Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; No. of Functions: 2; Maximum Rated Current: 62.1 A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Fixed Inductors 33454 attributes and parameters. Explore more Fixed Inductors devices from Hirel Systems
Inductor Type:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Special Feature:
Manufacturer Series:
Package Shape:
Shielded:
Surface Mounted:
Terminal Position:
Terminal Shape:
No. of Terminals:
33454 Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
NSN
2540-00-352-4534, 2540003524534, 2530-99-800-3880, 2530998003880, 2990-00-457-6658, 2990004576658, 4820-01-422-7248, 4820014227248, 4820-01-422-7209, 4820014227209, 4820-01-422-7246, 4820014227246, 5331-00-111-3747, 5331001113747, 5340-00-709-2018, 5340007092018, 4820-01-422-7204, 4820014227204, 5999-14-426-9275, 5999144269275
NIIN
003524534, 998003880, 004576658, 014227248, 014227209, 014227246, 001113747, 007092018, 014227204, 144269275
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitronic Enterprise
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
General Semiconductor
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Vishay Telefunken
U06-7
Torotel Products
GENERAL PURPOSE INDUCTOR; Inductor Application: FILTER CHOKE; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Minimum Operating Temperature: -55 Cel;
B82792C2474N315
TDK
B82792C2474N315 by TDK is a surface mount fixed inductor with 470uH nominal inductance, 0.6A max rated current, and 0.25 ohm DC resistance. Ideal for general purpose applications, this rectangular package inductor has 8 terminals and uses ferrite core material.
LQW15AN2N5C00D
Murata Manufacturing
LQW15AN2N5C00D by Murata is a wirewound chip inductor with 0.0025 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 15000 MHz. With dual-ended terminals and matte tin finish, it offers high quality factor at 250 MHz test frequency.
DR74-4R7-R
Eaton Corporation
DR74-4R7-R by Eaton Corp is a fixed inductor with 4.7uH nominal inductance, 3.34A max current, and -40 to 125°C operating temp range. It's a shielded SMT inductor for power applications, featuring dual-ended terminals and ferrite core material.
B82791H2301N001
B82791H2301N001 by TDK is a fixed inductor with 30000 uH nominal inductance, 2.2 ohm DC resistance, and 0.3 A max rated current. It is a power inductor designed for general purpose applications, featuring a rectangular package style for PCB mount with dual in-line terminals. Operating temperature ranges from -40 to 125 °C.
74477110
Wuerth Elektronik & Kg
Wurth Elektronik 74477110 is a shielded fixed inductor with dual-ended terminals. It has a nominal inductance of 10uH, max rated current of 5A, and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a ferrite core and WRAPAROUND terminal shape.
744042100
Wurth Elektronik 744042100 is a shielded SMT inductor with 10uH nominal inductance, 1.3A max current, and 45MHz self-resonance freq. Ideal for power applications due to its compact rectangular package design and high temp range (-40°C to 125°C).
LQH43CN220K03L
Murata Manufacturing's LQH43CN220K03L is a surface mount fixed inductor with 22uH nominal inductance, 0.6 ohm DC resistance, and 15 MHz self-resonance frequency. Ideal for RF applications, this general purpose inductor has dual-ended terminals and operates b/w -40°C to 85°C.
IHLP2020CZER4R7M11
Vishay Intertechnology's IHLP2020CZER4R7M11 is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 5.1A max rated current. Ideal for high current applications, this general purpose inductor has a self-resonance frequency of 25MHz and operates b/w -55°C to 125°C.
768772222
Wurth Elektronik 768772222 is a radial fixed inductor with 2200 uH nominal inductance, suitable for RF applications. Featuring 0.7 mm lead diameter and 5 mm lead spacing, it has a max operating temperature of 125 °C and self-resonance frequency of 1.2 MHz. Ideal for general purpose use due to its cylindrical package design and ferrite core material.
DRA124-8R2-R
DRA124-8R2-R by Eaton Corp is a shielded fixed inductor with 8.2uH nominal inductance, ideal for general purpose applications. With a max operating temp of 165°C and rated current of 6.7A, it offers reliable performance in various electronic circuits requiring high-quality components.
NRS4018T220MDGJ8
Taiyo Yuden
NRS4018T220MDGJ8 by Taiyo Yuden is a fixed inductor with 22uH nominal inductance, 0.29 ohm DC resistance, and 15 MHz self-resonance frequency. It is a power inductor designed for general purpose applications, featuring dual-ended terminals and shielded construction. Ideal for SMT mounting with a compact size of 4x4x1.8mm, it operates b/w -40°C to 125°C with a max rated current of 0.72A.
#636CY-220M=P3
Murata Manufacturing's #636CY-220M=P3 is a shielded, surface mount inductor with 22uH nominal inductance and 0.9A max rated current. Ideal for DC-DC converters, it features ferrite core material, dual-ended terminals, and cylindrical package shape.
SLF10145T-102MR29-PF
SLF10145T-102MR29-PF by TDK is a shielded, dual-ended fixed inductor with 1000uH nominal inductance. Ideal for power applications, it has a max rated current of 0.29A and operates b/w -40 to 105°C. Its compact SMT package measures 10.1mm x 10.1mm x 4.5mm, making it suitable for various general-purpose inductor needs.
XFL4020-102MEB
Coilcraft
Coilcraft XFL4020-102MEB is a shielded, surface mount inductor with 1uH nominal inductance and 11A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 64MHz.
SRU5016-101Y
Bourns
Bourns SRU5016-101Y is a shielded SMT inductor with 100uH nominal inductance, 0.85 ohm DC resistance, and 30% tolerance. Ideal for power applications, it operates b/w -40 to 125°C with a max rated current of 0.3A.
5714
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Terminal Placement: RADIAL;
B82498F3331J000
The TDK B82498F3331J000 is a surface mount fixed inductor with 0.33uH nominal inductance, 1.5 ohm DC resistance, and 800 MHz self-resonance frequency. Ideal for RF applications, this general purpose inductor has dual-ended terminals and operates b/w -55 to 125 °C.
36502AR47JTDG
TE Connectivity's 36502AR47JTDG is an 0805 SMT fixed inductor with 0.47uH nominal inductance, suitable for RF applications. With a max operating temperature of 125°C and rated current of 0.22A, it offers a min quality factor of 33 at L-nom. Its dual-ended terminal placement and rectangular shape make it ideal for general purpose inductor needs.
B82111B0000C021
The TDK B82111B0000C021 is a fixed inductor with 5uH nominal inductance, 10A max current, and 175MHz self-resonance freq. Ideal for RF applications due to its tubular construction, axial lead placement, and ferrite core material. Operating temp range from -55°C to 125°C makes it suitable for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Hirel Systems
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved