Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Hirose Electric TM5RJ2-66(52) is a telecom & datacom connector with POLYBUTYLENE TEREPHTHALATE insulator. Featuring 6 contacts, it has a rated current of 0.5A and operates b/w -25 to 60°C. Ideal for commercial applications, this right-angle jack connector offers durability with 200 cycles and solder termination.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Ampacity Inc.
$2.500
AZTECH Wire
$11.378
Bastille Electronics
The compact size of the connector allows for efficient use of space on a circuit board.
The slim width of the connector helps in maximizing the density of connectors on the board.
The use of this material provides good insulation properties and durability for the connector.
The connector can operate at high temperatures without any performance issues.
The connector can handle a decent amount of current for signal transmission.
Having 6 contacts allows for multiple connections to be made using a single connector.
The right angle mounting style provides flexibility in installation and layout design.
Telecom & Datacom Connectors TM5RJ2-66(52) attributes and parameters. Explore more Telecom & Datacom Connectors devices from Hirose Electric
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Gender:
Contact Style:
Durability:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
TM5RJ2-66(52) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Hirose Electric Co., Ltd. is a Japanese company specializing in the manufacturing of electric connectors. The company was founded in 1937 as Hirose Manufacturing, changed its name to Hirose Electric in August 1963 and started selling internationally in 1968. Hirose also manufactures flexible printed circuits for smartphones and gets about 70 percent of revenue from outside Japan.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
New Jersey Semiconductor Products
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1554216002
Molex
WIRE AND CABLE;
Synsemi
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
Multicomp Pro
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
48258-0002
Molex 48258-0002 is a USB connector with gold termination, suitable for telecom/datacom applications. It features a body size of 0.571" x 0.272" x 0.551", glass-filled polyamide insulator, and phosphor bronze contacts. With UL 94V-0 flammability rating, it operates b/w -25°C to 85°C and supports up to 1.5A signal current.
5-2301996-5
TE Connectivity
TE Connectivity 5-2301996-5 is a telecom & datacom connector with EMI shielding, LCP insulator, and tin termination. It has 8 contacts, UL94V-0 flammability rating, and operates b/w -40°C to 85°C. Ideal for board mounting applications in telecommunications and data communication systems.
98435-111LF
Amphenol Communications Solutions
Amphenol's 98435-111LF is a Telecom & Datacom Connector with Matte Tin finish, plastic insulator, and 8 contacts. It is a female jack connector for surface mount applications on boards, meeting UL 94V-0 flammability standards.
3021005-03
Qualtek Electronics
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
33TS3101S-88N
Conec
33TS3101S-88N by Conec is a Telecom & Datacom Connector with GOLD OVER NICKEL termination. Featuring POLYETHYLENE insulator, it has 8 contacts and STAINLESS STEEL shell. Ideal for telecom/datacom applications, this UL 94V-0 rated connector is FEMALE gendered with JACK body style for PANEL mounting.
PX0844/A/0M50/A
Bulgin
USB CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
10132328-10011LF
Amphenol's 10132328-10011LF USB connector features 24 contacts, POLYETHYLENE insulation, and NICKEL shell finish. With a rated current of 5A, it is ideal for telecom & datacom applications. This female connector has a durability of 10k cycles and operates b/w -55 to 85°C.
L829-1J1T-43
Bel Fuse
Bel Fuse L829-1J1T-43 is a Telecom & Datacom Connector with 0.692" body length, 0.44" width, and 0.945" depth. Featuring TIN SILVER COPPER termination finish, it's ideal for board and panel mounting in telecom applications. This UL-certified connector has 8 contacts, staggered PCB pattern, and right-angle mounting style.
DX07S024WJ3R400
Japan Aviation Electronics Industry
DX07S024WJ3R400 by Japan Aviation Electronics Industry is a USB connector with 24 contacts. Features gold over nickel termination, polyethylene insulator, and stainless steel shell. Ideal for telecom & datacom applications requiring surface mount board mounting of female connectors.
74990101210
Wuerth Elektronik & Kg
74990101210 by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, featuring TIN over Nickel termination finish and Polyethylene insulator. It has a Nickel shell finish, Copper Alloy shell material, and is UL 94V-0 rated. Ideal for board mounting in telecom and datacom applications.
1-2295018-2
TE Connectivity 1-2295018-2 USB Connector has 24 contacts, rated at 5A for signal current. With a durable stainless steel shell and polyethylene insulator, it operates b/w -30 to 85°C. Ideal for telecom/datacom applications with surface mount termination and nickel finish.
6116075-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Ports: 1; Mounting Option-1: LOCKING; IEC Conformity: NO;
85513-5113
The Molex 85513-5113 is a telecom and datacom connector with 8 contacts. It features a surface mount termination and a polyethylene insulator material. This jack-style connector is commonly used in board-mounted applications.
500254-1931
The Molex 500254-1931 is a telecom/datacom connector with 0.591" body length, 0.632" width, and 0.478" depth. It offers 100000000 ohm insulation resistance and 500VAC dielectric voltage withstand. Ideal for board mounting with solderable retention clips, it has a rated current of 0.5A and operates b/w -20 to 85°C.
555153-1
Api Technologies
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 710VDC; Mounting Option-1: LOCKING; Termination Type: SOLDER;
6339160-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Rated Current - Signal: 1.5 A; MIL Conformity: NO; No. of Rows Loaded: 1;
ZX360D-B-10P(30)
Hirose Electric
ZX360D-B-10P(30) by Hirose Electric is a USB connector with 10 contacts, liquid crystal polymer insulator, and tin shell finish. Ideal for telecom & datacom applications, it features a right-angle mounting style and surface mount termination on stainless steel shell material.
1734753-1
TE Connectivity USB Connector 1734753-1 with POLYBUTYLENE TEREPHTHALATE insulator, rated for 1A signal current, and 5000 cycle durability. Ideal for telecom/datacom applications requiring a straight receptacle with SOLDER termination and POLARIZED HOUSING. Operating temperature range from -20 to 60 °C.
6-641337-3
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; Mixed Contacts: NO; IEC Conformity: NO; DIN Conformance: NO; Body or Shell Style: PLUG;
20825000001
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TM5RJ2-66(50)
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Gold (Au); Contact Material: NOT SPECIFIED;
TM5RJ2-66
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mounting Type: BOARD;
TM5RJ-88(50)
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: Gold (Au); Contact Material: NOT SPECIFIED;
TM5RJ1-4848(50)
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Gold (Au);
TM5RJ3-88(50)
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
TM5RJ3-88(60)
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Mounting Type: BOARD; Polarization Key: POLARIZED HOUSING;
TM5RJ3-44(50)
TM5RJ3-88
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Terminal Pitch (mm): 2.032;
TM5RJ3-88(51)
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4;
TM5RJ3-88(52)
Telecom and Datacom Connectors; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Gold (Au); JESD-609 Code: e4;
TM5RJ1-66(50)
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: Gold (Au); Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
TM5RJ2-64(52)
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Type: BOARD; Mounting Style: RIGHT ANGLE; Terminal Length: .118 inch;
TM5RJ2-44
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Body Depth: .551 inch;
TM5RJ2-62
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mounting Style: RIGHT ANGLE;
TM5RJ2-64
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Insulation Resistance: 100000000 ohm;
TM5RJ2-88
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Body Width: .551 inch;
TM5RJ3-64
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Rated Current - Signal: .5 A;
TM5RJ2-64(50)
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Total No. of Contacts: 6; Mounting Option-1: LOCKING; Body Length: .583 inch;
TM5RJ3-66(50)
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Maximum Operating Temperature (Cel): 60; Additional Features: ROHS COMPLIANT; Minimum Operating Temperature: -25 Cel;
TM5RJ3-66(60)
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Resistance: 200 mohm; Terminal Length: .118 inch; Plating Thickness (inch): 50u;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved