Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HMC435MS8GTR by Hittite Microwave is a SPDT RF switch with 1.8 dB max insertion loss, 30 dB min isolation, and 4000 MHz max operating frequency. Ideal for RF/Microwave applications, it has an 85°C max operating temp and operates on a 5V power supply in surface mount packages.
Median Price
$26.920
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Component Electronics Inc.
1+ parts
100+ parts
$20.190
1k+ parts
$17.500
10k+ parts
-
Vyrian
Nova Conductors
Prism Electronics
Resion
Bristol Electronics
AZTECH Wire
$10.431
Aranea Global
Perfect Parts
The plastic/epoxy package body material provides durability and protection for the internal components of the switch, ensuring reliable performance in various environmental conditions.
The high compression point of 31 dBm allows the switch to handle high power levels without distortion, making it suitable for high-power RF applications.
The requirement for a 5V power supply makes the switch compatible with standard power sources, simplifying integration into existing systems.
The presence of 8 terminals provides flexibility in connecting the switch to other components or systems, enabling versatile use in different setups.
The wide maximum operating temperature range of 85°C ensures that the switch can perform reliably in various temperature conditions, increasing its versatility.
The low minimum operating temperature of -40°C allows the switch to function effectively in cold environments, expanding its usability in different applications.
The tin/lead terminal finish provides good solderability and electrical conductivity, ensuring secure connections and reliable signal transmission.
The low maximum insertion loss of 1.8 dB minimizes signal degradation when the switch is in use, maintaining signal integrity in RF or microwave circuits.
Being a Single-Pole Double-Throw (SPDT) switch, it offers the flexibility of switching between two separate RF or microwave paths, enhancing system functionality.
The minimum isolation of 30 dB ensures that signals on one path do not interfere with signals on the other path, optimizing signal clarity and reducing crosstalk.
The surface mounting feature allows for easy and secure installation on PCBs, saving space and simplifying assembly in compact electronic devices.
The high maximum operating frequency of 4000 MHz enables the switch to handle a wide range of RF or microwave signals, making it suitable for high-frequency applications.
RF/Microwave Switches HMC435MS8GTR attributes and parameters. Explore more RF/Microwave Switches devices from Hittite Microwave
Compression Point (1 dB):
Maximum Insertion Loss:
Minimum Isolation:
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Terminal Finish:
HMC435MS8GTR RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Intersil
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
UPG2010TB-E3-A
Renesas Electronics
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 36.02 dBm;
HMC348LP3TR
Analog Devices
SPDT;
HMC252QS24TR
Analog Devices' HMC252QS24TR is a SP6T RF/Microwave switch with 26 dBm compression point, 1.8 dB max insertion loss, and 3000 MHz max operating frequency. Ideal for applications requiring fast 0.12 us on time, it offers 50 ohm impedance and -40 to 85 °C temp range in a surface mount package.
UPG2151T5K
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Insertion Loss: .65 dB;
UPG2009TB-E3-A
Nec Compound Semiconductor Devices
SPDT; Terminal Finish: Tin/Bismuth (Sn/Bi); Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 36.02 dBm; Maximum Insertion Loss: .5 dB; Minimum Operating Temperature: -45 Cel;
SKY13377-313LF
Skyworks Solutions
SKY13377-313LF by Skyworks Solutions is an RF/Microwave SPDT switch with 1.45 dB max insertion loss, 40 dBm CW power handling, and 500-6000 MHz frequency range. Ideal for applications requiring high-frequency signal routing in components operating b/w -40 to 85°C.
UPG168TB-E4
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TSSOP6,.08;
SKY13380-350LF
SKY13380-350LF by Skyworks Solutions is a RF/Microwave switch with a max input power of 40 dBm. It operates in temperatures ranging from -40 to 85 °C and has a max insertion loss of 0.8 dB. This diversity switch is suitable for applications requiring high-frequency switching capabilities.
HMC849ALP4CE
Hittite Microwave
HMC849ALP4CE by Hittite Microwave is a RF/Microwave switch with max input power of 32.99 dBm and insertion loss of 2.5 dB. It operates in a temperature range of -40 to 85 °C and is commonly used as a diversity switch in various applications.
UPG137GV
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -50 Cel;
F2910NBGP8
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Characteristic Impedance: 50 ohm; Nominal On Time: 265 us; Minimum Operating Temperature: -55 Cel;
F2912NCGI
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 3.3; Maximum Voltage Standing Wave Ratio: 1.09;
HMC194MS8E
Analog Devices' HMC194MS8E is a SPDT RF/Microwave switch with 1.1 dB max insertion loss, handling up to 26.99 dBm CW power. Operating from -40°C to 85°C, it supports frequencies from 0-3000 MHz. Ideal for applications requiring high-frequency signal routing in various electronic systems.
UPG2163T5N-A
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
HMC231G7
HMC231G7 by Analog Devices is an RF/Microwave SPST switch with a max operating frequency of 6 GHz and 37 dB min isolation. It features a 2.4 dB max insertion loss, 0.006 us nominal on time, and can handle up to 30 dBm CW input power. This component is ideal for applications requiring high-frequency signal routing in communication systems.
HMC232
Analog Devices' HMC232 RF/Microwave Switch offers 30 dBm CW input power, 26 dBm compression point, and 3.4 dB max insertion loss. Ideal for applications requiring SPDT technology with a frequency range of 0-15000 MHz and min isolation of 40 dB.
QS4A210QG8
SP4T; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
ADRF5026BCCZN-R7
Analog Devices' ADRF5026BCCZN-R7 is a CMOS SPDT RF switch with 50 ohm impedance, 1.15 VSWR, and 27 dBm compression point. It operates from 100 MHz to 44 GHz, handling up to 25 dBm CW power. Ideal for RF/microwave applications requiring high-frequency switching in compact designs.
HMC547ALC3
Analog Devices' HMC547ALC3 is a RF/Microwave Switch with max input power of 25 dBm, insertion loss of 3 dB, and operating frequency range from 0-28000 MHz. Ideal for diversity switch applications due to its 50 ohm impedance and wide temperature range (-40 to +85 °C).
HMC234C8
Analog Devices' HMC234C8 is an RF/Microwave SPDT switch with 2.4 dB max insertion loss, 30 dBm CW input power, and 0-8000 MHz frequency range. Ideal for applications requiring high-frequency signal routing in environments ranging from -40 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMC435AMS8GETR
DIVERSITY SWITCH; Maximum Insertion Loss: 1.8 dB; JESD-609 Code: e3; Characteristic Impedance: 50 ohm; Terminal Finish: MATTE TIN; Maximum Operating Frequency: 4000 MHz;
HMC435AMS8GE
HMC435AMS8GE by Analog Devices is a RF/Microwave switch with a max input power of 30.97 dBm and a max insertion loss of 1.8 dB. It is commonly used as a diversity switch in applications requiring a characteristic impedance of 50 ohm and an operating frequency range from 0 MHz to 4000 MHz.
HMC427ALP3E
TRANSFER SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 8000 MHz; Nominal On Time: .01 us;
HMC435MS8G
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: TSSOP8,.19; Minimum Isolation: 30 dB;
HMC435MS8GE
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 4000 MHz; Compression Point (1 dB): 31 dBm;
HMC435MS8GETR
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; Characteristic Impedance: 50 ohm;
HMC427ALP3ETR
TRANSFER SWITCH; Maximum Input Power (CW): 26.99 dBm; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 0 MHz; Additional Features: HIGH ISOLATION; Construction: COMPONENT;
HMC427LP3TR
TRANSFER SWITCH;
HMC446ETR
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 41 dBm;
HMC427LP3ETR
HMC435AMS8G
DIVERSITY SWITCH; Maximum Operating Frequency: 4000 MHz; Maximum Input Power (CW): 30.97 dBm; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: 1.8 dB; Minimum Operating Frequency: 0 MHz;
HMC446
DIVERSITY SWITCH; Construction: COMPONENT; Additional Features: RECEIVER FREQUENCY IS 824 TO 894 MHZ; Minimum Operating Frequency: 824 MHz; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
HMC427LP3
TRANSFER SWITCH; Construction: COMPONENT; Terminal Finish: TIN LEAD; Additional Features: HIGH ISOLATION; Maximum Insertion Loss: 2.1 dB; Maximum Operating Frequency: 8000 MHz;
HMC427LP3E
TRANSFER SWITCH; Maximum Insertion Loss: 2.1 dB; Terminal Finish: Matte Tin (Sn); Additional Features: HIGH ISOLATION; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel;
HMC446E
DIVERSITY SWITCH; Maximum Insertion Loss: 1 dB; Minimum Operating Frequency: 824 MHz; JESD-609 Code: e3; Additional Features: RECEIVER FREQUENCY IS 824 TO 894 MHZ; Terminal Finish: Matte Tin (Sn);
HMC446TR
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
HMC436MS8G
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved