Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HMC435MS8G by Hittite Microwave is an SPDT RF/Microwave switch with 1.8 dB max insertion loss, 30 dB min isolation, and 4000 MHz max operating frequency. It operates from -40 to 85 °C with a power supply of 5V, making it ideal for high-frequency signal routing in various communication systems.
Median Price
$16.780
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
< 1k
NAC Semi
1+ parts
100+ parts
$12.750
1k+ parts
-
10k+ parts
Vyrian
Nova Conductors
Speed Components Ltd
LWI Electronics Inc
North Shore Components
AZTECH Wire
$9.186
Kepictronics
Aranea Global
This material is durable and lightweight, making the switch a reliable choice for various applications.
With a high maximum input power, this switch can handle strong signals without distortion, ensuring reliable performance.
The high compression point indicates low levels of signal distortion, making this switch suitable for high-power applications.
Operating at a standard 5V power supply, this switch is easy to integrate into existing systems.
With a high maximum operating temperature, this switch can withstand extended periods of use in various environments.
The low minimum operating temperature allows this switch to function reliably even in cold conditions.
With low insertion loss, this switch minimizes signal attenuation, ensuring efficient signal transmission.
As a Single Pole Double Throw switch, this device offers flexibility in routing RF signals, making it versatile for different applications.
Matching the standard impedance requirement, this switch ensures optimal signal transfer with most RF components.
With high isolation levels, this switch can prevent signal leakage or interference between different channels.
Supporting high operating frequencies, this switch is suitable for applications that require fast signal processing.
RF/Microwave Switches HMC435MS8G attributes and parameters. Explore more RF/Microwave Switches devices from Hittite Microwave
Compression Point (1 dB):
Additional Features:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
Minimum Isolation:
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Terminal Finish:
HMC435MS8G RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
NSN
5985-01-585-4292, 5985015854292
NIIN
015854292
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
Synsemi
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
Silicon Standard
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
UPG2418T6X-A
Renesas Electronics
RF/Microwave Switches;
HMC545AE
Analog Devices
Analog Devices' HMC545AE is a RF/Microwave switch with max. input power of 34 dBm, 0.7 dB insertion loss, and 50 ohm impedance. Ideal for diversity switching applications in the frequency range of 0-3000 MHz, it operates b/w -40 to 85°C with matte tin finish.
UPG2027TQ-E1-A
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
HMC547LP3ETR
Hittite Microwave
SPDT; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 20000 MHz; Additional Features: HIGH ISOLATION; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel;
CSH210
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Port Termination: REFLECTIVE;
HMC233G8
Analog Devices' HMC233G8 is a SPDT RF switch with 50 ohm impedance, offering 2.2 dB max insertion loss and handling up to 30 dBm CW power. With a frequency range of 0-6000 MHz, it's ideal for RF/microwave applications requiring high-performance switching capabilities in temperatures ranging from -40°C to 85°C.
SPM3501
Onsemi
Onsemi's SPM3501 RF/Microwave Switch offers 1.7 VSWR, 20 dBm compression point, and 1.3 dB max insertion loss. Ideal for SPDT applications up to 6000 MHz with -40 to 85 °C operating range. Features surface mount package with 6 terminals and requires a 3V power supply.
ADG918BCPZ-500RL7
ADG918BCPZ-500RL7 by Analog Devices is a RF/Microwave Switch with 1.25 dB max insertion loss, 36 dB min isolation, and 4000 MHz max operating frequency. It is used as a diversity switch in applications requiring high-frequency signal routing.
UPG2162T5N-A
DPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -45 Cel;
HMC284MS8GE
Hittite Microwave's HMC284MS8GE is a SPDT RF switch with 1.1 dB max insertion loss, 30 dB min isolation, and 3500 MHz max operating frequency. Ideal for RF/Microwave applications requiring high power handling up to 26.02 dBm CW input.
TGS8250XCCX
TGS8250XCCX by Texas Instruments is an RF/Microwave SPDT switch with 30 dBm CW power, 1.5 VSWR, and 2.7 dB insertion loss. Ideal for applications requiring frequency range of 0-18000 MHz, such as telecommunications and radar systems.
HMC1118LP3DETR
Analog Devices' HMC1118LP3DETR is a RF/Microwave SPDT switch with 50 ohm impedance, offering 18 dB isolation and 2 dB insertion loss. It operates from 0.009 MHz to 13000 MHz, handles up to +28 dBm CW power, and has a compression point of +37 dBm. Ideal for applications requiring high-frequency signal routing in communication systems.
TGS8422-SCC
TGS8422-SCC by Texas Instruments is an SP4T RF switch with 30 dBm CW power handling, VSWR of 1.3, and frequency range from 0-18000 MHz. Ideal for applications requiring high-frequency signal routing in RF/microwave systems.
UPG2005TB-E3
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal On Time: .02 us;
HMC435AMS8GETR
Analog Devices' HMC435AMS8GETR is a RF/Microwave Switch with 1.8 dB max insertion loss, 31 dBm CW input power, and 0-4000 MHz operating frequency range. Ideal for diversity switch applications, it operates b/w -40 to 85°C with a characteristic impedance of 50 ohm.
HMC174MS8E
Analog Devices' HMC174MS8E is a GAAS technology RF/Microwave Switch with 1.8 dB max insertion loss, 15 dB min isolation, and 36 dBm compression point. Ideal for diversity switch applications in the frequency range of 0-3000 MHz, it features a surface mount package with matte tin terminals.
NSVG1002MXT1G
NSVG1002MXT1G by Onsemi is an RF/Microwave Switch with AEC-Q100 screening. It features a Compression Point of 30 dBm, Max Insertion Loss of 0.95 dB, and Min Isolation of 20 dB. Ideal for automotive applications due to its wide operating temperature range (-40 to 105 °C) and SP3T configuration supporting frequencies from 1-6000 MHz.
HMC849ALP4CE
HMC849ALP4CE by Analog Devices is a RF/Microwave switch with a max input power of 32.99 dBm and a max insertion loss of 2.5 dB. It is commonly used as a diversity switch in applications requiring a characteristic impedance of 50 ohms and an operating frequency range from 0 MHz to 6000 MHz.
ADG918BRM
ADG918BRM by Analog Devices is a CMOS RF/Microwave switch with 8 terminals. It operates from 0 to 4000 MHz, handling up to 17.99 dBm CW power and has a compression point of 20 dBm. Ideal for diversity switching applications due to its low insertion loss of 1.25 dB and fast 0.005 us on time.
HMC349AMS8GETR
Analog Devices' HMC349AMS8GETR is an RF/Microwave switch with max input power of 33.5 dBm, insertion loss of 2.1 dB, and operating frequency range from 100 MHz to 4 GHz. Ideal for diversity switching applications due to its 50 ohm impedance and wide temperature range (-40°C to 125°C).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DIVERSITY SWITCH; Maximum Insertion Loss: 1.8 dB; JESD-609 Code: e3; Characteristic Impedance: 50 ohm; Terminal Finish: MATTE TIN; Maximum Operating Frequency: 4000 MHz;
HMC435AMS8GE
HMC435AMS8GE by Analog Devices is a RF/Microwave switch with a max input power of 30.97 dBm and a max insertion loss of 1.8 dB. It is commonly used as a diversity switch in applications requiring a characteristic impedance of 50 ohm and an operating frequency range from 0 MHz to 4000 MHz.
HMC427ALP3E
TRANSFER SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 8000 MHz; Nominal On Time: .01 us;
HMC435MS8GE
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 4000 MHz; Compression Point (1 dB): 31 dBm;
HMC435MS8GETR
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; Characteristic Impedance: 50 ohm;
HMC435MS8GTR
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 5; Minimum Operating Temperature: -40 Cel;
HMC427ALP3ETR
TRANSFER SWITCH; Maximum Input Power (CW): 26.99 dBm; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 0 MHz; Additional Features: HIGH ISOLATION; Construction: COMPONENT;
HMC427LP3TR
TRANSFER SWITCH;
HMC446ETR
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 41 dBm;
HMC427LP3ETR
HMC435AMS8G
DIVERSITY SWITCH; Maximum Operating Frequency: 4000 MHz; Maximum Input Power (CW): 30.97 dBm; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: 1.8 dB; Minimum Operating Frequency: 0 MHz;
HMC446
DIVERSITY SWITCH; Construction: COMPONENT; Additional Features: RECEIVER FREQUENCY IS 824 TO 894 MHZ; Minimum Operating Frequency: 824 MHz; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
HMC427LP3
TRANSFER SWITCH; Construction: COMPONENT; Terminal Finish: TIN LEAD; Additional Features: HIGH ISOLATION; Maximum Insertion Loss: 2.1 dB; Maximum Operating Frequency: 8000 MHz;
HMC427LP3E
TRANSFER SWITCH; Maximum Insertion Loss: 2.1 dB; Terminal Finish: Matte Tin (Sn); Additional Features: HIGH ISOLATION; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel;
HMC446E
DIVERSITY SWITCH; Maximum Insertion Loss: 1 dB; Minimum Operating Frequency: 824 MHz; JESD-609 Code: e3; Additional Features: RECEIVER FREQUENCY IS 824 TO 894 MHZ; Terminal Finish: Matte Tin (Sn);
HMC446TR
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
HMC484MS8G
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Construction: COMPONENT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved