Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SILICON SURGE PROTECTOR; Surface Mount: NO; Maximum Operating Temperature: 155 Cel; Maximum Breakdown Voltage: 9 V; Minimum Operating Temperature: -55 Cel; Maximum On-state Voltage: 1.5 V;
Median Price
$0.754
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.727
1k+ parts
$0.603
10k+ parts
$0.538
DigiKey
$0.910
Verical
$0.672
American Microsemiconductor Inc.
$24.100
DigiKey Marketplace
ACDS - Activité Composants Distribution Service
Bristol Electronics
LittleDiode
Electronic Expediters
Microchip USA
$3.705
Glotronic Ltd.
Authorized Procurement Solutions
Perfect Parts
Cyclops Electronics Ltd (Excess)
Silicon Surge Protectors 2N4988 attributes and parameters. Explore more Silicon Surge Protectors devices from General Electric Solid State
Maximum Breakdown Voltage:
Maximum Holding Current:
Maximum On-state Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Sub-Category:
Surface Mount:
Trigger Device Type:
2N4988 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5961-01-114-3389, 5961011143389
NIIN
011143389
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
FT232RL-REEL
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Dc Components
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NP1100SCMCT3G
NP1100SCMCT3G by Onsemi is a silicon surge protector with a non-repetitive peak on-state current of 30A. It features a max DC off-state voltage of 90V and operates b/w -55 °C to 150°C. Ideal for applications requiring protection against surges in electronic circuits.
TPA130A-18-RL
STMicroelectronics
STMicroelectronics TPA130A-18-RL is a single silicon surge protector with 30A non-repetitive peak on-state current. Its package is made of plastic/epoxy, featuring wire terminals and a breakdown voltage of 173V. Ideal for protecting electronic devices from power surges in various applications.
SMTPA120
STMicroelectronics' SMTPA120 is a single silicon surge protector with 16A non-repetitive peak on-state current and 120V repetitive peak reverse voltage. It is surface mountable, operates b/w -55°C to 150°C, and ideal for protecting electronic circuits from voltage surges.
TPA100RL
STMicroelectronics' TPA100RL is a single silicon surge protector with 16A non-repetitive peak on-state current and 100V repetitive peak reverse voltage. It is used for surge protection in applications requiring isolated case connection, with an operating temperature range of -55 to 150 °C.
NP2100SAT3G
NP2100SAT3G by Onsemi is a single silicon surge protector with 180V DC off-state voltage and 150 °C max operating temp. It features a thyristor surge protector trigger device, UL recognized for protection in various applications like power supplies and telecommunications equipment.
TISP1082F3DR
Texas Instruments
TISP1082F3DR by Texas Instruments is a Silicon Surge Protector with 4A Non Repetitive Peak On-state Current, 66V Max DC Off-state Voltage, and 82V Max Breakdown Voltage. It is used for surge protection in electronic circuits, featuring a series connected configuration with gull wing terminals and UL recognition.
TISP4350M3LMFR
TISP4350M3LMFR by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, has 350V breakdown voltage, and UL recognized. Ideal for protecting electronic devices from power surges in various applications.
TISP4180H4BJR
TISP4180H4BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It features a thyristor surge protector trigger device and can operate b/w -40°C to 150°C. Ideal for surface mount applications requiring protection against voltage spikes.
TISP4260H3LM
TISP4260H3LM by Texas Instruments is a single thyristor surge protector with 60A peak current, 200V DC voltage, and 150°C max operating temp. It is used for surge protection in various applications requiring high holding current and breakdown voltage.
TISP4350H3LP
TISP4350H3LP by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak current and 350V breakdown voltage. It features a cylindrical package style, wire terminals, and thyristor surge protection. Ideal for safeguarding electronic devices from voltage spikes in various applications.
TPA120A-18-RL
STMicroelectronics TPA120A-18-RL is a single silicon surge protector with 30A non-repetitive peak on-state current. It has a max breakdown voltage of 160V, wire terminals, and matte tin finish. Ideal for protecting electronic devices from power surges in various applications.
TISP4070M3BJR
TISP4070M3BJR by Texas Instruments is a single silicon surge protector with 32A peak current, 58V DC voltage, and 70V breakdown voltage. It is a thyristor surge protector for applications requiring protection against electrical surges in small outline packages. Operating temperature ranges from -40°C to 150°C making it suitable for various electronic devices.
TISP7240F3P
TISP7240F3P by Texas Instruments is a silicon surge protector with 5.7A peak current, 180V DC voltage, and 240V breakdown voltage. It is configured with 3 delta-connected elements for surge protection in various applications like power supplies and telecommunications systems.
NUD4700SNT1G
NUD4700SNT1G by Onsemi is a silicon surge protector with 1.3A max on-state current and 10V max DC off-state voltage. Ideal for protecting electronic circuits from voltage spikes, it has a trigger device type of silicon surge protector and operates b/w -40 to 150°C.
NP0640SBMCT3G
NP0640SBMCT3G by Onsemi is a single silicon surge protector with a non-repetitive peak on-state current of 30A. It operates b/w -55 °C to 150°C, featuring a max DC off-state voltage of 58V. This thyristor surge protector is ideal for applications requiring UL recognized trigger devices in surface mount configurations.
TISP4400H3LMR
TISP4400H3LMR by Texas Instruments is a single silicon surge protector with 60A peak current, 300V off-state voltage, and 150°C max operating temp. Ideal for protecting circuits from surges in applications requiring reliable overvoltage protection.
SMP100LC-65
Vishay Intertechnology's SMP100LC-65 is a silicon surge protector with 55A non-repetitive peak on-state current and 65V repetitive peak reverse voltage. Ideal for protecting electronic circuits, it features a thyristor surge protector configuration in a surface-mount package with plastic/epoxy body material.
TISP2125F3D
TISP2125F3D by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It has a non-repetitive peak on-state current of 4A and max breakdown voltage of 125V. Ideal for protecting electronic circuits from voltage surges, it features a small outline package style and is UL recognized.
TISP4290M3LM
TISP4290M3LM by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, featuring a breakdown voltage of 290V. Ideal for UL-recognized applications requiring thyristor surge protection in plastic/epoxy packages.
NP1100SBT3G
NP1100SBT3G by Onsemi is a single silicon surge protector with a max breakdown voltage of 130V. It operates b/w -40 °C to 150°C, making it suitable for various applications requiring protection against surges. This UL recognized thyristor surge protector has a small outline package style and is surface mountable.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved