIVITY, UL RECOGNIZED; Nominal Input Trigger Current: 2 mA; No. of Elements: 1;
BRT23H
The Vishay Intertechnology BRT23H is a single optocoupler trigger device with a max forward current of 0.02A and a nominal input trigger current of 2mA. It features a triac output optocoupler with zero cross voltage for applications requiring high isolation voltages up to 5300V, making it suitable for use in temperature-sensitive environments with operating temperatures ranging from -40°C to 100°C.
Telefunken Microelectronics
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 5300 V; Maximum Reverse Leakage Current: .00001 A; Maximum On State Current: .3 A;
Vishay Telefunken
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Maximum On State Current: .3 A; JESD-609 Code: e3; Minimum Peak Off-state Voltage: 800 V;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; No. of Elements: 1; Minimum Operating Temperature: -40 Cel; Nominal Input Trigger Current: 2 mA; Configuration: SINGLE; Maximum Isolation Voltage: 5300 V;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
BRT23H-X007
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .02 A; Configuration: SINGLE; Nominal Input Trigger Current: 2 mA; Maximum On State Current: .3 A;
TRIGGER OUTPUT OPTOCOUPLER; Configuration: SINGLE; Maximum Isolation Voltage: 5300 V; No. of Elements: 1; Maximum On State Current: .3 A; Maximum Forward Current: .02 A;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3; Additional Features: UL RECOGNIZED; Minimum Peak Off-state Voltage: 800 V;
TRIGGER OUTPUT OPTOCOUPLER; Maximum On State Current: .3 A; No. of Elements: 1; Minimum Peak Off-state Voltage: 800 V; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .02 A;
BRT23H-X017
TRIGGER OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .02 A; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e3; Maximum Isolation Voltage: 5300 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved