Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 5.5 V; Peak Wavelength (nm): 641; JESD-609 Code: e0; Color At Wavelength: Orange-Red;
Median Price
$37.930
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
Advanced Electronics
$0.401
Corohmni
$0.467
AZTECH Wire
$6.893
Ampacity Inc.
$14.100
Decca Corp
$17.000
$16.660
$16.493
Bastille Electronics
$36.034
$33.758
Argo Parts USA
Glotronic Ltd.
Authorized Procurement Solutions
Supply Digital
Continental Prestige Electronics
Corphita
LED Displays HCMS-3912 attributes and parameters. Explore more LED Displays devices from Agilent Technologies
Additional Features:
Color:
Color At Wavelength:
Configuration:
Display Height:
Maximum Forward Voltage:
JESD-609 Code:
No. of Characters:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
Terminal Finish:
HCMS-3912 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Design/Specification - HCMS/HDLx/HDSP 29/Apr/2022
Agilent supports scientists in 110 countries in cutting-edge life science research; patient diagnostics; and testing required to ensure the safety of water, food and pharmaceuticals. Our advanced instruments, software, consumables, and services enable our customers to produce the most accurate and reliable results as well as optimal scientific, economic, and operational outcomes. We play a role in advancing important research and testing, with our scientists creating some of the world's most leading-edge technology and our field engineers working side by side with customers to help them maximize productivity. We bring these solutions to a variety of markets, from pharma and diagnostics to applied materials and chemicals. Together with our customers, we’re bringing great science to life.
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
1N4148WT
Diotec Semiconductor Ag
LF-3011VA
ROHM
ROHM LF-3011VA is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with 0.015A forward current. It operates b/w -25 to 75°C, displaying RED color at 8mm height. Ideal for smart applications requiring clear numeric display with decimal point.
HDSP-A151
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; Color At Wavelength: Red; Peak Wavelength (nm): 645; Minimum Operating Temperature: -20 Cel;
HDSP-523Y
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin (Sn); Color: YELLOW; Display Height: 14.2 mm; No. of Characters: 2; Minimum Operating Temperature: -35 Cel;
TIL836
Texas Instruments
TIL836 by Texas Instruments is a Common Cathode 7 SEG NUMERIC LED DISPLAY with peak wavelength of 655nm. It has 4 characters, red color, and 13mm display height. With max operating temp of 85°C and forward voltage of 2V, it's ideal for digital displays in various electronic applications.
TIL344
TIL344 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 602nm. It has common anode configuration, orange color at 13mm display height. With max forward voltage of 3V, it operates b/w -25°C to 85°C making it ideal for temperature-sensitive applications.
LTP-2057AKA
Lite-on Technology
LTP-2057AKA by Lite-on Technology is a COMMON CATHODE, 1 DIGIT LED display with SMART/NORMAL 5 X 7 DOT MATRIX. It has a Max Forward Current of 0.013 A and operates b/w -35 to 85 °C. Ideal for applications requiring a SUPER ORANGE color display with a height of 50.8 mm.
HDSP-B08G
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: Common Anode; Peak Wavelength (nm): 568; Maximum Operating Temperature: 105 Cel; Color At Wavelength: Green;
LTC-5653G-01
LTC-5653G-01 by Lite-on Technology is a COMMON ANODE, MULTIPLEXED 4-digit LED display with 0.025A forward current. It features SMART/NORMAL 7 SEG NUMERIC LEDs in GREEN color, suitable for applications requiring a temperature range of -35 to 85 °C. Display height is 14.22mm, making it ideal for various electronic projects.
AML92ERL
Honeywell
SINGLE COLOR LED DISPLAY CLUSTER; Minimum Operating Temperature: -20 Cel; Color: RED; No. of Functions: 1; Maximum Operating Temperature: 60 Cel; Maximum Forward Current: .05 A;
HDSP-A101
Infineon Technologies
Infineon's HDSP-A101 is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 645nm. It features common anode configuration, red color at wavelength, and 8mm display height. Ideal for applications requiring operating temperatures from -20°C to 100°C.
5082-7653
Everlight Electronics
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; No. of Characters: 1; Additional Features: IC COMPATIBLE, HIGH RELIABILITY; Minimum Operating Temperature: -40 Cel; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Maximum Forward Current: .03 A;
HDSP-U313
Broadcom
HDSP-U313 by Broadcom is a COMMON CATHODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 583nm. It operates at -25 to 90°C, has forward current of 0.02A and voltage of 2.5V. Ideal for applications requiring YELLOW display with 8mm height and decimal point.
HDSP-H151
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 3 V; Maximum Operating Temperature: 100 Cel; Display Height: 14.2 mm; No. of Functions: 1;
HDSP5603
Three-five Systems
HDSP5603 by Three-five Systems is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 566nm. It has common cathode configuration, green color at wavelength, and 14mm display height. With max operating temp of 100°C and min of -40°C, it's ideal for applications requiring high visibility and reliability.
AML92EGL
SINGLE COLOR LED DISPLAY CLUSTER; Color: GREEN; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 60 Cel; No. of Functions: 1; Maximum Forward Current: .05 A;
HDSP-2112
HDSP-2112 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 635nm. It operates b/w -45°C to 85°C, featuring high efficiency red color at 5mm height. Ideal for applications requiring complex configurations and up to 8 characters display.
HDSP-523G
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin (Sn); Display Height: 14.2 mm; Peak Wavelength (nm): 566; Minimum Operating Temperature: -35 Cel; No. of Characters: 2;
HCMS-2905
Broadcom's HCMS-2905 is a 5x7 dot matrix LED display with peak wavelength of 645nm. It operates b/w -40°C to 85°C, with max forward voltage of 5.5V. Ideal for applications requiring compact, high-quality red displays in harsh environments.
5082-7651
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 100 Cel; Color At Wavelength: Red; JESD-609 Code: e0;
HDSP-C3E3
HDSP-C3E3 by Broadcom is a COMMON CATHODE LED display with 1 digit and decimal point. Featuring a peak wavelength of 640nm, it operates b/w -40 to 85°C. Ideal for applications requiring a SMART/NORMAL 7 SEG NUMERIC LED DISPLAY in orange-red color, with a display height of 9.1mm and max forward voltage of 2.3V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HCMS-2965
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 4.57 mm; Color At Wavelength: Red; No. of Characters: 4; JESD-609 Code: e0;
Broadcom's HCMS-2965 is a 5x7 dot matrix LED display with peak wavelength of 645nm. It operates b/w -40°C to 85°C, with max forward voltage of 5.5V. Ideal for applications requiring a compact red LED display with complex configuration and four functions.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 5.5 V; Configuration: COMPLEX; JESD-609 Code: e0; Maximum Operating Temperature: 85 Cel;
HCMS-3963
Broadcom's HCMS-3963 is a complex LED display with SMART/NORMAL 5x7 dot matrix. Operating temp ranges from -40 to 85°C, terminal finish TIN over NICKEL. Ideal for applications requiring a green display with 4.57mm height, offering versatile functionality in various settings.
HCMS-2975
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Display Height: 4.57 mm; Color At Wavelength: Red; Maximum Forward Voltage: 5.5 V;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 5.08 mm; Peak Wavelength (nm): 645; Maximum Forward Voltage: 5.5 V; Minimum Operating Temperature: -40 Cel;
5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: TIN COPPER; Color: RED; Maximum Operating Temperature: 85 Cel; No. of Characters: 8; Maximum Forward Voltage: 5.5 V;
HCMS-2903
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Peak Wavelength (nm): 568; Maximum Operating Temperature: 85 Cel; Display Height: 3.81 mm;
Broadcom's HCMS-2903 is a 5x7 dot matrix LED display with peak wavelength of 568nm. It operates b/w -40°C to 85°C, has max forward voltage of 5.5V, and displays green color. Ideal for applications requiring compact, high-quality alphanumeric or simple graphics displays.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 5.5 V; No. of Functions: 4; Color At Wavelength: Green; Maximum Operating Temperature: 85 Cel;
HCMS-2913
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 3.81 mm; Peak Wavelength (nm): 568; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: GREEN; No. of Functions: 8; Maximum Forward Voltage: 5.5 V; Color At Wavelength: Green;
Broadcom's HCMS-2913 is a 5x7 dot matrix LED display with peak wavelength of 568nm. It has 8 functions, operates b/w -40°C to 85°C, and has a max forward voltage of 5.5V. Ideal for applications requiring a green color display with complex configurations.
HCMS-3903
Broadcom's HCMS-3903 is a complex LED display with 4 functions, featuring SMART/NORMAL 5x7 dot matrix. Operating temperature ranges from -40°C to 85°C. Ideal for applications requiring a green display with 3.71mm height, such as industrial control panels and electronic instrumentation.
HCMS-3906
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 4; Minimum Operating Temperature: -40 Cel; Color At Wavelength: Orange-Red; JESD-609 Code: e0;
HCMS-3906 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 635nm. It operates b/w -40°C to 85°C, with max forward voltage of 3.3V. Ideal for applications requiring compact, high-brightness displays in orange-red and red colors.
HCMS-2973
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Maximum Forward Voltage: 5.5 V; JESD-609 Code: e0; Display Height: 5.08 mm;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Color At Wavelength: Green; Peak Wavelength (nm): 568; No. of Functions: 8;
Broadcom's HCMS-2973 is a 5x7 dot matrix LED display with peak wavelength of 568nm. Featuring 8 functions, it operates b/w -40°C to 85°C. Ideal for applications requiring a green color display with max forward voltage of 5.5V and character limit of 8.
HCMS-3917
The Broadcom HCMS-3917 is a SMART/NORMAL 5x7 dot matrix LED display with peak wavelength of 574nm. It operates b/w -40°C to 85°C, has a max forward voltage of 3.3V, and displays in green color. Ideal for applications requiring an 8-character display with a height of 3.71mm such as industrial control panels and electronic signage.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved