Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC; Surface Mount: NO; Maximum Holding Current: 75 mA; Minimum Critical Rate of Rise of Off-state Voltage: 20 V/us; Maximum DC Gate Trigger Voltage: 2.5 V; Repetitive Peak Off-state Voltage: 200 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Connector Distribution Corp
1+ parts
100+ parts
1k+ parts
10k+ parts
Right Parts Inc.
Assy Fe
Triode For Alternating Current (TRIAC) SC265B2 attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Harris Semiconductor
Minimum Critical Rate of Rise of Commutation Voltage:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
Maximum Leakage Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Trigger Device Type:
SC265B2 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
KSZ9031RNXIC
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Laube Technology
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
Z0107MN0,135
NXP Semiconductors
Z0107MN0,135 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 1A max RMS on-state current. It has a 5mA max DC gate trigger current and operates b/w -40°C to 150°C. Ideal for AC power control applications requiring precise switching capabilities.
MAC97A8RLRM
Onsemi
MAC97A8RLRM by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 0.6A max RMS on-state current, and 5mA max DC gate trigger current. It is used in applications requiring a 4 quadrant logic level TRIAC for AC switching operations at temperatures ranging from -40 °C to 110°C.
BT136S-600
Philips Semiconductors
TRIAC; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Maximum Holding Current: 15 mA; Minimum Operating Temperature: -40 Cel;
DTM12C-N
DTM12C-N by Onsemi is a TRIAC with 1.5V max on-state voltage, 30mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -40 °C to 125°C, ideal for AC power control applications requiring up to 12A RMS on-state current and 200V repetitive peak off-state voltage.
MAC997B6RL1G
MAC997B6RL1G by Onsemi is a single TRIAC with 3 terminals, max. DC gate trigger current of 5mA, and max. RMS on-state current of 0.8A. Ideal for applications requiring a 4 quadrant logic level TRIAC, it operates b/w -40 °C to 110°C and has a repetitive peak off-state voltage of 400V.
TIC205B
TIC205B by Texas Instruments is a TRIAC with 3 terminals, max. RMS current of 2A, and DC gate trigger voltage of 2V. It operates b/w -40 to 110°C and is ideal for AC power control applications due to its 4-quadrant logic level trigger device type.
BTA26600B
Loras Industries
BTA26600B by Loras Industries is a TRIAC with 600V repetitive peak off-state voltage, 25A max RMS on-state current, and 1.5V max DC gate trigger voltage. It is ideal for AC power control applications due to its single configuration, through-hole terminal form, and isolated case connection.
BTA16-600BW3G
Littelfuse
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
TIC226M-S
Bourns
TIC226M-S by Bourns is a single TRIAC with a max RMS on-state current of 8A and repetitive peak off-state voltage of 600V. It is commonly used in applications requiring 4 quadrant logic level triggering, such as motor control and lighting systems.
BTA06-600SWRG
BTA06-600SWRG by STMicroelectronics is a single TRIAC with 600V repetitive peak off-state voltage and 6A max RMS on-state current. It features a 10mA max DC gate trigger current and operates b/w -40°C to 125°C. Ideal for applications requiring precise switching control in various electronic devices.
BTA25-800CW3G
BTA25-800CW3G by Onsemi is a single TRIAC with 25A RMS on-state current, 800V repetitive peak off-state voltage, and 35mA max DC gate trigger current. Ideal for AC power control applications in various industries due to its snubberless design and wide operating temperature range from -40°C to 125°C.
Z0103MA1AA2
Z0103MA1AA2 by STMicroelectronics is a 4 QUADRANT LOGIC LEVEL TRIAC with 600V repetitive peak off-state voltage. It has a max on-state current of 1A and DC gate trigger current of 5mA. Ideal for applications requiring precise AC power control in industrial equipment and lighting systems.
DTA16G
DTA16G by Onsemi is a TRIAC with 1.4V max on-state voltage, 50mA max DC gate trigger current, and 2mA max leakage current. It operates at up to 125 °C and has a max RMS on-state current of 16A. Ideal for applications requiring precise AC power control in various electronic devices.
MAC210A8G
MAC210A8G by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 10A max RMS on-state current, and 2V max DC gate trigger voltage. It is used in applications requiring AC power control such as dimmer switches, motor speed controls, and heating controllers.
MAC4DHM-001
MAC4DHM-001 by Onsemi is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It operates b/w -40 to 110 °C, with a 5mA max DC gate trigger current. Ideal for applications requiring precise AC power control in various electronic devices.
SM10LZ47
Toshiba
The Toshiba SM10LZ47 is a TRIAC with max. on-state current of 10A, trigger voltage of 1.5V, and off-state voltage of 800V. Ideal for AC applications requiring up to 110A peak current handling in temperatures ranging from -40°C to 125°C. Package style: FLANGE MOUNT, terminals: THROUGH-HOLE, isolated case connection.
Z0103MAG
Z0103MAG by Onsemi is a single TRIAC with 600V repetitive peak off-state voltage and 1A max RMS on-state current. It operates b/w -40 to 125 °C, ideal for controlling AC power in various applications like dimmers, motor speed controllers, and heating control systems.
SC265M2
TRIAC; Package Style (Meter): POST/STUD MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
MAC212A8FP
MAC212A8FP by Onsemi is a single TRIAC with 12A max RMS on-state current and 600V repetitive peak off-state voltage. Ideal for 4 quadrant logic level applications, it has a max DC gate trigger current of 50mA. With an operating temperature range from -40 to 125 °C, it is UL recognized for various isolated case connection uses.
2N6075A
2N6075A by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 4A max RMS on-state current, and 20mA DC gate trigger current. It is used in applications requiring isolated case connection, such as motor control and lighting dimming systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Harris Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved