Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FREQUENCY QUADRUPLER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
Median Price
$44.214
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
$48.750
100+ parts
-
1k+ parts
$32.960
10k+ parts
Verical
$39.678
Digiode
$40.270
Vyrian
Parana Technologies
$1.283
$1.194
IDEA Electronic Components Group
$1.380
$1.311
DigiPath Technology Company
$2.153
$2.067
Semicontronic
$36.030
$35.129
$34.949
Ampacity Inc.
Corphita
$38.151
QUARKTWIN TECHNOLOGY LTD
RF/Microwave Frequency Multipliers HMC370LP4TR attributes and parameters. Explore more RF/Microwave Frequency Multipliers devices from Hittite Microwave
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KYOCERA AVX
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
Changzhou Starsea Electronics
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
HMC448LC3B
Analog Devices
Analog Devices' HMC448LC3B is a RF/Microwave Frequency Multiplier with max input power of 20 dBm. Operating b/w -40 to 85°C, it doubles frequencies from 20-25 GHz. Ideal for applications requiring high frequency multiplication in a compact component design.
HMC1105
Analog Devices' HMC1105 is a GaAs RF frequency doubler with 50 ohm impedance, operating from 20-40 GHz. It can handle up to 17 dBm CW input power, with a max conversion loss of 16 dB. Ideal for RF/microwave applications requiring high-frequency multiplication in components.
HMC578LC3BTR
Hittite Microwave
FREQUENCY DOUBLER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Technology: PHEMT; Construction: COMPONENT; Maximum Voltage Standing Wave Ratio: 1.67;
HMC204MS8GETR
Analog Devices' HMC204MS8GETR is a GaAs technology RF frequency doubler with 8 terminals. Operating temperature ranges from -40°C to 85°C. Packaged in plastic/epoxy, it's ideal for surface mount applications in RF/microwave systems.
KSX2-722+
Mini-circuits
The Mini-circuits KSX2-722+ is a RF/Microwave Frequency Multiplier with max input power of 13 dBm. It operates as a frequency doubler from 1300 MHz to 3600 MHz, featuring a max conversion loss of 15.5 dB. Ideal for applications requiring high-frequency signal multiplication in environments ranging from -40°C to 85°C.
HMC156AC8
Analog Devices' HMC156AC8 is a RF/Microwave Frequency Doubler with 700-2400 MHz frequency range, 20 dB max conversion loss, and 27 dBm CW input power. It operates b/w -40°C to +85°C, ideal for applications requiring high-frequency signal multiplication in various RF systems.
HMC369LP3E
Analog Devices' HMC369LP3E is a RF/Microwave Frequency Doubler with 50 ohm impedance, operating from 9900 to 12700 MHz. It can handle up to 20 dBm CW input power and operates b/w -40°C to +85°C. Ideal for applications requiring frequency multiplication in RF/microwave systems.
AMMC-6140
Broadcom
FREQUENCY DOUBLER;
HMC158
Analog Devices' HMC158 is a RF/Microwave Frequency Doubler with 50 ohm impedance. It operates from 1300 MHz to 4000 MHz, offering a max conversion loss of 18 dB and handling up to 27 dBm CW input power. Ideal for applications requiring frequency multiplication in environments ranging from -55°C to 85°C.
HMC204MS8GE
Analog Devices' HMC204MS8GE is a GAAS technology RF frequency doubler with 50 ohm impedance. It operates from 4-8 GHz, handling up to 27 dBm CW input power. This surface-mount component is ideal for RF/microwave applications requiring high conversion efficiency.
AMMC-6120-W10
FREQUENCY DOUBLER; Maximum Operating Frequency: 20000 MHz; Maximum Supply Current: 105 mA; Power Supplies (V): 4.5; Maximum Input Power (CW): 15 dBm; Characteristic Impedance: 50 ohm;
CGD1040HI
NXP Semiconductors
FREQUENCY DOUBLER; Maximum Operating Frequency: 1003 MHz; Characteristic Impedance: 75 ohm; Minimum Operating Frequency: 40 MHz; Construction: MODULE;
CGD1044H,112
FREQUENCY DOUBLER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Construction: MODULE; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e4;
AMMP-6120-BLK
FREQUENCY DOUBLER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; JESD-609 Code: e4;
HMC814
Analog Devices' HMC814 is a RF/Microwave Frequency Multiplier with max input power of 10 dBm. Operating b/w -55°C to 85°C, it's a frequency doubler supporting 50 ohm impedance. Ideal for applications requiring frequency multiplication in the range of 6.5 GHz to 12.3 GHz.
HMC448LC3BTR
Analog Devices' HMC448LC3BTR is a GaAs RF frequency doubler with 12 terminals, operating from -40 °C to 85°C. It requires a 5V power supply and comes in a ceramic package for surface mount applications in RF/microwave systems.
XX1000-QT-0G0T
Mimix Broadband
FREQUENCY DOUBLER; Additional Features: HIGH RELIABILITY; Minimum Operating Temperature: -55 Cel; Construction: COMPONENT; Maximum Input Power (CW): 15 dBm; Minimum Operating Frequency: 7500 MHz;
HMC443LP4ETR
HMC443LP4ETR by Analog Devices is a RF/Microwave Frequency Multiplier with a max operating temperature of 85°C and a min operating temperature of -40°C. It has 24 terminals and requires a power supply of 5V. This device, made with GAAS technology, is commonly used as a frequency quadrupler in various applications.
HMC814LC3BTR
HMC814LC3BTR by Analog Devices is a RF/Microwave Frequency Multiplier with a plastic/epoxy package. It operates at temperatures ranging from -40°C to 85°C and requires a power supply of 5V. This frequency doubler has 12 terminals and a max supply current of 100mA, making it suitable for various RF and microwave applications.
HMC188MS8TR
Analog Devices' HMC188MS8TR is a GaAs RF frequency doubler with 8 terminals. It operates b/w -40 °C to 85°C, featuring a surface mount package made of plastic/epoxy. Ideal for applications requiring microwave frequency multiplication.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved