Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DF13-4P-1.25DSA(05) by Hirose Electric is a 4-pin board connector with a mating contact pitch of 0.049 inches and insulation resistance of 500MΩ. It is commonly used in applications requiring a straight mounting style and solder termination, such as PCB connections in electronic devices.
Median Price
$0.278
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$0.241
100+ parts
-
1k+ parts
$0.201
10k+ parts
$0.205
Interstate Connecting
$0.242
$0.217
DigiKey
$0.440
$0.317
$0.269
$0.229
Mouser Electronics
$0.316
$0.263
$0.223
Future Electronics
$0.220
$0.215
$0.200
Newark
$0.353
$0.300
$0.260
Chip1Stop
$0.265
Nova Conductors
$0.206
Vyrian
Continental Prestige Electronics
$0.202
Argo Parts USA
Bastille Electronics
$0.196
$0.186
$0.183
Semicontronic
$0.216
Ampacity Inc.
Corohmni
$5.912
Aztec Data Supply Inc.
$8.610
Advanced Electronics
$10.204
$9.694
Abacus Technologies
The low mating contact pitch allows for high-density connections, making this product suitable for applications where space is limited.
The compact body length helps conserve space on the PCB while still providing a reliable connection.
The high insulation resistance ensures minimal signal loss and interference, making this product ideal for high-performance applications.
The high dielectric withstanding voltage provides added safety and reliability in applications where electrical insulation is critical.
The gold termination contact finish offers excellent conductivity and corrosion resistance, ensuring a long-lasting and high-quality connection.
The high maximum operating temperature allows for use in a wide range of environments, making this product versatile and reliable.
The UL 94V-0 flammability rating ensures that this product meets stringent safety standards, making it a reliable choice for various applications.
The high rated current allows for the transmission of signals with minimal risk of overheating, making this product suitable for demanding electronic applications.
The durability of 30 cycles ensures a long service life and reliable connections, making this product a cost-effective choice for applications requiring frequent mating and unmating.
Headers & Edge Type Connectors DF13-4P-1.25DSA(05) attributes and parameters. Explore more Headers & Edge Type Connectors devices from Hirose Electric
Body Width:
Body Depth:
Body Length:
Connector Type:
Termination Contact Finish:
Contact Gender:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DF13-4P-1.25DSA(05) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Hirose Electric Co., Ltd. is a Japanese company specializing in the manufacturing of electric connectors. The company was founded in 1937 as Hirose Manufacturing, changed its name to Hirose Electric in August 1963 and started selling internationally in 1968. Hirose also manufactures flexible printed circuits for smartphones and gets about 70 percent of revenue from outside Japan.
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Frontier Electronics
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
S4B-PH-SM4-TB(LF)(SN)
J S T Mfg
S4B-PH-SM4-TB(LF)(SN) by J S T Mfg is a 4-contact board connector with mating pitch of 0.079". It features tin copper termination, polyamide6T insulator, and right angle mounting style. Ideal for applications requiring surface mount connectors with male contact gender and rectangular contact pattern.
DT06-6S-EP06
TE Connectivity's DT06-6S-EP06 is a 2-row board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this polarized connector has a total of 6 contacts and UL certification.
BM02B-SRSS-TBT(LF)(SN)
BM02B-SRSS-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with COPPER ALLOY contacts, TIN finish, and 94V-0 UL rating. It has 2 contacts for SURFACE mounting, ideal for electronic devices requiring reliable male connectors in STRAIGHT configuration.
DF40HC(3.0)-100DS-0.4V(51)
Hirose Electric
DF40HC(3.0)-100DS-0.4V(51) by Hirose Electric is a 2-row stacking connector with 100 contacts, gold-plated for durability and signal current up to 0.3A. Featuring liquid crystal polymer insulation, it offers high dielectric voltage of 100VAC and operates b/w -35°C to 85°C. Ideal for board mounting applications requiring reliable female connectors with bellowed contact style and locking option.
14-56-4045
Molex
The Molex 14-56-4045 is a board connector with 0.1" mating contact pitch, gold termination finish, and 600VAC dielectric voltage. Ideal for commercial applications, it has a black insulator color, UL flammability rating of 94V-0, and operates b/w -40 to 120°C.
SHR-14V-S-B
SHR-14V-S-B by J S T Mfg is a 14-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
DT06-3S-P006
TE Connectivity's DT06-3S-P006 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and measures 1.228" x 0.737" x 0.94".
5055960401
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
7-188275-4
TE Connectivity 7-188275-4 is a FFC/FPC connector with 0.05" contact pitch, rated for 1.5A signal current at 100V. With POLYAMIDE46 insulator and UL94V-0 flammability rating, it's ideal for board mounting applications requiring high reliability in commercial settings.
09061486901
Harting Electronics & Kg
09061486901 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.2", Insulation Resistance of 1TΩ, and Dielectric Withstanding Voltage of 1550VAC. Ideal for board connections in applications requiring durability, reliability, and high current signal transmission at temperatures ranging from -65 to 125°C.
BM03B-SRSS-TB(LF)(SN)(P)
BM03B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 0.039" pitch, 0.197" body length, and 100000000 ohm insulation resistance. It operates b/w -25 to 85 °C, has a dielectric voltage of 500VAC, and features POLARIZED HOUSING for applications requiring high signal current in PCB mounting setups.
47054-1000
The Molex 47054-1000 is a board connector with 4 contacts, 0.1" pitch, and 1500VAC dielectric voltage. It has a 0.425" body length, 0.229" width, and 0.5" depth. Ideal for commercial applications requiring a durable header connector with crimp termination and polarized housing.
3000
3m Electronic Products Division
The 3m Electronic Products Division's mfgpartno 3000 is a BOARD CONNECTOR with UL Flammability Code 94V-0. It features Terminal Pitch of 2.54mm and SOLDER Termination Type, suitable for applications requiring RIGHT ANGLE or STRAIGHT Mounting Style.
5-146281-2
TE Connectivity 5-146281-2 is a board connector with mating contact pitch of 0.1". Featuring matte tin finish, it has insulation resistance of 5000000000 ohm and operates b/w -65 to 105 °C. Ideal for commercial applications, this male connector has a rated current of 3A and UL flammability rating of 94V-0.
52271-1679
The Molex 52271-1679 is a FFC/FPC connector with 16 contacts, rated at 0.5A signal current. It has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 750VAC. Ideal for board mounting applications, it features a polyamide insulator material and operates b/w -40 to 85°C temperature range.
1-640456-5
TE Connectivity 1-640456-5 is a 15-contact board connector with 0.1" pitch, TIN finish, and UL94V-0 flammability rating. Ideal for commercial applications, it features a 5A signal current rating and operates b/w -55°C to 105°C temperature range.
61300511121
Wuerth Elektronik & Kg
61300511121 by Wurth Elektronik is a BOARD CONNECTOR with 5 contacts, rated for 3A signal current. Featuring a mating contact pitch of 0.1", it has gold over nickel termination finish and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs.
2-5767004-2
TE Connectivity 2-5767004-2 is a board stacking connector with 39 contacts, rated at 11.5A for signal current. It features a mating contact pitch of 0.025", insulation resistance of 2M ohm, and dielectric voltage withstand of 500VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 125°C.
TMM-106-01-L-S
Samtec
The Samtec TMM-106-01-L-S is a board connector with 6 contacts, featuring a mating contact pitch of 0.079", matte tin termination finish, and phosphor bronze contact material. It has a max operating temperature of 125°C and min of -55°C, making it suitable for commercial applications requiring reliable signal transmission on PCBs with rectangular contact patterns.
53048-0210
Molex 53048-0210 is a board connector with 2 contacts, 0.049" pitch, and TIN finish. It has a polyamide insulator, operates b/w -40 to 85°C, and features right-angle mounting. Ideal for commercial applications requiring reliable male connectors with rectangular contact pattern.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DF13-8S-1.25C
DF13-8S-1.25C by Hirose Electric is a 8-contact board connector with 0.049" pitch, rated at 1A signal current. It features polyamide insulation, withstands up to 500VAC, and operates b/w -35°C to 85°C. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
DF13-4S-1.25C
DF13-4S-1.25C by Hirose Electric is a 4-contact board connector with 0.049" pitch, rated for 1A signal current. Featuring polyamide insulation and UL94V-0 flammability, it operates b/w -35°C to 85°C. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
DF13-2S-1.25C
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
DF13-3S-1.25C
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
DF13-20DS-1.25C
DF13-4P-1.25DSA(76)
DF13-4P-1.25DSA(76) by Hirose Electric is a 4-contact male board connector with gold finish, UL 94V-0 flammability rating, and solder termination. It has a terminal pitch of 1.25mm and straight mounting style. Ideal for applications requiring reliable board-to-board connections in electronic devices.
DF13-4P-1.25DSA
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED;
DF13-6S-1.25C
DF13-8S-1.25C(40)
DF13-8S-1.25C(40) by Hirose Electric is a 8-contact board connector with matte tin finish, copper alloy contacts, and UL 94V-0 flammability rating. It is used for cable mounting applications requiring crimp termination, featuring female contact gender and socket body style.
DF13-8S-1.25C(41)
DF13-8S-1.25C(41) by Hirose Electric is a 8-contact board connector with matte tin finish. It features copper alloy contacts, UL 94V-0 flammability rating, and crimp termination. Ideal for cable mounting applications requiring female socket connectors.
DF13-4P-1.25DSA(25)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Mounting Type: BOARD;
DF13-20DS-1.25C(80)
DF13-20DS-1.25C(80) by Hirose Electric is a 20-contact board connector with 0.049" pitch, suitable for commercial applications. It features 500VAC dielectric voltage, 30mohm contact resistance, and POLYAMIDE insulation material. Ideal for cable mounting with crimp termination, it operates b/w -35 to 85°C temperature range.
DF13-2S-1.25C(40)
DF13-2S-1.25C(40) by Hirose Electric is a 2-contact BOARD CONNECTOR with TIN/GOLD finish, UL 94V-0 rated. It features FEMALE contacts for CABLE mounting via CRIMP termination. Ideal for applications requiring SOCKET-style connectors in electronics and telecommunications industries.
DF13-4P-1.25DSA(55)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Termination Type: SOLDER;
DF13-2P-1.25DSA
DF13-2P-1.25DSA by Hirose Electric is a 2-contact board connector with 0.049" pitch, suitable for commercial applications. Featuring TIN finish, it offers 500000000 ohm insulation resistance and 30 mohm contact resistance. Ideal for PCB mounting with POLYAMIDE insulator material and UL94V-0 flammability rating.
DF13-3S-1.25C(40)
DF13-3S-1.25C(40) by Hirose Electric is a 3-contact board connector with matte tin finish, copper alloy contacts, and UL 94V-0 flammability rating. It is used for cable mounting applications requiring crimp termination, featuring female contact gender and socket body style.
DF13-2S-1.25C(41)
DF13-2S-1.25C(41) by Hirose Electric is a BOARD CONNECTOR with 2 FEMALE contacts, TIN/GOLD finish. It has UL 94V-0 flammability rating and CRIMP termination. Ideal for CABLE mounting applications requiring SOCKET style connectors.
DF13-3S-1.25C(41)
DF13-3S-1.25C(41) by Hirose Electric is a 3-contact board connector with matte tin finish, copper alloy contacts, and UL 94V-0 flammability rating. It is used for cable mounting applications requiring crimp termination, ideal for sockets in various electronic devices.
DF13-20DS-1.25C(09)
DF13-20DS-1.25C(09) by Hirose Electric is a 20-contact board connector with 0.049" pitch, suitable for cables with 26-32 AWG wires. It features a polarization key, UL94V-0 flammability rating, and polyamide insulation material. Ideal for applications requiring a durable socket-style connector with a rated current of 1A and operating temperatures ranging from -35 to 85°C.
DF13-4P-1.25DS(20)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; DIN Conformance: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved