Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FREQUENCY DOUBLER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: 100 mA;
Median Price
$61.225
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Rochester
1+ parts
$35.370
100+ parts
$34.660
1k+ parts
$33.960
10k+ parts
-
Analog Devices Inc
$54.920
$41.337
$38.030
Mouser Electronics
$72.210
$53.470
DigiKey
$53.472
Newark
$74.380
$55.070
Verical
$40.903
Farnell
$49.440
Element14
$67.530
Digiode
$33.602
Nova Conductors
$49.922
Vyrian
Chip Stock
SPM Sales
Aztec Data Supply Inc.
$1.527
Parana Technologies
$1.762
$1.639
IDEA Electronic Components Group
$1.895
$1.800
Corohmni
$2.542
DigiPath Technology Company
$2.956
$2.838
Semicontronic
$30.060
$29.308
$29.158
Corphita
$31.833
Continental Prestige Electronics
$48.570
$40.920
Netroflash
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Lixinc
Argo Parts USA
Perfect Parts
RF/Microwave Frequency Multipliers HMC814LC3BTR attributes and parameters. Explore more RF/Microwave Frequency Multipliers devices from Hittite Microwave
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
Sensitron Semiconductor
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Semitron
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
Taitron Components
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
IRLML6402TRPBF
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
HMC814LC3BTR
Hittite Microwave
HMC1096LP3E
Analog Devices
Analog Devices' HMC1096LP3E is a RF/Microwave Frequency Doubler with 3800-5600 MHz frequency range, 5 dBm CW input power, and 50 ohm impedance. It operates b/w -40 to 85 °C, making it ideal for applications requiring high-frequency signal multiplication in various electronic systems.
AMMP-6125-BLKG
Broadcom
FREQUENCY DOUBLER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; Maximum Operating Frequency: 24000 MHz;
CGD1044H
NXP Semiconductors
FREQUENCY DOUBLER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Maximum Supply Current: 470 mA; Package Equivalence Code: SOT-115J; Minimum Operating Temperature: -20 Cel;
HMC695LP4TR
Analog Devices' HMC695LP4TR is a RF/Microwave Frequency Multiplier with 24 terminals, operating at 5V. It features GaAs technology, quad-rupling frequency and has a max supply current of 75mA. Ideal for surface mount applications in temperature range -40 to 85 °C.
HMC443LP4TR
Analog Devices' HMC443LP4TR is a RF/Microwave Frequency Multiplier with 24 terminals, operating at 2450-2800 MHz. It has a max input power of 20 dBm and operates on a 5V supply with 69mA current draw. Ideal for frequency quadrupling applications due to its GaAs technology and characteristic impedance of 50 ohms.
HMC942LP4E
HMC942LP4E by Analog Devices is a RF/Microwave Frequency Multiplier with max input power of 10 dBm. Operating b/w -40 to 85°C, it doubles frequencies from 12.5 to 15.5 GHz. Ideal for applications requiring frequency doubling in a compact component design.
HMC695LP4ETR
Analog Devices' HMC695LP4ETR is a GAAS technology RF/Microwave Frequency Multiplier with 24 terminals, operating at -40 to 85 °C. It requires a 5V power supply, draws a max current of 75mA, and features matte tin terminal finish. Ideal for frequency quadrupling applications, it comes in a plastic/epoxy package for surface mounting.
934063951112
FREQUENCY DOUBLER; Minimum Operating Frequency: 40 MHz; Characteristic Impedance: 75 ohm; Maximum Operating Frequency: 1003 MHz; Construction: MODULE;
HMC576LC3BTR
Analog Devices' HMC576LC3BTR is a GaAs RF frequency doubler with 12 terminals, gold finish, and operates b/w -40°C to 85°C. It requires a 5V power supply and comes in a surface mount package. Ideal for RF/microwave applications requiring frequency multiplication.
HMC573LC3BTR
Analog Devices' HMC573LC3BTR is a GaAs RF frequency doubler with 12 terminals, operating from -40°C to 85°C. It requires a 5V power supply and features a ceramic package body material with gold terminal finish. Ideal for RF/microwave applications, it is surface mountable for easy integration.
HMC573LC3BRTR
Analog Devices' HMC573LC3BRTR is a RF/Microwave Frequency Multiplier with 12 terminals, operating at temperatures from -40 to 85°C. Utilizing GaAs technology, it requires a 5V power supply and features a ceramic package for surface mount applications.
HMC370LP4
HMC370LP4 by Analog Devices is a RF/Microwave Frequency Multiplier with 24 terminals, operating at frequencies b/w 14.4 GHz to 16.4 GHz. It has a max input power of 20 dBm and operates on a 5V power supply, drawing a max current of 73 mA. Ideal for applications requiring frequency quadrupling in the temperature range of -40°C to +85°C.
MLD-0416LSM
Marki Microwave
MLD-0416LSM by Marki Microwave is a RF/Microwave Frequency Multiplier with max input power of 25 dBm. It operates as a frequency doubler from 2 GHz to 8 GHz, featuring a max conversion loss of 17 dB. This component is designed for surface mount applications in the temperature range of -55°C to 100°C.
HMC578LC3BTR
FREQUENCY DOUBLER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Technology: PHEMT; Construction: COMPONENT; Maximum Voltage Standing Wave Ratio: 1.67;
HMC445LP4ETR
Analog Devices' HMC445LP4ETR is a RF/Microwave Frequency Multiplier with 24 terminals, operating at 5V. It features a max supply current of 104mA and operates b/w -40 °C to 85°C. Ideal for frequency quadrupling applications, this device uses bipolar technology and has a surface mounting feature.
HMC443LP4E
Analog Devices' HMC443LP4E is a RF/Microwave Frequency Multiplier with 24 terminals, operating at 9800-11200 MHz. It has a max input power of 20 dBm and operates on a 5V supply with a current draw of 69 mA. Ideal for applications requiring frequency quadrupling in the temperature range of -40 to 85°C.
HMC187AMS8TR
Analog Devices' HMC187AMS8TR is a GaAs RF frequency doubler with 8 terminals, operating from -40 °C to 85°C. Packaged in plastic/epoxy, it's ideal for surface mount applications in RF/microwave systems requiring frequency multiplication.
CGD1042HI
FREQUENCY DOUBLER; Maximum Operating Frequency: 1003 MHz; Construction: MODULE; Minimum Operating Frequency: 40 MHz; Characteristic Impedance: 75 ohm;
CGD1044HI
FREQUENCY DOUBLER; Maximum Operating Frequency: 1003 MHz; Characteristic Impedance: 75 ohm; Construction: MODULE; Minimum Operating Frequency: 40 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMC814LC3BTR by Analog Devices is a RF/Microwave Frequency Multiplier with a plastic/epoxy package. It operates at temperatures ranging from -40°C to 85°C and requires a power supply of 5V. This frequency doubler has 12 terminals and a max supply current of 100mA, making it suitable for various RF and microwave applications.
HMC814LC3B
FREQUENCY DOUBLER; Minimum Operating Frequency: 6500 MHz; Maximum Operating Frequency: 12300 MHz; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e4; Maximum Operating Temperature: 85 Cel;
Analog Devices' HMC814LC3B is a RF/Microwave Frequency Multiplier with 10 dBm CW input power, operating from -40 to 85°C. It functions as a frequency doubler, supporting frequencies from 6.5 to 12.3 GHz. Ideal for applications requiring high-frequency signal multiplication in various electronic systems.
HMC814
FREQUENCY DOUBLER; Minimum Operating Frequency: 6500 MHz; Maximum Operating Frequency: 12300 MHz; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 85 Cel;
HMC8342LS6
FREQUENCY DOUBLER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: CERAMIC, METAL-SEALED COFIRED; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
HMC8342LS6TR
FREQUENCY DOUBLER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: CERAMIC, METAL-SEALED COFIRED; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved