Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HR10A-10TP-12P(73) by Hirose Electric is a threaded circular connector with 12 contacts, silver contact finish, and nickel-plated shell. It is designed for cable mounting applications requiring a solid backshell, solder termination, and male contact gender. The connector features a zinc alloy and brass shell construction in plug body style with size 10.
Median Price
$37.000
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$18.110
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$33.310
$25.600
$25.180
Interstate Connecting
$29.839
DigiKey
$38.500
$27.817
$26.006
Newark
$40.490
$33.170
Vyrian
Nova Conductors
Advanced Electronics
$5.649
$5.141
$4.632
Aztec Data Supply Inc.
$8.790
AZTECH Wire
$14.812
Corohmni
$23.124
Ampacity Inc.
$24.200
Semicontronic
$23.595
$23.474
Authorized Procurement Solutions
Aranea Global
Continental Prestige Electronics
Argo Parts USA
Perfect Parts
This silver termination contact finish provides excellent conductivity and corrosion resistance, ensuring reliable performance.
Featuring a threaded coupling type, this circular connector offers a secure and sturdy connection that is resistant to vibration and shock.
The nickel plated shell finish enhances durability and provides protection against environmental factors, making this connector suitable for various applications.
With a circular connector type, this product offers a versatile and compact solution for connecting multiple devices in a wide range of industries.
With a total of 12 contacts, this connector allows for multiple connections in a single device, providing flexibility and efficiency in complex systems.
The solid backshell design of this connector provides strain relief and protection for the cable termination, ensuring secure and long-lasting connections.
Featuring a cable mounting type, this connector can easily be installed on various cable types, offering convenience and versatility in installation.
Constructed with a combination of zinc alloy and brass, the shell material of this connector offers a balance of strength, conductivity, and durability.
The solder termination type of this connector ensures a strong and reliable connection, making it suitable for high-performance and critical applications.
With a male contact gender, this connector is designed to mate with female connectors, providing compatibility and easy integration in systems.
Featuring a plug body style, this connector offers a simple and secure connection method, ideal for applications where frequent connections and disconnections are necessary.
With a shell size of 10, this connector is compact yet robust, suitable for space-constrained applications without compromising on performance.
Other Function Circular Connectors HR10A-10TP-12P(73) attributes and parameters. Explore more Other Function Circular Connectors devices from Hirose Electric
Additional Features:
Backshell Type:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Shell Finish:
Shell Material:
Shell Size:
Termination Type:
Total No. of Contacts:
HR10A-10TP-12P(73) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Hirose Electric Co., Ltd. is a Japanese company specializing in the manufacturing of electric connectors. The company was founded in 1937 as Hirose Manufacturing, changed its name to Hirose Electric in August 1963 and started selling internationally in 1968. Hirose also manufactures flexible printed circuits for smartphones and gets about 70 percent of revenue from outside Japan.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Shenzhen Yixinsemi Electronics
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
T4071017041-001
TE Connectivity
TE Connectivity's T4071017041-001 Circular Connector has a max operating temp of 85°C and -40°C min. It features 4 contacts, rated at 3A for signal current. With a brass shell and nickel finish, it is ideal for cable mounting applications requiring a polarized female connector.
T3374501
Amphenol
Amphenol T3374501 is a circular connector with bayonet coupling, nickel finish, and 5 contacts. It is used for cable mounting applications requiring solid backshell and male contact gender. The connector features metal shell material and solder termination.
32065
Molex
CIRCULAR CONNECTOR; Manufacturer Series: 32065; IEC Conformity: NO; Body or Shell Style: RECEPTACLE; DIN Conformance: NO; MIL Conformity: NO;
AT04-3P-RJ120
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
206305-1
TE Connectivity 206305-1 is a threaded circular connector with 37 contacts, rated for 600V. It features polyethylene insulator, UL flammability code of 94V-0, and operates b/w -55 to 105°C. Ideal for applications requiring a male plug connector with crimp termination in cable mounting setups.
HDP24-18-6PN
TE Connectivity's HDP24-18-6PN is a circular connector with 6 contacts, rated at 250V and 100A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55°C to 125°C. Ideal for applications requiring a polarized male connector with solid backshell, such as panel mounting in high current environments.
224064-E
TE Connectivity's 224064-E circular connector has a max operating temp of 85°C and -25°C min, with 5 contacts and rated current of 4A. It is a female receptacle with surface mount termination, ideal for board mounting applications.
HDP24-18-6PN-L024
TE Connectivity's HDP24-18-6PN-L024 circular connector features a body size of 1.635" x 1.75" x 1.625", UL flammability rating of 94V-0, and rated current of 100A. Ideal for applications requiring a male contact gender, with a max operating temperature of 125°C and insulation diameter of 0.1".
UTS71419P
Souriau-sunbank Connection Technologies
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
206226-1
TE Connectivity 206226-1 is a threaded circular connector with 600V rated voltage and 32A signal current. It has glass-filled polyamide66 insulator, UL94V-0 flammability code, and operates b/w -55 to 105°C. Ideal for cable mounting applications, mating info is 206136-1 with one male contact in a plug shell style.
6-2399606-8
TE Connectivity 6-2399606-8 is a circular connector with rated voltage of 1000V and operating temperature range from -40 to 140°C. It has UL flammability rating of 94V-0, polarization key for secure connection, and can handle signal current up to 500A. Ideal for panel mounting applications requiring high power male connectors.
208492-1
TE Connectivity 208492-1 is a threaded circular connector with 28 contacts, rated for 250V and 8A. It features a nickel finish, polyethylene insulator, and operates b/w -55 to 105°C. Ideal for applications requiring secure signal connections in harsh environments.
FFA.2S.304.CLAC82Z
Lemo Usa
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
HR10A-10R-12SB(71)
Hirose Electric
HR10A-10R-12SB(71) by Hirose Electric is a circular connector with 12 contacts, silver termination finish, and snap coupling type. It features a nickel-plated shell, solid backshell, and solder termination. Ideal for board and panel mounting applications requiring a female receptacle connector with zinc alloy and brass shell materials.
ZPEK-1624-371PN
ZPEK-1624-371PN by Amphenol is a threaded circular connector with 37 contacts, aluminum alloy shell, and crimp termination. It is corrosion/moisture resistant, suitable for cable mounting applications. Operating temperature ranges from -55°C to 107°C making it ideal for various industrial environments.
T3260005
Amphenol T3260005 is a threaded circular connector with 3 contacts. It has a nickel shell finish and solid backshell type, made of brass. This connector is commonly used for solder termination in various applications.
21023412419
Harting Electronics & Kg
CIRCULAR CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD;
SR30-10R-6S(71)
CIRCULAR CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Termination Contact Finish: Gold (Au); Mating Contact Finish: NOT SPECIFIED;
1776186-1
TE Connectivity's 1776186-1 is a threaded circular connector with polyamide66 insulator. It operates b/w -40 to 85°C, rated at 1.5A for signal current. Ideal for cable mounting applications requiring a female contact gender and UL flammability code of 94V-0 compliance.
1681169
Phoenix Contact
Phoenix Contact 1681169 is a threaded circular connector with gold contact finish, suitable for cable mounting. Featuring 4 contacts, polyamide shell material, and solder termination type. Ideal for applications requiring reliable male plug connections like SACC-M8FS-4CON-M mating info.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HR10A-7P-6S(73)
HR10A-7P-6S(73) by Hirose Electric is a circular connector with 6 contacts, matte tin finish, and polyamide insulator. With a body diameter of 0.453 inch and shell size of 7, it is ideal for cable mounting applications. Featuring corrosion-resistant properties and a temperature range from -25 to 85°C, this connector is suitable for various industrial environments.
HR10A-10P-12S(73)
HR10A-10P-12S(73) by Hirose Electric is a circular connector with 12 contacts, rated at 2A signal current. It features a dielectric voltage of 300VAC, insulation resistance of 1Gohm, and operates b/w -25 to 85°C. Ideal for cable mounting applications requiring durability up to 1000 cycles.
HR10A-10P-10P(73)
HR10A-10P-10P(73) by Hirose Electric is a circular connector with 10 contacts, silver contact finish, and nickel-plated shell. It features snap coupling type and solid backshell for secure connections. Ideal for cable mounting applications in various industries requiring reliable male plug connectors.
HR10A-10P-10S(73)
HR10A-10P-10S(73) by Hirose Electric is a circular connector with 10 contacts, silver contact finish, and snap coupling type. It is used for cable mounting applications requiring a female plug with solid backshell and nickel-plated zinc alloy/brass shell material.
HR10A-13P-20S(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
HR10A-10R-12P(74)
HR10A-10R-12P(74) by Hirose Electric is a circular connector with 12 contacts, gold contact finish, and snap coupling type. Ideal for panel mounting applications, it features a nickel-plated shell made of zinc alloy and brass. Termination is solder-based, suitable for male connectors in receptacle style shells.
HR10A-10TPA-12S(73)
HR10A-10TPA-12S(73) by Hirose Electric is a circular connector with 12 contacts, silver termination finish, and threaded coupling. It is commonly used in applications requiring a female contact gender, solder termination, and a plug body style.
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Backshell Type: SOLID; Mixed Contacts: NO; Empty Shell: NO;
HR10A-10J-10P(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; IEC Conformity: NO; Filter Feature: NO;
HR10-7P-4P(73)
HR10-7P-4P(73) by Hirose Electric is a circular connector with gold termination, rated for 2A signal current. With 4 contacts and durable zinc alloy body, it's ideal for commercial applications requiring reliable connections in temperatures ranging from -25 to 85°C. The snap coupling type and solder lug termination make it suitable for cable mounting with a solid backshell design.
HR10A-10P-12P(73)
HR10A-10P-12P(73) by Hirose Electric is a circular connector with 12 contacts, rated at 2A signal current. It features a dielectric voltage of 300VAC and insulation resistance of 1Gohm. With a shell made of zinc alloy and brass, it is ideal for commercial applications requiring durability and reliability in temperatures ranging from -25 to 85°C.
HR10-7P-4S(73)
HR10-7P-4S(73) by Hirose Electric is a circular connector with 4 gold-plated contacts, SNAP coupling type, and nickel-plated shell. Ideal for cable mounting applications in industries requiring reliable female connectors. Made of zinc alloy and brass with a solid backshell design, suitable for plug-style connections in size 7 shells.
HR10A-7P-6SC(73)
HR10A-7P-6SC(73) by Hirose Electric is a circular connector with 6 contacts, rated at 2A signal current. It features a nickel-plated shell, zinc alloy and brass construction, and crimp termination. With a durability of 1000 cycles, it is ideal for commercial applications requiring reliable signal transmission in temperatures ranging from -25°C to 85°C.
HR10-7P-6S(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; MIL Conformity: NO; Backshell Type: SOLID;
HR10A-10P-12SC(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 300VAC; Termination Contact Finish: NOT APPLICABLE;
HR10A-10P-12S(74)
CIRCULAR CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: GOLD; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
HR10A-7R-6SC(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Backshell Type: SOLID; Additional Features: POLARIZED;
HR10A-7P-6P(73)
HR10A-7P-6P(73) by Hirose Electric is a circular connector with 6 contacts, gold termination finish, and 300VAC dielectric voltage. It is used in applications requiring a durable connector with polarization key, solder termination, and solid backshell for cable mounting. With a temperature range of -25 to 85°C, it offers reliable signal current up to 2A for commercial use.
HR10-10P-12S(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: CABLE; Body or Shell Style: PLUG;
HR10A-10J-10SC(73)
HR10A-10J-10SC(73) by Hirose Electric is a SNAP circular connector with 10 contacts, nickel plated finish, and solid backshell. Ideal for cable mounting applications, it features zinc alloy & brass shell material, crimp termination type, and female contact gender.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved