Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Honeywell Sensing And Control GLDB03C is a SPDT snap action/limit switch with IP66/IP67 sealing. It has a max operating temperature of 85°C and can handle up to 10A@600VAC. With a top roller plunger actuator, it's ideal for applications requiring momentary switch action in harsh environments.
Median Price
$676.870
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Verical
Powell Electronics
Nova Conductors
$72.113
Electro Sonic
$121.430
$89.160
$88.490
Vyrian
IBS Electronics
TME
Corohmni
$1.545
Aztec Data Supply Inc.
$1.841
AZTECH Wire
$14.562
Continental Prestige Electronics
$70.670
Netroflash
Ampacity Inc.
$80.600
Argo Parts USA
Provides protection against dust, water, and other environmental factors, ensuring durability and reliability in various conditions
Allows for control of multiple circuits with a single switch, offering versatility in application
Can withstand high temperatures, making it suitable for use in a wide range of environments
Handles high AC currents, making it suitable for industrial applications
Capable of functioning in low temperatures, increasing its usability in various settings
Provides sufficient movement for effective switching, ensuring reliable operation
The top roller plunger design offers precise actuation and control, enhancing performance
Suitable for controlling DC circuits with moderate voltage levels
Combines the quick response of snap acting with the accuracy of a limit switch, offering optimal performance
Capable of handling high AC voltage and current ratings, making it suitable for heavy-duty applications
Provides sufficient force for actuation, ensuring reliable switching operation
Can control DC circuits with moderate voltage and current levels, expanding its usability
Handles high DC currents, making it suitable for a wide range of DC applications
The momentary switch action is ideal for applications where precise control and timing are required
Capable of switching high AC voltages, expanding its compatibility with various systems
Limits the amount of pre-travel before actuation, ensuring quick and precise switching
Snap Action & Limit Switches GLDB03C attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Actuator Travel (mm):
Type (Actuator):
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
GLDB03C Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
BAV99
National Semiconductor
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Rectron
MS24547-1
Defense Logistics Agency
MS24547-1 by Defense Logistics Agency is a SPDT snap acting/limit switch with 25000 cycles electrical life. It has a body width of 5.33in, corrosion and moisture proof sealing, and operates b/w -55 to 85°C. Ideal for panel mounting applications, it offers a max AC contact current of 7A@115VAC and DC contact current of 7A@28VDC.
GLCB01A4J
Honeywell Sensing And Control
The Honeywell Sensing And Control GLCB01A4J is an IP67 sealed SPDT snap action/limit switch with a max operating temperature of 85°C. It has a max AC contact current of 10A and a DC contact voltage of 250V, making it suitable for industrial applications requiring reliable switching in harsh environments. The side rotary actuator design and momentary switch action provide precise control with a max operating force of 4.89N.
LSA2B-1A
LSA2B-1A by Honeywell is a DPDT snap action/limit switch with EPOXY TERMINAL SEALING (IP65, IP66, IP67). It operates b/w -12°C to 121°C and supports 10A@600VAC AC max rating. Ideal for panel mounting applications requiring a side rotary actuator.
9007MS05S0300
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
F82A-B120
The Cherry
The Cherry F82A-B120 is a SNAP ACTING/LIMIT SWITCH with DPST switch function. It features THERMOPLASTIC housing, BRASS terminals, and SILVER plating. Ideal for applications requiring 16A@250VAC AC contact current, -25 to 85 °C operating temperature range, and 7.874mm actuator travel.
D2HW-C281M
Omron
Omron's D2HW-C281M snap action switch has an electrical life of 100k cycles, IP67 sealing, and SPDT switch function. With a body width of 5.3in and actuator travel of 2.8mm, it is ideal for panel mounting applications requiring momentary switch action at temperatures ranging from -40 to 85°C.
ESE23J001
Panasonic
BZ-2RL2T04
Honeywell Sensing And Control's BZ-2RL2T04 is a SPDT snap acting/limit switch with 5.48mm actuator travel and 1.39N max operating force. Its corrosion-proof sealing makes it ideal for panel mount applications requiring momentary switch action in industrial settings.
DT-2R-A7
The Honeywell Sensing And Control DT-2R-A7 is a DPDT snap action/limit switch with 10A@250VAC AC max rating. With a body width of 17.45 inch and height of 31.24 mm, it offers momentary switch action and screw termination type for panel mounting applications. Its actuator travel is 2.04mm, making it suitable for various industrial control systems requiring precise switching capabilities.
LSA1A-1B
LSA1A-1B by Honeywell is a SPDT snap action/limit switch with -12 to 121°C operating range. Featuring side rotary actuator, it has 250V DC and 600V AC contact voltage. Ideal for panel mounting applications, this switch offers momentary switch action with wire termination.
D2F-01FL3-D3
Omron's D2F-01FL3-D3 snap action switch has an electrical life of 30k cycles, SPDT switch function, and IP40 sealing. Ideal for panel mounting applications, it operates b/w -25°C to 65°C with a max DC contact voltage of 30V and current rating of 0.1A@30VDC.
LSA1A-4M
The Honeywell Sensing And Control LSA1A-4M is a SPDT snap action/limit switch with side rotary actuator. It has a max operating temperature of 121°C and min of -12°C. Suitable for panel mounting, it offers momentary switch action with max contact voltages of 250V DC and 600V AC.
V-15G4-1C25-K
Omron V-15G4-1C25-K is a SPDT snap action/limit switch with 100000 cycles electrical life. It has IP40 sealing, 15A@250VAC AC max rating, and -25 to 80°C operating temperature range. Ideal for panel mounting applications requiring momentary switch action.
GLDC01D
The Honeywell Sensing And Control GLDC01D is a 30mm snap action/limit switch with SPDT function, IP66 sealing, and roller arm actuator. It has a max AC contact current of 6A@120VAC and DC contact current of 0.55A@125VDC. Ideal for panel mounting applications requiring momentary switch action in temperatures ranging from -25°C to 85°C.
D5B-1011
Omron's D5B-1011 snap action switch has IP67 sealing, 5000000 cycle electrical life, and 1.3mm actuator travel. Ideal for panel mounting applications with a max operating force of 0.98N and momentary switch action.
D2VW-5L1-1MS
Omron's D2VW-5L1-1MS snap action switch has an electrical life of 100k cycles, sealing rating of IP67, and SPDT switch function. With a body width of 10.3in and max operating temperature of 90°C, it is ideal for panel mounting applications requiring a reliable momentary switch with a max AC contact current of 5A@250VAC.
11SM4601-H4
11SM4601-H4 by Honeywell is a SPDT snap action/limit switch with 6.35" body width, 0.63mm actuator travel, and 0.97N max operating force. Ideal for panel mounting applications requiring momentary switch action in AC/DC circuits up to 250V/5A.
BZ-RW8435-A2
Honeywell Sensing And Control's BZ-RW8435-A2 is a SPDT snap action/limit switch with 10A@480VAC AC contact current rating. With a body width of 17.45 inch, it features a max operating force of 0.07 N and actuator travel of 12.32 mm. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
111SM1-T2
111SM1-T2 by Honeywell is a SPDT snap action/limit switch with 5A@250VAC rating. Featuring a straight lever actuator, it has an operating force of 1.9599N and an actuator travel of 5.588mm. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
V-10G3-1C25-K
Omron V-10G3-1C25-K is a SPDT snap action/limit switch with 300000 cycles electrical life. It has a body width of 10.3in, sealing rating of IP40, and operates b/w -25 to 80°C. Ideal for panel mounting applications requiring momentary switch action with max AC contact voltage of 250VAC and current of 10A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GLDB01A2A
GLDB01A2A by Honeywell Sensing And Control is a SPDT snap action/limit switch with IP66/IP67 sealing. It has a max operating temperature of 85°C and can handle up to 10A@600VAC. Ideal for applications requiring side rotary actuation, it offers reliable performance in harsh environments.
GLDB01A1B
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): SIDE ROTARY; Maximum Operating Force: 4.89 N; Maximum AC Contact Current: 10 A; DC Maximum Rating R Load (Contact): 10A@250VDC;
GLDB01A4J
The Honeywell Sensing And Control GLDB01A4J is a SPDT snap action/limit switch with IP66/IP67 sealing. It has a max operating temperature of 85°C and can handle up to 10A@600VAC for AC contact current. Ideal for applications requiring side rotary actuation, such as industrial machinery and automation systems.
GLDB01B
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): TOP PLUNGER; AC Maximum Rating R Load (Contact): 10A@600VAC; Maximum DC Contact Voltage: 250 V; Minimum Operating Temperature: -40 Cel;
GLDB07C
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): TOP ROLLER PLUNGER; AC Maximum Rating R Load (Contact): .1A@50VAC; Maximum Operating Temperature: 85 Cel; Sealing: IP66; IP67;
GLDB03A1B
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): SIDE ROTARY; Maximum DC Contact Voltage: 250 V; Maximum Operating Temperature: 85 Cel; Maximum DC Contact Current: 10 A;
GLDB03A5A
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): SIDE ROTARY; Switch Action: MOMENTARY; AC Maximum Rating R Load (Contact): 10A@600VAC; Sealing: IP66; IP67;
GLDB03A5B
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): SIDE ROTARY; Maximum AC Contact Voltage: 600 V; Maximum Operating Force: 4.89 N; DC Maximum Rating R Load (Contact): 10A@250VDC;
GLDB04A1A
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): SIDE ROTARY; Maximum DC Contact Current: 10 A; Maximum AC Contact Current: 10 A; Maximum AC Contact Voltage: 300 V;
GLDB04A2A
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): SIDE ROTARY; Switch Action: MOMENTARY; Maximum DC Contact Voltage: 250 V; Maximum Operating Temperature: 85 Cel;
GLDB04A2B
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): SIDE ROTARY; Switch Action: MOMENTARY; AC Maximum Rating R Load (Contact): 10A@300VAC; Sealing: IP66; IP67;
GLDB04A5A
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): SIDE ROTARY; Switch Action: MOMENTARY; DC Maximum Rating R Load (Contact): 10A@250VDC; Maximum AC Contact Voltage: 300 V;
GLDB04A5B
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): SIDE ROTARY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Maximum DC Contact Current: 10 A;
GLDB04A9A
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): SIDE ROTARY; Maximum DC Contact Current: 10 A; Maximum AC Contact Voltage: 300 V; Switch Action: MOMENTARY;
GLDB01C
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): TOP ROLLER PLUNGER; Maximum Pre Travel: 3 mm; DC Maximum Rating R Load (Contact): 10A@250VDC; Actuator Travel (mm): 6;
GLDB01D
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): TOP ROLLER ARM; Maximum DC Contact Current: 10 A; Switch Action: MOMENTARY; Maximum Pre Travel: 3.45 mm;
GLDB03B
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): TOP PLUNGER; DC Maximum Rating R Load (Contact): 10A@250VDC; Maximum DC Contact Voltage: 250 V; Maximum Pre Travel: 3 mm;
GLDB03D
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): TOP ROLLER ARM; AC Maximum Rating R Load (Contact): 10A@600VAC; Maximum DC Contact Voltage: 250 V; Minimum Operating Temperature: -40 Cel;
GLDB04C
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): TOP ROLLER PLUNGER; DC Maximum Rating R Load (Contact): 10A@250VDC; Minimum Operating Temperature: -40 Cel; Maximum Operating Force: 16 N;
GLDB04D
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): TOP ROLLER ARM; Switch Action: MOMENTARY; Maximum Operating Force: 11 N; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved