Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin (Sn); Configuration: COMMON ANODE, 2 DIGITS WITH DECIMAL POINT; Display Height: 14.22 mm; Maximum Forward Current: .03 A; Maximum Operating Temperature: 85 Cel;
Median Price
$4.800
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
DF Sales Co.
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Anansix
Vyrian
Digiode
ECAB
ComSIT Distribution GmbH
Prism Electronics
ACDS - Activité Composants Distribution Service
Sinequanon
M&R Communications
Electronics Depot
Electronic Expediters
Resion
Authorized Procurement Solutions
Supply Digital
Pacific Micro-Tech
Corphita
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
LED Displays MAN6710 attributes and parameters. Explore more LED Displays devices from Fairchild Semiconductor
Additional Features:
Color:
Color At Wavelength:
Configuration:
Display Height:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
No. of Characters:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
Terminal Finish:
MAN6710 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
NSN
5980-01-103-2768, 5980011032768
NIIN
011032768
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
C1206C104K5RACTU
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Fairchild Semiconductor
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SC56-11SRWA
Kingbright Electronic
The Kingbright Electronic SC56-11SRWA is a COMMON CATHODE 7-segment LED display with peak wavelength of 660nm. It has a max forward current of 0.03A and max forward voltage of 2.5V, making it suitable for applications requiring a SUPER BRIGHT RED numeric display up to 85°C, such as digital clocks or timers.
LCM-S01601DSR
Lumex
5 X 8 DOT MATRIX LED DISPLAY;
TIL702
TIL702 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 680nm. It has a display height of 13mm and max forward voltage of 2V. Ideal for applications requiring red color output, operating b/w -25°C to 85°C temperature range.
LTC-571HR
Lite-on Technology
LTC-571HR by Lite-on Technology is a COMMON CATHODE, MULTIPLEXED 3-digit LED display with peak wavelength of 635nm. It operates b/w -35°C to 85°C, has a display height of 14.2mm, and requires a max forward current of 0.025A. Ideal for numeric displays in various applications due to its high efficiency red color and smart/normal optoelectronic type.
HDSP-7503-DD000
Broadcom
Broadcom's HDSP-7503-DD000 LED display features common cathode configuration, 0.03A max forward current, and 635nm peak wavelength. Ideal for smart/normal numeric displays, it operates b/w -40 to 100°C, with a 7.6mm height and high efficiency red color for applications requiring clear visibility.
AML92ERL
Micro Switch
SINGLE COLOR LED DISPLAY CLUSTER; Minimum Operating Temperature: -20 Cel; Maximum Forward Current: .05 A; No. of Functions: 1; Color: RED; Maximum Operating Temperature: 60 Cel;
TIL327
TIL327 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 655nm and red color. It has a display height of 8mm, max forward voltage of 2V, and operates b/w -25°C to 85°C. Ideal for applications requiring numeric displays in various electronic devices.
HDSP5521
Three-five Systems
HDSP5521 by Three-five Systems is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 635nm. It has a common anode configuration, display height of 14mm, and operates b/w -40°C to 100°C. Ideal for applications requiring red color at wavelength and max forward voltage of 2.5V.
HDSP-316Y
HDSP-316Y by Broadcom is a COMMON CATHODE 7-segment LED display with a peak wavelength of 583nm. It operates b/w -40°C to 100°C, has a forward current of 0.03A, and a max forward voltage of 2.5V. Ideal for applications requiring bright yellow numeric displays in various electronic devices.
MAN6760
Quality Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 85 Cel; Additional Features: IC COMPATIBLE; Display Height: 14.22 mm; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Minimum Operating Temperature: -40 Cel;
HCMS-2905
Agilent Technologies
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 4; Color: RED; Peak Wavelength (nm): 645; Minimum Operating Temperature: -40 Cel;
HDSP-0962
HDSP-0962 by Broadcom is a SMART/NORMAL 4 X 7 DOT MATRIX LED DISPLAY with a peak wavelength of 568nm. It has a max forward current of 0.01A and can operate in temperatures ranging from -55°C to 85°C. This LED display is commonly used for various applications requiring a compact and efficient green color display.
AML92EYY
Honeywell
SINGLE COLOR LED DISPLAY CLUSTER; No. of Functions: 1; Maximum Forward Current: .015 A; Color: YELLOW; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 60 Cel;
DA56-11EWA
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 2 DIGITS WITH DECIMAL POINT; Maximum Forward Current: .03 A; Color: HIGH EFFICIENCY RED; Additional Features: IC COMPATIBLE; Minimum Operating Temperature: -40 Cel;
TIL309
TIL309 by Texas Instruments is a SMART/NORMAL 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has a max forward current of 0.001A and display height of 6.45mm. Ideal for applications requiring red color output, operating b/w temperatures of 0-85°C.
HCMS-2964
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Display Height: 4.57 mm; Peak Wavelength (nm): 600; Color: ORANGE;
TIL323A
TIL323A by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has common anode configuration, 13mm display height, and max forward voltage of 3V. Ideal for applications requiring green light emission, operating b/w -25°C to 85°C temperature range.
HDSP-2131
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Peak Wavelength (nm): 583; Display Height: 5 mm; Minimum Operating Temperature: -55 Cel;
HDSP-H103-EF000
Broadcom's HDSP-H103-EF000 LED display features common cathode configuration, 7-segment numeric type, and deep red color. With a peak wavelength of 656nm, it operates b/w -20°C to 100°C. Ideal for applications requiring a compact display with a max forward current of 0.015A.
HCMS-2975
Hewlett Packard
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 5.08 mm; Peak Wavelength (nm): 645; Maximum Forward Voltage: 5.5 V; Minimum Operating Temperature: -40 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved