Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SPLITTER; Construction: COAXIAL; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 85 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$0.791
$0.736
IDEA Electronic Components Group
$0.851
$0.808
DigiPath Technology Company
$1.328
$1.274
AZTECH Wire
$16.805
One Stop Electronics
$18.000
Semicontronic
$30.000
$29.250
$29.100
QUARKTWIN TECHNOLOGY LTD
Corphita
RF/Microwave Splitter/Combiners HMC-C005 attributes and parameters. Explore more RF/Microwave Splitter/Combiners devices from Hittite Microwave
Additional Features:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
HMC-C005 RF & Microwave trade compliance attributes, and parameters.
ECCN
3A001.A.11.B
ECCN Governance
EAR
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Daco Semiconductor
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
MAX9988EGP
Maxim Integrated
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Maximum Input Power (CW): 20 dBm;
SCA-4-10+
Mini-circuits
Mini-circuits SCA-4-10+ is an RF/Microwave Combiner with 26.99 dBm CW power, 1.38 VSWR, and 2.5 dB insertion loss. Ideal for combining signals in the frequency range of 5-1000 MHz, it operates b/w -40 to 85°C making it suitable for various RF applications.
SBB-2-23+
The Mini-circuits SBB-2-23+ is an RF/Microwave splitter/combiner with a max input power of 40 dBm, VSWR of 1.29, and insertion loss of 1 dB. Ideal for applications requiring signal splitting or combining in the frequency range of 2000-2300 MHz. Suitable for surface mount installations with a temperature range from -40 to 85°C.
ADP-2-1W+
Mini-circuits' ADP-2-1W+ is a RF/Microwave splitter/combiner with max input power of 33.01 dBm and insertion loss of 1 dB. It operates from 1 MHz to 650 MHz, offering min isolation of 20 dB. Ideal for surface mount applications in RF systems requiring impedance matching and signal distribution.
ADA4304-3ACPZ-R2
Analog Devices
ADA4304-3ACPZ-R2 by Analog Devices is a 16-terminal RF splitter with characteristic impedance of 75 ohm. It operates from -40 to 85 °C, suitable for frequencies ranging from 54 MHz to 865 MHz. The device has a max supply current of 105 mA and is designed for surface mount applications in RF/Microwave systems.
HMC-C007
Analog Devices' HMC-C007 is a 50 ohm RF splitter with max input power of 13.01 dBm, operating from 500 MHz to 18 GHz. Constructed coaxially with gold finish, it's ideal for RF/Microwave applications in temperatures ranging from -55°C to 85°C.
SCPJ-2-9
Mini-circuits SCPJ-2-9 is an RF/Microwave Combiner with 8 terminals, 50 ohm impedance, and 1.8 dB insertion loss. It operates from 200 MHz to 900 MHz, handles up to 30 dBm CW power, and has a VSWR of 1.42. Ideal for surface mount applications in temperature range -40°C to +85°C.
4142
Api Technologies
4142 by Api Technologies is a COAXIAL RF/Microwave SPLITTER with max input power of 33.01 dBm and VSWR of 1.35. It operates b/w 4-8 GHz, offering low insertion loss at 0.4 dB, ideal for signal splitting in high-frequency applications.
SBB-2-23
The Mini-circuits SBB-2-23 is a RF/Microwave splitter/combiner with max input power of 40 dBm, VSWR of 1.29, and max insertion loss of 1 dB. It operates b/w 2000-2300 MHz, ideal for signal splitting and combining in RF/microwave applications.
42030
Anaren
Anaren 42030 is a COAXIAL RF/Microwave SPLITTER with 40 dBm CW power, 1.4 VSWR, and 0.6 dB insertion loss. Ideal for applications requiring signal splitting in the frequency range of 4-12 GHz.
ADA4302-4ACPZ-RL
ADA4302-4ACPZ-RL by Analog Devices is a 75 ohm RF splitter with 20 terminals, operating from 54 MHz to 865 MHz. It has a max supply current of 240 mA and operates b/w -40 °C to +85°C. Ideal for RF/Microwave applications requiring surface mount components.
QCN-19D+
QCN-19D+ by Mini-circuits is a RF/Microwave Combiner with 6 terminals, operating from 1100 MHz to 1925 MHz. It offers low insertion loss of 0.9 dB and high isolation of 19 dB. Ideal for surface mount applications in environments ranging from -55°C to 100°C.
JPS-2-1N+
JPS-2-1N+ by Mini-circuits is an RF/Microwave Splitter/Combiner with max input power of 30 dBm, VSWR of 1.22, and insertion loss of 0.5 dB. Ideal for applications requiring a 50 ohm characteristic impedance, operating b/w 350-550 MHz in temperatures ranging from -40 to 85°C.
JPS-2-1
The Mini-circuits JPS-2-1 RF/Microwave Combiner has a max input power of 30 dBm and VSWR of 1.3, with a low insertion loss of 0.9 dB. It operates b/w -40 to 85°C, ideal for combining RF signals in applications up to 500 MHz.
Spectrum Control
SPLITTER; Maximum Input Power (CW): 33.01 dBm; Construction: COAXIAL; Maximum Insertion Loss: .4 dB; Maximum Voltage Standing Wave Ratio: 1.35; Maximum Operating Frequency: 8000 MHz;
MAX9988ETP
SPLITTER;
WP4P+
WP4P+ by Mini-circuits is a RF/Microwave Combiner with 12 terminals, 50 ohm impedance, and max insertion loss of 1.4 dB. It operates b/w 1710-2025 MHz, offers min isolation of 19 dB, and can handle up to 31.76 dBm CW power. Ideal for applications requiring high-frequency signal combining in compact setups.
SBTC-2-10LX+
Mini-circuits SBTC-2-10LX+ is an RF/Microwave splitter/combiner with max input power of 26.99 dBm, VSWR of 1.17, and max insertion loss of 1.4 dB. Ideal for applications requiring a device type that operates b/w 5-1000 MHz with a temp range from -40 to 85°C.
58247-3
Commscope
SPLITTER; Maximum Voltage Standing Wave Ratio: 1.1; Maximum Insertion Loss: 10 dB; Maximum Operating Frequency: 2300 MHz; Minimum Operating Frequency: 2100 MHz;
QCN-19D
The Mini-circuits QCN-19D is a RF/Microwave Combiner with 6 terminals, operating from 1100 MHz to 1925 MHz. It offers low insertion loss of 0.9 dB and high isolation of 19 dB. Constructed with ceramic body material, it is ideal for surface mount applications in hybrid technology setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Hittite Microwave
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved