Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DIVERSITY SWITCH; Terminal Finish: TUNGSTEN NICKEL GOLD; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 20000 MHz; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel;
Median Price
$174.060
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$136.000
100+ parts
-
1k+ parts
10k+ parts
Rochester
$148.870
$139.930
$126.540
Farnell
$162.250
$129.580
Newark
$165.810
$134.210
Mouser Electronics
$182.310
$153.710
DigiKey
$210.390
$171.913
Analog Devices Inc
$212.450
$173.598
$106.480
Element14
$259.930
$214.680
Verical
Digiode
$129.200
Nova Conductors
$153.120
Vyrian
Chip Stock
Cyclops Electronics Ltd
Parana Technologies
$1.019
$0.948
IDEA Electronic Components Group
$1.096
$1.041
Corohmni
$1.308
DigiPath Technology Company
$1.710
$1.641
Aztec Data Supply Inc.
$2.888
Semicontronic
$115.600
$112.710
$112.132
Corphita
$122.400
Continental Prestige Electronics
$133.440
$122.230
Netroflash
Lixinc
A-Z Elektronik GmbH
RC Electronics
$134.740
$122.260
$117.950
Argo Parts USA
Perfect Parts
RF/Microwave Switches HMC641ALC4 attributes and parameters. Explore more RF/Microwave Switches devices from Hittite Microwave
Additional Features:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Bytesonic Electronics
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
Continental Device India
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Weitronic Enterprise
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
General Semiconductor
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
S126
L-3 Narda-miteq
SPDT;
HMC253LC4TR
Hittite Microwave
SP8T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; No. of Functions: 1;
NJG1681MD7-TE1
New Japan Radio
HMC270MS8GETR
SPDT; Terminal Finish: Matte Tin (Sn); Construction: COMPONENT; Maximum Insertion Loss: 2.4 dB; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 23.98 dBm;
TGS8250-SCC
Texas Instruments
TGS8250-SCC by Texas Instruments is a GAAS SPDT RF switch with 30 dBm CW power handling, VSWR of 1.5, and frequency range up to 18 GHz. Ideal for reflective port termination applications in RF/Microwave systems, operating b/w 0°C to 70°C.
MASW-002100-11910W
TE Connectivity
MASW-002100-11910W by TE Connectivity is an RF/Microwave SPDT switch with max freq of 20 GHz. It offers low insertion loss of 1.2 dB and high isolation of 34 dB. Ideal for applications requiring reliable switching in temperature range from -65°C to 125°C.
HMC547LP3RTR
Analog Devices
Analog Devices' HMC547LP3RTR is a SPDT RF switch with 2.5 dB max insertion loss and 33 dB min isolation. It operates up to 20 GHz, has a compression point of 23 dBm, and is ideal for high-frequency applications in the -40°C to 85°C temperature range.
HMC221BE
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TSOP6,.11,37;
AS213-92LF
Skyworks Solutions
AS213-92LF by Skyworks Solutions is a RF/Microwave Switch with max input power of 33.01 dBm and max VSWR of 1.4. It operates in a frequency range of 100 MHz to 3000 MHz and is commonly used as a diversity switch in various applications.
UPG2158T5K-E2-A
Renesas Electronics
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SOLCC6,.04,14;
HMC183QS24E
HMC183QS24E by Analog Devices is a RF/Microwave Switch with 29.03 dBm CW power, 1.8 dB max insertion loss, and 26 dB min isolation. It is ideal for diversity switch applications in the frequency range of 0-2000 MHz, offering high performance in surface mount construction.
HMC536LP2TR
Analog Devices' HMC536LP2TR is a GAAS SPDT RF switch with 1.3 dB max insertion loss, 23 dB min isolation, and 6000 MHz max operating frequency. Ideal for applications requiring fast 0.07 us on time, it has a surface mount package suitable for -40 to 85 °C environments.
UPD5713TK-E2-A
Nec Electronics America
SPDT; Construction: COMPONENT; Maximum Operating Frequency: 2500 MHz; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -45 Cel; Maximum Insertion Loss: 1.2 dB;
HMC536LP2ERTR
Analog Devices' HMC536LP2ERTR is a GAAS SPDT RF switch with 1.3 dB max insertion loss, 23 dB min isolation, and 6000 MHz max operating frequency. Ideal for applications requiring fast switching times and high performance in RF/microwave systems. Package body material is plastic/epoxy for surface mounting feature.
HMC547LP3E
Analog Devices' HMC547LP3E is a SPDT RF/Microwave switch with 2.5 dB max insertion loss, 33 dB min isolation, and 30 dBm CW input power. It operates from -40 to 85°C, suitable for applications requiring high-frequency switching in components like surface-mount devices up to 20 GHz.
HMC427ALP3ETR
Analog Devices' HMC427ALP3ETR is a RF/Microwave Switch with 2.1 dB max insertion loss, 26.99 dBm CW input power, and 0-8000 MHz frequency range. Ideal for transfer switch applications due to its 50 ohm impedance and -40 to 85°C operating temperature range.
ADG918BRM-500RL7
ADG918BRM-500RL7 by Analog Devices is a CMOS RF/Microwave Diversity Switch with 8 terminals. It operates from -40 to 85 °C, with max freq of 4 GHz and min isolation of 34 dB. Ideal for applications requiring fast 0.0066 us switching time and low insertion loss of 1.25 dB.
ADG918BRMZ
The Analog Devices ADG918BRMZ is a CMOS RF/Microwave Diversity Switch with 8 terminals and 50 ohm impedance. It offers a max insertion loss of 1.25 dB, min isolation of 34 dB, and operates from 0 to 4000 MHz. Ideal for applications requiring fast switching times and high power handling up to 17.99 dBm CW.
UPG2183T6C-E2-A
SP4T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 2500 MHz;
UPG138GV
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 80 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMC641ALC4
HMC641ALC4 by Analog Devices is a RF/Microwave switch with max input power of 26.43 dBm, insertion loss of 3.5 dB, and operating frequency range from 0-20000 MHz. It is ideal for applications requiring diversity switching in environments with temperatures ranging from -40 to 85°C.
HMC607
SPDT; Technology: GAAS; Maximum Insertion Loss: 3.4 dB; Nominal On Time: .005 us; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -55 Cel;
HMC607G7
SPDT; JESD-609 Code: e4; Characteristic Impedance: 50 ohm; Maximum Insertion Loss: 2.3 dB; Maximum Operating Frequency: 6000 MHz; Minimum Operating Temperature: -40 Cel;
HMC641
SP4T; Technology: GAAS; Additional Features: HIGH ISOLATION; Maximum Operating Temperature: 85 Cel; Terminal Finish: Gold (Au); Minimum Operating Frequency: 0 MHz;
HMC641A
DIVERSITY SWITCH; Minimum Operating Frequency: 100 MHz; Maximum Operating Frequency: 18000 MHz; Maximum Insertion Loss: 3 dB; Minimum Operating Temperature: -55 Cel; Additional Features: HIGH ISOLATION;
HMC641A-SX
DIVERSITY SWITCH; Minimum Operating Frequency: 100 MHz; Characteristic Impedance: 50 ohm; Additional Features: HIGH ISOLATION; Maximum Operating Temperature: 85 Cel; Maximum Operating Frequency: 18000 MHz;
HMC641ATCPZ-EP-PT
SP4T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
HMC641ATCPZ-EP-RL7
SP4T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 20000 MHz;
HMC641LC4
SP4T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
HMC641LC4TR
SP4T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Port Termination: ABSORPTIVE;
HMC641LP4E
HMC641LP4ETR
SP4T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): -5;
HMC646LP2
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SOLCC6,.08,25;
HMC646LP2E
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): 5;
HMC646LP2ETR
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
HMC646LP2TR
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal On Time: .32 us;
SP4T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
SP4T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Nominal On Time: .088 us;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved