Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DF13-20DS-1.25C(80) by Hirose Electric is a 20-contact board connector with 0.049" pitch, suitable for commercial applications. It features 500VAC dielectric voltage, 30mohm contact resistance, and POLYAMIDE insulation material. Ideal for cable mounting with crimp termination, it operates b/w -35 to 85°C temperature range.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Ampacity Inc.
$1.500
Aztec Data Supply Inc.
$2.890
Corohmni
$6.140
Advanced Electronics
$7.763
$7.375
Semicontronic
$10.500
$10.238
$10.185
AZTECH Wire
$14.766
Argo Parts USA
Continental Prestige Electronics
Bastille Electronics
The close contact pitch allows for efficient signal transmission, making this connector suitable for high-performance applications.
The compact body length saves space and allows for a streamlined design in tight spaces or densely populated PCBs.
High insulation resistance ensures reliable signal integrity and minimizes the risk of short circuits or signal interference.
The slim body width facilitates easy installation and allows for a higher density of connectors on a board.
The high dielectric voltage rating ensures safety and reliability in electrical applications, providing protection against voltage surges.
The wide operating temperature range allows for use in various environments, from cold to hot conditions.
Polyamide is a durable and heat-resistant material, providing excellent insulation properties and ensuring the longevity of the connector.
The high maximum operating temperature allows for reliable performance in demanding conditions without risking damage to the connector.
Having multiple rows loaded enables the connector to accommodate more contacts, increasing its versatility and functionality.
The UL 94V-0 flammability rating indicates that the connector meets strict safety standards and is resistant to fire hazards.
The high rated current capacity allows the connector to handle robust signal transmission without overheating or degradation.
The polarization key ensures proper alignment during mating, preventing incorrect connections and potential damage to the connector.
Having a high number of contacts increases the connector's versatility and allows for the transmission of multiple signals or data streams.
Supporting small wire sizes enables the connector to be used with a wide range of applications, from delicate electronics to larger wire gauges.
With a durability of 30 cycles, the connector can withstand multiple mating and unmating cycles, ensuring long-lasting performance.
The cable mounting type offers flexibility in installation and allows for easy connectivity with various cable types.
Crimp termination provides a reliable and secure connection method, ensuring stable signal transmission and preventing intermittent connections.
The female contact gender is commonly used for receptacles, allowing for the insertion of male contacts and ensuring compatibility with standard connectors.
The square pin socket contact style provides a secure and stable connection, minimizing the risk of signal loss or poor contact.
The commercial-grade reliability ensures consistent performance in commercial applications, meeting industry standards for quality and durability.
Headers & Edge Type Connectors DF13-20DS-1.25C(80) attributes and parameters. Explore more Headers & Edge Type Connectors devices from Hirose Electric
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Gender:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
Minimum Withdrawal Force (N):
DF13-20DS-1.25C(80) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Hirose Electric Co., Ltd. is a Japanese company specializing in the manufacturing of electric connectors. The company was founded in 1937 as Hirose Manufacturing, changed its name to Hirose Electric in August 1963 and started selling internationally in 1968. Hirose also manufactures flexible printed circuits for smartphones and gets about 70 percent of revenue from outside Japan.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
Transys Electronics
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SPC TECHNOLOGY/ MULTICOMP
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
VHR-3N
J S T Mfg
VHR-3N by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.156" pitch, POLYAMIDE insulator, and 1500VAC dielectric voltage. Ideal for cable mounting applications, it has a temperature range of -25 to 85 °C and UL94V-0 flammability rating.
SM10B-SRSS-TB(LF)(SN)
SM10B-SRSS-TB(LF)(SN) by J S T Mfg is a 10-contact board connector with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCBs, it features tin over copper finish, POLYAMIDE insulator, and operates b/w -25 to 85 °C.
MM70-314B1-2-R300
Japan Aviation Electronics Industry
MM70-314B1-2-R300 by Japan Aviation Electronics features a mating contact pitch of 0.02", insulator made of glass-filled liquid crystal polymer, and total 314 contacts. It is a card edge connector with UL flammability code 94V-0, suitable for board mounting applications requiring right angle mounting style and surface mount termination type.
929665-04-31-EU
3m Electronic Products Division
929665-04-31-EU by 3M Electronic Products Division is a BOARD CONNECTOR with Gold (Au) - Nickel (Ni) finish, 62 contacts in 2 rows. It has a terminal pitch of 2.54mm and is ideal for applications requiring high-quality male connectors with solder termination on boards.
TSW-104-07-G-S
Samtec
Samtec TSW-104-07-G-S is a 4-contact board connector with gold over nickel finish. Featuring a mating contact pitch of 0.1", it has a body length of 0.4" and width of 0.098". Ideal for commercial applications, this male connector operates b/w -55°C to 125°C, meeting UL standards.
357-074-422-278
Edac
Edac 357-074-422-278 is a Card Edge Connector with 74 contacts, 0.156" pitch, and 5A signal rating. It has a dielectric voltage of 2545VAC and operates b/w -40 to 105°C. Ideal for board and panel mounting applications requiring high insulation resistance and UL certification.
53261-0771
Molex
Molex 53261-0771 is a board connector with a mating contact pitch of 0.049". It has a body length of 0.531" and insulation resistance of 100000000 ohm. This connector is commonly used in commercial applications requiring a surface mount termination type.
GHR-05V-S
GHR-05V-S by J S T Mfg is a 5-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure electrical connections in compact spaces.
7-215079-6
TE Connectivity
TE Connectivity 7-215079-6: Headers & Edge Type Connectors with 0.05" pitch, 1A signal current rating, and GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. Ideal for board mounting applications in commercial settings due to its durability and UL Flammability Code of 94V-0.
PHR-2
PHR-2 by J S T Mfg is a 2-contact BOARD CONNECTOR with 0.079" pitch, 800VAC voltage withstand, and 1000000000 ohm insulation resistance. It features POLYAMIDE66 insulator for -25 to 85 °C operation. Ideal for CABLE mounting in applications requiring FEMALE contact gender and CRIMP termination.
S4B-PH-SM4-TB(LF)(SN)
S4B-PH-SM4-TB(LF)(SN) by J S T Mfg is a 4-contact board connector with mating pitch of 0.079". It features tin copper termination, polyamide6T insulator, and right angle mounting style. Ideal for applications requiring surface mount connectors with male contact gender and rectangular contact pattern.
SQT-120-01-F-D
SQT-120-01-F-D by Samtec is a 40-contact board connector with a contact pitch of 0.079". It features a matte tin finish, liquid crystal polymer insulator, and gold flash over nickel mating contacts. Ideal for applications requiring high durability and reliability in commercial settings.
DF11-18DP-2DSA(01)
Hirose Electric
DF11-18DP-2DSA(01) by Hirose Electric is a 2-row, 18-contact board connector with gold termination finish. It offers a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for applications requiring durability, reliability, and signal current rating up to 2A in commercial settings.
DTM04-2P-E003
DTM04-2P-E003 by TE Connectivity is a 1.68" x 0.651" x 0.638" board connector with GLASS FILLED POLYAMIDE insulator material. It has a rated voltage of 250V and can operate in temperatures ranging from -55 to 125°C. This male connector with one port and two contacts is suitable for cable mounting applications.
5-826629-0
TE Connectivity 5-826629-0 is a BOARD CONNECTOR with 50 contacts, rated at 5A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 5000000000 ohm and operates b/w -65 to 105 °C. Ideal for commercial applications, this connector offers durability up to 150 cycles and uses SOLDER termination.
54104-4031
Molex 54104-4031 is a FFC/FPC connector with 40 contacts, 0.020" pitch, and gold termination finish. Ideal for board mounting applications with a temperature range of -20 to 85°C. Features include polyamide insulator, 250VAC voltage rating, and UL94V-0 flammability code.
640456-2
TE Connectivity 640456-2 is a BOARD CONNECTOR with 0.1" pitch, suitable for commercial applications. Features BRASS contacts, TIN finish, and GLASS FILLED POLYESTER insulator material. Rated for 5A signal current with operating temperatures from -55 to 105°C.
BM04B-GHS-TBT(LF)(SN)(N)
BM04B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, 0.049" pitch, and 100000000 ohm insulation resistance. It has POLYAMIDE9T insulator material, operates b/w -25 to 85 °C, and features TIN/CU termination finish. Ideal for applications requiring a male contact gender in surface mount configuration with a rectangular PCB contact pattern.
FTSH-110-01-L-DV-K-P
Samtec's FTSH-110-01-L-DV-K-P is a 2-row, 20-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator material and phosphor bronze contacts with gold finish, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount termination on PCBs.
2-1761608-3
TE Connectivity 2-1761608-3 is a board connector with 10 contacts, dual polarization, and solder termination. It has a mating contact pitch of 0.1 inch and operates b/w -65 to 105 °C. Ideal for commercial applications requiring a reliable male plug with straight mounting and blue insulator color.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DF13-8S-1.25C
DF13-8S-1.25C by Hirose Electric is a 8-contact board connector with 0.049" pitch, rated at 1A signal current. It features polyamide insulation, withstands up to 500VAC, and operates b/w -35°C to 85°C. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
DF13-4S-1.25C
DF13-4S-1.25C by Hirose Electric is a 4-contact board connector with 0.049" pitch, rated for 1A signal current. Featuring polyamide insulation and UL94V-0 flammability, it operates b/w -35°C to 85°C. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
DF13-2S-1.25C
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
DF13-3S-1.25C
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
DF13-20DS-1.25C
DF13-4P-1.25DSA(76)
DF13-4P-1.25DSA(76) by Hirose Electric is a 4-contact male board connector with gold finish, UL 94V-0 flammability rating, and solder termination. It has a terminal pitch of 1.25mm and straight mounting style. Ideal for applications requiring reliable board-to-board connections in electronic devices.
DF13-4P-1.25DSA
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED;
DF13-6S-1.25C
DF13-8S-1.25C(40)
DF13-8S-1.25C(40) by Hirose Electric is a 8-contact board connector with matte tin finish, copper alloy contacts, and UL 94V-0 flammability rating. It is used for cable mounting applications requiring crimp termination, featuring female contact gender and socket body style.
DF13-8S-1.25C(41)
DF13-8S-1.25C(41) by Hirose Electric is a 8-contact board connector with matte tin finish. It features copper alloy contacts, UL 94V-0 flammability rating, and crimp termination. Ideal for cable mounting applications requiring female socket connectors.
DF13-4P-1.25DSA(05)
DF13-4P-1.25DSA(05) by Hirose Electric is a 4-pin board connector with a mating contact pitch of 0.049 inches and insulation resistance of 500MΩ. It is commonly used in applications requiring a straight mounting style and solder termination, such as PCB connections in electronic devices.
DF13-4P-1.25DSA(25)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Mounting Type: BOARD;
DF13-2S-1.25C(40)
DF13-2S-1.25C(40) by Hirose Electric is a 2-contact BOARD CONNECTOR with TIN/GOLD finish, UL 94V-0 rated. It features FEMALE contacts for CABLE mounting via CRIMP termination. Ideal for applications requiring SOCKET-style connectors in electronics and telecommunications industries.
DF13-4P-1.25DSA(55)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Termination Type: SOLDER;
DF13-2P-1.25DSA
DF13-2P-1.25DSA by Hirose Electric is a 2-contact board connector with 0.049" pitch, suitable for commercial applications. Featuring TIN finish, it offers 500000000 ohm insulation resistance and 30 mohm contact resistance. Ideal for PCB mounting with POLYAMIDE insulator material and UL94V-0 flammability rating.
DF13-3S-1.25C(40)
DF13-3S-1.25C(40) by Hirose Electric is a 3-contact board connector with matte tin finish, copper alloy contacts, and UL 94V-0 flammability rating. It is used for cable mounting applications requiring crimp termination, featuring female contact gender and socket body style.
DF13-2S-1.25C(41)
DF13-2S-1.25C(41) by Hirose Electric is a BOARD CONNECTOR with 2 FEMALE contacts, TIN/GOLD finish. It has UL 94V-0 flammability rating and CRIMP termination. Ideal for CABLE mounting applications requiring SOCKET style connectors.
DF13-3S-1.25C(41)
DF13-3S-1.25C(41) by Hirose Electric is a 3-contact board connector with matte tin finish, copper alloy contacts, and UL 94V-0 flammability rating. It is used for cable mounting applications requiring crimp termination, ideal for sockets in various electronic devices.
DF13-20DS-1.25C(09)
DF13-20DS-1.25C(09) by Hirose Electric is a 20-contact board connector with 0.049" pitch, suitable for cables with 26-32 AWG wires. It features a polarization key, UL94V-0 flammability rating, and polyamide insulation material. Ideal for applications requiring a durable socket-style connector with a rated current of 1A and operating temperatures ranging from -35 to 85°C.
DF13-20DS-1.25C(40)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Maximum Wire Size: 26 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved