Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
1EDI30J12CPXUMA1 by Infineon is a MOSFET Gate Driver with 19 terminals, operating at power supplies of 5V to -25V. It features a small outline package style and Gull Wing terminal form. Ideal for applications requiring BUFFER OR INVERTER BASED MOSFET DRIVER interface IC type.
Median Price
$2.298
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$2.170
1k+ parts
$1.940
10k+ parts
$1.820
Verical
$2.425
$2.275
Digiode
$2.290
Vyrian
VNN
Greenchips
Nova Conductors
Ampacity Inc.
$2.050
Corphita
$2.169
Component Stockers USA
$2.460
$2.320
$2.090
Corohmni
$4.519
Aztec Data Supply Inc.
$11.133
Modulus Dynamics
$14.207
$13.639
$13.070
Continental Prestige Electronics
Argo Parts USA
Aranea Global
PLASTIC/EPOXY is a lightweight and durable material, making the product suitable for various applications without adding extra weight.
Surface mount capability allows for easy and efficient installation on circuit boards, saving time and effort during assembly.
Wide range of power supply voltage options makes this MOSFET gate driver versatile and compatible with different systems.
Having 19 terminals provides flexibility in connection options and allows for more intricate circuit designs.
TIN terminal finish offers good conductivity and corrosion resistance, ensuring reliable connections for optimal performance.
Dual terminal positions offer more connection possibilities and make the product adaptable to various circuit layouts.
Gull wing terminal form facilitates easy soldering onto the circuit board, enhancing the product's assembly process.
Having a small terminal pitch allows for compact design and efficient use of PCB space, making the product suitable for space-constrained applications.
MSL level 3 indicates that the product can withstand limited exposure to moisture, ensuring reliability in various environmental conditions.
The buffer or inverter based MOSFET driver interface IC type provides flexibility in signal processing and driving capabilities for enhanced performance.
MOSFET Gate Drivers 1EDI30J12CPXUMA1 attributes and parameters. Explore more MOSFET Gate Drivers devices from Infineon Technologies
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
1EDI30J12CPXUMA1 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Mult Dev Label Chgs 11/Jan/2018
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Silicon Transistor
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
LM5109BQNGTRQ1
Texas Instruments
LM5109BQNGTRQ1 by Texas Instruments is a MOSFET gate driver with 2 channels, suitable for automotive applications. It operates b/w -40 to 125 °C and has a max supply voltage of 14 V. With a turn-on/off time of 0.056 us, it features a small outline package style and very thin profile, making it ideal for high side driver applications.
UCC27611DRVT
UCC27611DRVT by Texas Instruments is a MOSFET gate driver with 6A output current, 12V nominal voltage, and -40 to 140°C operating temperature range. It is designed for automotive applications, featuring a small outline package with surface mount capability and dual terminal position for efficient heat dissipation.
TC4426EOA
Teledyne Components
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Microchip Technology
TC4426EOA by Microchip Technology is a MOSFET gate driver with 2 functions, operating at supply voltages from 4.5V to 18V. It features a totem-pole output and Schmitt trigger input, suitable for industrial applications requiring fast turn-on/off times of 0.1us/0.08us and a peak current limit of 1.5A.
6EDL04N02PRXUMA1
Infineon Technologies
6EDL04N02PRXUMA1 by Infineon is a MOSFET Gate Driver with 15V power supplies, 17.5V max supply voltage, and 0.8us turn-on/off time. Ideal for industrial applications, it features a small outline package with dual terminals and operates b/w -40 to 95°C.
TC4426AEOA713
TC4426AEOA713 by Microchip Technology is a MOSFET gate driver with 2 functions, operating at supply voltages from 4.5V to 18V. It features a totem-pole output and Schmitt trigger input characteristics, making it ideal for industrial applications requiring high side drivers with inverted output polarity. The compact rectangular package style and dual terminal position offer versatility in various electronic designs.
1EDI20N12AFXUMA1
1EDI20N12AFXUMA1 by Infineon Technologies is a MOSFET Gate Driver with 8 terminals, operating voltage range of 10-35V, and turn-on/off times of 0.137/0.143 us. Widely used in automotive applications due to its small outline package style and temperature grade.
LTC7000MPMSE#TRPBF
Linear Technology
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR; Maximum Seated Height: 1.1 mm;
ICL7667MJA/883B
General Electric Solid State
MOSFET Drivers; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2EDL23N06PJ
2EDL23N06PJ by Infineon Technologies is a MOSFET gate driver with a max supply voltage of 25V and built-in protections for over current and under voltage. It has a turn-on time of 0.61 us and is ideal for industrial applications requiring high side drivers in small outline packages.
CPC1560GSTR
Littelfuse
BUFFER OR INVERTER BASED MOSFET DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Peak Reflow Temperature (C): 250; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN;
IXDN609SIA
Ixys Integrated Circuits Division
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TC4468EPD
AND GATE BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Shape: RECTANGULAR; Input Characteristics: SCHMITT TRIGGER;
UCC5390ECDWVR
UCC5390ECDWVR by Texas Instruments is a MOSFET gate driver with a max supply voltage of 33V and built-in transient and under voltage protections. It operates in automotive-grade temperatures, has a turn-on/off time of 0.1us, and can handle a max output current of 17A. Ideal for driving IGBT/MOSFETs in automotive applications.
LT1158ISW#TRPBF
Analog Devices
LT1158ISW#TRPBF by Analog Devices is a MOSFET gate driver with a supply voltage range of 5-30V and operating temperature from -40 to 85°C. It features a half bridge based interface IC, 0.55us turn-off time, and is ideal for industrial applications requiring high side drivers in compact spaces.
L6392D
L6392D by STMicroelectronics is a MOSFET gate driver with a max supply voltage of 20V and power supplies up to 15V. It features a small outline package style, high side driver capability, and turn-on/off times of 0.2us. Ideal for automotive applications due to its BCD technology and operating temperature range from -40°C to 125°C.
FAN3100CMPX
FAN3100CMPX by Onsemi is a MOSFET Gate Driver with 18V max supply voltage, 12V power supplies, and -40 to 125°C operating temperature range. It features transient protection and is ideal for automotive applications requiring source/sink output current flow control.
LM5109ASD/NOPB
LM5109ASD/NOPB by Texas Instruments is a MOSFET gate driver with a max supply voltage of 14V and power supplies of 12V. It has a small outline package style, suitable for automotive applications. With high side driver capability and dual terminal position, it offers true output polarity and fast turn-on/off times of 0.056 us.
FAN7382MX
Fairchild Semiconductor
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
UCC21520QDWQ1
UCC21520QDWQ1 by Texas Instruments is a MOSFET gate driver with 2 channels, 6A max output current, and built-in under voltage protection. Ideal for automotive applications, it operates b/w -40 to 125°C, has a supply voltage range of 3-25V, and features a half bridge based IGBT/MOSFET driver interface IC type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1EDI60N12AFXUMA1
1EDI60N12AFXUMA1 by Infineon is a MOSFET gate driver with 8 terminals, operating voltage range of 3.1V to 17V, and turn-on/off times of 0.142/0.15 us. Ideal for automotive applications due to its small outline package style and dual terminal position.
1EDI40I12AFXUMA1
BUFFER OR INVERTER BASED IGBT DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1EDI60I12AFXUMA1
1EDI60I12AFXUMA1 by Infineon Technologies is a MOSFET Gate Driver with 8 terminals, operating at -40 to 125 °C. It has built-in protections for over current, thermal, and under voltage. With a max supply voltage of 35 V, it is ideal for automotive applications requiring a true output polarity and a nominal output peak current limit of 10 A.
1EDI05I12AFXUMA1
1EDI05I12AFXUMA1 by Infineon Technologies is a MOSFET Gate Driver with 17V max supply voltage, 35V overvoltage protection, and 1.3A output current limit. Ideal for automotive applications due to its small outline package and thermal protection features.
1EDI20N12AF
1EDI20N12AF by Infineon Technologies is a MOSFET Gate Driver with 8 terminals, operating at -40 to 125 °C. It has a turn-on time of 0.137 us and turn-off time of 0.143 us. Ideal for automotive applications due to its small outline package style and dual terminal position.
1EDI60N12AF
1EDI60N12AF by Infineon Technologies is a MOSFET gate driver with 8 terminals, suitable for automotive applications. It operates b/w -40 to 125 °C and has a turn-on time of 0.142 us. With a max supply voltage of 17 V, it offers a nominal output peak current limit of 10 A.
1EDI30I12MFXUMA1
1EDI05I12AHXUMA1
1EDI05I12AF
1EDI20I12MFXUMA1
1EDI20I12MFXUMA1 by Infineon Technologies is a MOSFET Gate Driver with 17V max supply voltage, 18V over current protection, and 125°C max operating temperature. Ideal for automotive applications due to its small outline package style and gull wing terminal form. Fast turn-on/off times of 0.33 us make it suitable for buffer or inverter based IGBT driver interfaces.
1EDI20I12AFXUMA1
1EDI60H12AHXUMA1
1EDI10I12MHXUMA1
1EDI20I12AHXUMA1
1EDI20I12MH
1EDI2004ASXUMA1
BUFFER OR INVERTER BASED IGBT DRIVER; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: SSOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
1EDI20I12MHXUMA1
1EDI20I12SV
BUFFER OR INVERTER BASED IGBT DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: SSOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved