Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
09031426901 by Harting Electronics & Kg is a board euro connector with 48 contacts, 3 rows loaded (A,B,C), and polarization key for polarized housing. It has gold over nickel termination finish, glass filled polyethylene insulator material, and operates b/w -65 to 125 °C. Ideal for commercial applications requiring reliable signal current of 2A with DIN conformance.
Median Price
$11.840
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Verical
1+ parts
$8.806
100+ parts
$7.679
1k+ parts
$6.699
10k+ parts
-
Arrow
$10.784
$8.174
$6.091
Mouser Electronics
$11.690
$9.030
$7.400
Newark
$11.990
$8.630
$8.340
DigiKey
$12.060
$8.714
$7.409
Element14
$14.970
$14.080
Vyrian
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
A&K Electronics
Rotakorn
Bristol Electronics
Semicontronic
$5.500
$5.362
$5.335
Netroflash
$7.074
$6.932
Continental Prestige Electronics
$8.940
$5.760
Neutron USA
$39.990
Argo Parts USA
Corohmni
Glotronic Ltd.
Perfect Parts
The tight contact pitch allows for precise connections, ensuring reliable and secure mating of the connectors.
The long body provides space for multiple rows of contacts, allowing for greater connectivity in a single connector.
High insulation resistance ensures that the contacts are well isolated, reducing the risk of short circuits and improving overall reliability.
Ability to have mixed contacts in the connector provides versatility in accommodating different types of connections in one unit.
The high dielectric voltage rating allows for safe operation in high voltage environments, ensuring reliable performance.
The UL94V-0 flammability rating signifies that the product meets stringent safety standards for flame resistance, making it a secure choice for various applications.
Standard terminal pitch allows for compatibility with a wide range of PCB layouts and facilitates easy integration into existing designs.
High maximum operating temperature ensures that the connectors can withstand harsh environmental conditions and perform reliably even in elevated temperatures.
Headers & Edge Type Connectors 09031426901 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Harting Electronics & Kg
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Style:
Mounting Type:
Rows Loaded Name:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
09031426901 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
HARTING develops, manufactures and sells electrical and electronic connectors, device terminations, network components as well as cable harnesses for networks or machinery, or for power and data application in factories. Our products are used in mechanical and plant engineering, factory automation, power generation and distribution as well as industrial electronics and telecommunication.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
QSH-030-01-L-D-A
Samtec
Samtec's QSH-030-01-L-D-A is a 2-row board stacking connector with 60 contacts. It features a mating contact pitch of 0.02", insulation resistance of 5G ohm, and dielectric voltage rating of 375VAC. Ideal for applications requiring high durability and reliability in commercial settings, this connector has a temperature range from -55 to 125°C.
307-074-442-278
Edac
Edac 307-074-442-278 is a CARD EDGE CONNECTOR with 74 contacts, 0.156" pitch, and 5A signal rating. It has a dielectric voltage of 2545VAC, operates b/w -40 to 105°C, and features FEMALE contact gender for WIRE WRAP termination.
20021321-00010C4LF
Amphenol Communications Solutions
The Amphenol Communications Solutions 20021321-00010C4LF is a board connector with 10 contacts, rated for 1A signal current. Featuring a mating contact pitch of 0.05", it has a durability of 100 cycles and operates b/w -55°C to 125°C. Ideal for applications requiring high insulation resistance and dielectric voltage withstand capabilities.
BM04B-GHS-TBT(LF)(SN)
J S T Mfg
BM04B-GHS-TBT(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.049" pitch, POLYAMIDE9T insulator, and 500VAC dielectric voltage. Ideal for applications requiring a male connector with surface mount termination, operating b/w -25 to 85 °C, UL-rated for flammability.
MEM2067-02-180-00-A
Global Connector Technology
MEM2067-02-180-00-A by Global Connector Technology is a PCB connector with 8 contacts, mating pitch of 0.04", and termination finish of TIN OVER NICKEL. It features liquid crystal polymer insulator material and is UL certified for use in various applications requiring a right angle mounting style on the board.
HLW12S-2C7LF
HLW12S-2C7LF by Amphenol is a 12-contact FFC/FPC connector with 0.039" mating pitch and tin finish. It is UL 94V-0 rated, suitable for board mounting with solder termination. Ideal for applications requiring straight female connectors in headers & edge type setups.
04T-JWPF-VSLE-S
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO; IEC Conformity: NO; Contact Material: NOT SPECIFIED; MIL Conformity: NO;
S2B-PH-SM4-TB(LF)(SN)
S2B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" mating contact pitch, POLYAMIDE6T insulator material, and -25 to 85°C operating temperature range. Ideal for PCB applications requiring a male connector with RIGHT ANGLE mounting style and SURFACE MOUNT termination type.
B2B-PH-K-S
B2B-PH-K-S by J S T Mfg is a BOARD CONNECTOR with BRASS contacts, 94V-0 UL rating, and TIN OVER COPPER finish. With 2 contacts on 2mm pitch, it's ideal for solder termination in straight mounting applications.
1291
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO; DIN Conformance: NO;
NSHR-03V-S
NSHR-03V-S by J S T Mfg is a 3-contact BOARD CONNECTOR with TIN finish, ideal for CABLE mounting. Made of COPPER ALLOY, it has UL 94V-0 flammability rating and features FEMALE contacts suitable for CRIMP termination.
B4B-ZR(LF)(SN)
B4B-ZR(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 1.5mm and UL Flammability Code of 94V-0. Ideal for board mounting applications requiring male contact gender and solder termination.
50-57-9403
Molex
Molex 50-57-9403 is a board connector with 0.1" pitch, suitable for commercial applications. It features a body length of 0.299", insulation resistance of 10^10 ohm, and operating temperature range from -40 to 105°C. Ideal for use in cable mounting scenarios with crimp termination and female contact gender.
DF11-6DS-2C
Hirose Electric
DF11-6DS-2C by Hirose Electric is a 2-row board connector with 6 contacts, rated at 2A signal current. Featuring a mating contact pitch of 0.079", it has a dielectric voltage of 650VAC and operates b/w -30 to 85°C. Ideal for commercial applications requiring durable connectors with crimp termination and locking mounting option.
FTSH-107-01-L-DV-K-A-P-TR
Samtec's FTSH-107-01-L-DV-K-A-P-TR is a 2-row, 14-contact male board connector with tin finish. Operating from -55 to 125°C, it has a terminal pitch of 1.27mm and mounts on the board surface. Ideal for applications requiring high temperature resistance and secure connections in compact spaces.
53398-0671
Molex 53398-0671 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications, it features a male blade pin-skt contact style and surface mount termination on a straight receptacle body for durability in PCB mounting.
XHP-2-E
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
BM05B-SRSS-TBT(LF)(SN)
BM05B-SRSS-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 5 contacts, COPPER ALLOY material, and TIN finish. It is a STRAIGHT mounting style connector for surface mount applications in headers & edge type connectors category.
1-2199230-6
TE Connectivity
TE Connectivity 1-2199230-6 is a 2-row card edge connector with 0.5" pitch, ideal for board mounting with POLYETHYLENE insulator. Rated at 0.5A, it has 67 contacts and operates b/w -40 to 80°C. Suitable for applications requiring right angle surface mount connectors.
PH-R-10
Morethanall
PH-R-10 by Morethanall is a 10-contact board connector with 0.079" pitch, suitable for commercial applications. Featuring brass contacts with AU finish, it has an insulation resistance of 1G ohm and can withstand up to 800VAC. With a temperature range of -25 to 85°C, this right-angle receptacle connector is ideal for PCB mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
09031646921
Harting Electronics & Kg
BOARD EURO CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Insulation Resistance: 1000000000000 ohm;
09032966825
BOARD EURO CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Additional Features: STANDARD: DIN 41612, PANEL MOUNTABLE;
09031966921222
09031966921222 by Harting Electronics & Kg is a BOARD EURO CONNECTOR with 96 contacts in 3 rows (A,B,C). It features a Mating Contact Pitch of 0.1", Insulation Resistance of 1000000000000 ohm, and operates b/w -55 to 125 °C. Ideal for PCB applications requiring durable, polarized connectors with UL standard compliance.
09031966921
09031966921 by Harting Electronics & Kg is a board euro connector with 96 contacts in 3 rows. It features a mating contact pitch of 0.1", insulation resistance of 1TΩ, and operates b/w -55°C to 125°C. Ideal for commercial applications requiring durable connectors with solder termination and UL certification.
09031786901
09031786901 by Harting Electronics & Kg is a board euro connector with 80 contacts arranged in rows A, B, and C. Featuring a mating contact pitch of 0.1 inch and insulation resistance of 1T ohm, it is ideal for applications requiring a max operating temperature of 125°C. With gold over nickel termination finish and UL94V-0 flammability rating, this connector offers reliable performance in commercial settings.
09032966850
BOARD EURO CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Terminal Length: .177 inch; Contact Pattern: RECTANGULAR;
09031246901
BOARD EURO CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
09031962921
09031962921 by Harting Electronics & Kg is a board euro connector with 96 contacts in 3 rows. It features a mating contact pitch of 0.1", insulation resistance of 1TΩ, and dielectric voltage withstand of 1000VAC. Ideal for applications requiring durable connectors with high reliability in commercial settings.
09031606901
09031606901 by Harting Electronics & Kg is a board euro connector with 64 contacts arranged in rows A, B, and C. It features a mating contact pitch of 0.1 inch and insulation resistance of 1T ohm, suitable for commercial applications requiring a max operating temperature of 125°C. The connector has gold over nickel termination finish and conforms to DIN standards, making it ideal for PCBs with rectangular contact patterns.
09031966922
The Harting Electronics & Kg 09031966922 is a board euro connector with a pitch of 0.1 inch. Its top specifications include a body length of 3.701 inch, insulation resistance of 1000000000000 ohm, dielectric withstanding voltage of 1000VAC, and a maximum operating temperature of 125 °C. It has 96 contacts and is designed for general purpose applications in the commercial sector.
09032646821
BOARD EURO CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; Body Depth: .457 inch;
09031646921222
BOARD EURO CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Termination Type: SOLDER; DIN Conformance: YES;
09031966919
09031966919 by Harting Electronics & Kg is a 96-contact, 3-row board Euro connector with gold over nickel termination. DIN-conforming with UL94V-0 flammability rating, it features right-angle mounting for solder termination. Ideal for applications requiring reliable male connectors in headers and edge type connectors.
09031966951
BOARD EURO CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Termination Contact Finish: TIN OVER NICKEL;
09036966921
09032966824
BOARD EURO CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Body or Shell Style: PLUG;
09031602901
09031602901 by Harting Electronics & Kg is a board euro connector with a mating contact pitch of 0.1 inch. It has a body length of 3.701 inch and insulation resistance of 1000000000000 ohm. This connector is commonly used in applications requiring reliable signal transmission and high current carrying capacity.
09033966921
BOARD EURO CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Durability: 400 Cycles;
09032966821
09032966821 by Harting Electronics & Kg is a board euro connector with a mating contact pitch of 0.1 inch. It has a body length of 3.74 inch and insulation resistance of 1000000000000 ohm. This connector is commonly used in applications requiring high durability and reliability, such as commercial electronics.
09031426801
BOARD EURO CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved