Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
16_SMA-50-2-53/119_NE by Huber+suhner Ag is a SSMA Connector with gold (Au) termination, suitable for RF applications up to 18 GHz. Featuring a threaded coupling type and durable brass shell, it has a characteristic impedance of 50 ohm. Ideal for commercial use, this connector offers reliable performance in temperatures ranging from -65 to 165 °C.
Median Price
$15.300
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Farnell
1+ parts
$16.390
100+ parts
$9.710
1k+ parts
$9.320
10k+ parts
-
Element14
$26.440
$19.110
$16.780
Master Electronics
$14.210
$13.290
Verical
$12.860
Microwave Components, LLC
$11.620
$8.300
Nova Conductors
$14.450
Vyrian
VNN
IBS Electronics
$18.485
$16.802
Aztec Data Supply Inc.
$2.130
AZTECH Wire
$9.178
Continental Prestige Electronics
$12.350
$12.103
Netroflash
$13.727
$13.438
Argo Parts USA
Lucentia Tech
Robosynatics
Gold (Au) - with Nickel (Ni) barrier - Provides excellent conductivity and corrosion resistance, making it a reliable choice.
0.65 inch - Compact design allows for easy installation in tight spaces.
YES - Meets military standards for quality and reliability, ensuring high performance in demanding environments.
THREADED - Allows for secure connections that are resistant to vibration and shock.
PERFLUOROALKOXY/POLYTETRAFLUORO ETHYLENE - Offers superior electrical insulation and durability for long-lasting use.
165 - Can withstand high temperatures without compromising performance.
YES - Complies with international standards for safety and compatibility.
65 °C - Suitable for use in extreme cold environments without losing functionality.
GOLD - Provides enhanced conductivity and corrosion resistance for reliable signal transmission.
RF SMA CONNECTOR - Designed for high-frequency applications with low signal loss and interference.
GOLD OVER NICKEL - Ensures a secure and stable connection for optimal performance.
500 Cycles - Can withstand repeated mating and unmating cycles without degradation in performance.
CABLE - Easy to install on various cable types for versatility in connectivity options.
50 ohm - Matches the impedance of common RF cables for efficient signal transmission.
BRASS - Provides durability and strength for long-lasting performance.
SOLDER - Allows for a secure and reliable connection that is easy to install.
MALE - Compatible with a wide range of female connectors for versatile connectivity options.
PLUG - Easy to connect and disconnect for convenience in use.
RIGHT ANGLE - Allows for installation in tight spaces or at angles for flexible connectivity options.
COAX - Ensures high-quality signal transmission with minimal interference.
LOCKING - Provides a secure and stable connection that prevents accidental disconnection.
18 GHz - Suitable for high-frequency applications that require reliable signal transmission.
COMMERCIAL - Meets industry standards for quality and reliability, ensuring consistent performance over time.
SSMA Connectors 16_SMA-50-2-53/119_NE attributes and parameters. Explore more SSMA Connectors devices from Huber+suhner Ag
Additional Features:
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
16_SMA-50-2-53/119_NE Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
We offer our customers around the globe outstanding products and services for their electrical and optical connectivity needs. We focus on the three main markets of industrial, communication and transportation which are addressed with applications from the three technologies radio frequency, fiber optics and low frequency. HUBER+SUHNER products deliver high performance, quality, reliability and a long service life – even under the toughest of conditions. A global production network, combined with subsidiaries and agencies in over 80 countries, puts HUBER+SUHNER close to its customers
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Hy Electronic
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Sangdest Microelectronics (Nanjing)
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
R125325000
Radiall S A
R125325000 by Radiall S A is an RF SMA Connector with a 50 ohm impedance and 0.02 dB insertion loss. Featuring gold termination contacts, it has a VSWR of 1.05 and operates up to 18 GHz. Ideal for panel mount applications, this threaded connector is commonly used in high-frequency communication systems.
901-101-15
Amphenol
Amphenol 901-101-15 is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.11 dB. It features gold termination contact finish, threaded coupling type, and PTFE insulator material. Ideal for applications requiring durability up to 500 cycles, operating temperature range from -65 to 165 °C, and max frequency of 12.4 GHz in commercial settings.
142-0701-411
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Manufacturer Series: SMA; JESD-609 Code: e4;
132117RP
The Amphenol 132117RP is an RF SMA connector with a gold shell finish and POLYTETRAFLUOROETHYLENE insulator. It has a body depth of 0.449" and is designed for RG-174/U cable termination in commercial applications, offering a reliable connection with a straight mounting style.
M39012/60-3001
Automatic Connector
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Panel Mount: YES; IEC Conformity: NO;
11_SMA-50-2-65/119_NE
Huber+suhner Ag
11_SMA-50-2-65/119_NE by Huber+suhner Ag is a RF SMA connector with gold finish, suitable for commercial applications. With a characteristic impedance of 50 ohm and max operating frequency of 18 GHz, it offers durability up to 500 cycles. This threaded coupling type connector has a temperature range from -65°C to 165°C, making it ideal for various cable mounting applications.
M39012/83B3004
TE Connectivity
TE Connectivity's M39012/83B3004 SSMA Connector features 0.13 dB insertion loss, 1.23 VSWR, and 18 GHz max operating frequency. Ideal for RF applications, it has threaded coupling, PTFE insulator, and crimp termination for 50 ohm impedance. Suitable for cable and panel mounting with female contact gender.
142-0335-401
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (30); IEC Conformity: NO; Coupling Type: THREADED;
M39012/56-3128
Sv Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-39012; Contact Gender: MALE; No. of Connectors: ONE; Mains Connector Rating: 115/230VAC;
142-0701-501
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Minimum Operating Temperature: -65 Cel;
142-1701-871
Bel Fuse
RF SMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
R125.052.002
The Radiall S A R125.052.002 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.16 dB Insertion Loss, and 750VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 27 GHz, this connector has a gold finish, PTFE insulator material, and is designed for durability with 500 cycles of use.
142-0801-811
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
1051661-1
TE Connectivity's 1051661-1 SSMA Connector features a body length of 1.5", insertion loss of 0.06 dB, and insulation resistance of 5000000000 ohm. Ideal for RF applications with RG cables, this threaded connector has a max operating frequency of 18 GHz and operates in temperatures ranging from -65 to 165 °C.
1-1478908-0
TE Connectivity 1-1478908-0 is an RF SMA connector with threaded coupling, suitable for RG-174A/U, RG-188A/U, and RG-316/U cables. Featuring a 50 ohm impedance, it has a stainless steel shell with gold finish and operates b/w -65 to 165°C. Ideal for applications requiring a male plug coax contact at frequencies up to 26 GHz.
142-0801-801
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Termination Contact Finish: Gold (Au); Characteristic Impedance: 50 ohm;
1051788-1
TE Connectivity's 1051788-1 SSMA Connector features a body length of 1.3" and gold termination contact finish. With an insertion loss of 0.21 dB, it is ideal for RF applications up to 12.4 GHz. The connector has a threaded coupling type and operates b/w -65°C to 165°C, suitable for cables like RG 400 and RG 223.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: SMA; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
R124.172.123W
R124.172.123W by Radiall S A is an RF SMA CONNECTOR with 50 ohm impedance, 750VAC dielectric voltage, and 12.4 GHz operating frequency. It is used in commercial applications requiring high durability and a temperature range of -65 to 165 °C, suitable for RG-316 cables with POLYTETRAFLUOROETHYLENE insulator material.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
16_SMA-50-3-3/111_NE
RF SMA CONNECTOR; Option: WITH CABLE ASSEMBLY; Reliability: COMMERCIAL; Contact Gender: MALE; Body or Shell Style: PLUG; Contact Style: COAX;
16_SMA-50-2-112/133_NE
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Panel Mount: NO; Voltage Standing Wave Ratio: 1.11;
16_SMA-50-3-145/133_NE
16_SMA-50-3-145/133_NE by Huber+suhner Ag is a threaded RF SMA connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 18 GHz and is suitable for use in commercial applications.
16_SMA-50-2-105/111_NE
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; DIN Conformance: NO; Mating Contact Finish: GOLD OVER NICKEL;
16_SMA-50-3-105/111_NE
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Style: COAX; Shell Material: BERYLLIUM COPPER;
16_SMA-50-2-103/111_NH
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; IEC Conformity: YES; Mounting Option-1: LOCKING;
16_SMA-50-2-53/119_NH
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Contact Material: NOT SPECIFIED;
16_SMA-50-2-110/133_NE
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mounting Style: RIGHT ANGLE; Filter Feature: NO;
16SMA-50-2-100/199NH
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Type: CABLE; Characteristic Impedance: 50 ohm;
16_SMA-50-2-106/111_NE
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body or Shell Style: PLUG; Minimum Operating Temperature: -65 Cel;
16_SMA-50-2-43/133_NE
RF SMA CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Mating Contact Finish: GOLD OVER NICKEL; Body or Shell Style: PLUG; Minimum Operating Temperature: -65 Cel;
16_SMA-50-2-103/111_NE
16_SMA-50-2-103/111_NE by Huber+suhner Ag is a SSMA Connector with gold finish, threaded coupling, and 50 ohm impedance. Ideal for RF applications up to 18 GHz, it features a durable brass shell, solder termination, and operates b/w -65°C to 165°C.
16_SMA-50-2-141/133_NH
16_SMA-50-2-141/133_NH by Huber+suhner Ag is a threaded RF SMA connector with gold-over-nickel mating contact finish. It has a characteristic impedance of 50 ohm, operates b/w -65 to 165 °C, and can handle frequencies up to 18 GHz. Ideal for commercial applications requiring durable, high-frequency connections.
16_SMA-50-1-1/111_NE
16_SMA-50-1-1/111_NE by Huber+suhner Ag is an RF SMA connector with a characteristic impedance of 50 ohm, suitable for RG-196A/U cables. It features gold-over-nickel mating contact finish, brass shell material, and can operate b/w -65 to 165 °C. Ideal for commercial applications requiring durability with 500 cycles and a max frequency of 18 GHz.
16_SMA-50-3-43/133_NE
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; MIL Conformity: YES; Mating Contact Finish: GOLD OVER NICKEL;
16_SMA-50-2-111/133_NE
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Total No. of Contacts: 1;
16_SMA-50-2-112/133_NP
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Total No. of Contacts: 1; Termination Type: CRIMP SOLDER;
16_SMA-50-2-141/133_NE
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body or Shell Style: PLUG; Shell Material: BRASS;
16_SMA-50-2-105/111_NH
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Maximum Operating Frequency: 18 GHz; Body Length: .25 inch;
16_SMA-50-2-145/133_NE
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Panel Mount: NO; Mounting Style: RIGHT ANGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved