Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Broadcom's HCMS-2965 is a 5x7 dot matrix LED display with peak wavelength of 645nm. It operates b/w -40°C to 85°C, with max forward voltage of 5.5V. Ideal for applications requiring a compact red LED display with complex configuration and four functions.
Median Price
$41.640
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Farnell
1+ parts
$24.440
100+ parts
$17.290
1k+ parts
-
10k+ parts
Mouser Electronics
$28.490
Newark
$42.410
$30.140
$29.540
EBV Elektronik
Digiode
$23.218
Nova Conductors
$24.210
Vyrian
LWI Electronics Inc
Manoshevitz Elec. Sales
Corohmni
$0.453
Aztec Data Supply Inc.
$0.516
Advanced Electronics
$0.634
$0.603
Andel Nordic
$7.530
$7.228
AZTECH Wire
$8.840
$8.490
$8.320
$8.150
Corphita
$21.996
Continental Prestige Electronics
$24.200
$23.716
Netroflash
Modulus Dynamics
$26.862
$26.593
$25.788
Decca Corp
$45.210
$44.306
$43.863
Argo Parts USA
Supply Digital
Perfect Parts
The complex configuration allows for advanced functions and capabilities, making this LED display versatile and suitable for a variety of applications.
The peak wavelength of 645nm ensures that the display emits a bright red color, making it eye-catching and easy to read.
The dot matrix display offers a high level of customization and flexibility in displaying characters and graphics, enhancing the visual appeal of the product.
With a high maximum operating temperature of 85°C, this LED display can be used in a wide range of environments without overheating or malfunctioning.
The low minimum operating temperature of -40°C ensures that the LED display remains functional even in extreme cold conditions, making it reliable in various climates.
The TIN COPPER terminal finish provides excellent conductivity and durability, helping to maintain a secure connection and a longer lifespan for the display.
With the ability to display 4 characters, this LED display is ideal for showcasing short messages or information in a clear and concise manner.
The vibrant red color of this display is highly visible and attention-grabbing, making it suitable for applications where visibility is crucial.
The compact display height of 4.57mm allows for a sleek and unobtrusive design, making it easy to integrate this LED display into various products or systems.
The high maximum forward voltage of 5.5V ensures efficient and consistent performance of the LED display, even in demanding conditions or high-power applications.
LED Displays HCMS-2965 attributes and parameters. Explore more LED Displays devices from Broadcom
Additional Features:
Color:
Color At Wavelength:
Configuration:
Display Height:
Maximum Forward Voltage:
JESD-609 Code:
No. of Characters:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
Terminal Finish:
HCMS-2965 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Design/Specification - HCMS/HDLx/HDSP 29/Apr/2022
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
CRCW04020000Z0ED
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Secos
HDSP-5521-GH000
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Forward Current: .03 A; Color: HIGH EFFICIENCY RED; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e1;
SL5722T
The Onsemi SL5722T is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm, ideal for applications requiring green light emission. With a display height of 18mm and operating temperatures ranging from -20 °C to 65°C, it offers clear visibility in various environments. Perfect for showcasing up to 6 characters in LED displays.
HDSP5603
Three-five Systems
HDSP5603 by Three-five Systems is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 566nm. It has common cathode configuration, green color at wavelength, and 14mm display height. With max operating temp of 100°C and min of -40°C, it's ideal for applications requiring high visibility and reliability.
HDSP2113S
Siemens
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Maximum Operating Temperature: 85 Cel; Additional Features: CMOS COMPATIBLE, WITH MEMORY/MULTIPLEXER; Color: GREEN; No. of Functions: 8; Minimum Operating Temperature: -40 Cel;
KCSC03-107
Kingbright Electronic
KCSC03-107 by Kingbright Electronic is a COMMON CATHODE 7 SEG NUMERIC LED DISPLAY with 0.03A forward current and 2.5V forward voltage. Featuring a peak wavelength of 590nm, it's ideal for applications requiring a SUPER BRIGHT YELLOW display up to 85°C, such as digital clocks or timers.
MAN6760
Quality Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 85 Cel; Additional Features: IC COMPATIBLE; Display Height: 14.22 mm; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Minimum Operating Temperature: -40 Cel;
HDSP-2502
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: HIGH EFFICIENCY RED; JESD-609 Code: e0; Peak Wavelength (nm): 635; Maximum Operating Temperature: 85 Cel;
SLA9744
SLA9744 by Onsemi is a 16x16 Dot Matrix LED Display with common cathode configuration. It operates b/w -20 °C to 50°C, emitting red light at peak wavelength of 630nm. With a display height of 32mm, it finds applications in various LED display projects.
HDSP-F151
Broadcom
HDSP-F151 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with a peak wavelength of 645nm. It has a max forward current of 0.04A and operates b/w -20°C to 100°C. Ideal for applications requiring a red LED display with a height of 10mm, such as digital clocks or electronic meters.
SLF313D
LED Displays; Maximum Operating Temperature: 60 Cel; Peak Wavelength (nm): 567; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Green;
TIL308
Texas Instruments
TIL308 by Texas Instruments is a SMART/NORMAL 7 SEG NUMERIC LED DISPLAY with 0.001 A forward current, ideal for applications requiring a RED display. With a height of 6.45 mm and operating temperatures from 0 to 85 °C, it offers a COMPLEX configuration for various electronic projects.
HDSP-703E
Hewlett Packard
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Color: HIGH EFFICIENCY RED; Display Height: 17.3 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -35 Cel; Maximum Forward Current: .025 A;
HDSP-7503
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Color: HIGH EFFICIENCY RED; Color At Wavelength: Red; No. of Functions: 1;
5082-7651
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Forward Current: .03 A; Color At Wavelength: Red; Minimum Operating Temperature: -40 Cel; Display Height: 10.92 mm;
LTC-4624JD
Lite-on Technology
Lite-on Technology's LTC-4624JD is a COMMON ANODE, MULTIPLEXED LED display with 3 digits and decimal point. Featuring HYPER RED color at 650nm peak wavelength, it operates b/w -35 to 85 °C with 0.025A forward current. Ideal for clock displays due to its 10mm height and 0.65mcd luminous intensity.
HCMS-2904
Broadcom's HCMS-2904 is a 5x7 dot matrix LED display with peak wavelength of 600nm. It operates b/w -40°C to 85°C, with max forward voltage of 5.5V. Ideal for applications requiring a compact, high-quality orange display with complex configurations and up to 4 functions.
TIL392-9
TIL392-9 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. Featuring peak wavelength of 660nm, it has 9 characters and display height of 3mm. With max forward voltage of 2.1V, it's ideal for applications requiring red color at wavelength, operating b/w -25°C to 85°C.
AML92ERY
Micro Switch
SINGLE COLOR LED DISPLAY CLUSTER; Minimum Operating Temperature: -20 Cel; Color: RED; Maximum Operating Temperature: 60 Cel; No. of Functions: 1; Maximum Forward Current: .015 A;
LTC-4627G
LTC-4627G by Lite-on Technology is a COMMON ANODE, MULTIPLEXED 4-digit LED display with peak wavelength of 565nm. It operates b/w -35°C to 85°C, has max forward current of 0.025A and max forward voltage of 2.6V. Ideal for numeric displays in various applications due to its green color and 10mm height.
TA20-11EWA
Kingbright
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Color: HIGH EFFICIENCY RED; Configuration: COMMON ANODE, 1 DIGIT; Minimum Operating Temperature: -40 Cel; Display Height: 50.72 mm; No. of Functions: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HCMS-2965
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 4.57 mm; Color At Wavelength: Red; No. of Characters: 4; JESD-609 Code: e0;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 5.5 V; Configuration: COMPLEX; JESD-609 Code: e0; Maximum Operating Temperature: 85 Cel;
HCMS-3963
Broadcom's HCMS-3963 is a complex LED display with SMART/NORMAL 5x7 dot matrix. Operating temp ranges from -40 to 85°C, terminal finish TIN over NICKEL. Ideal for applications requiring a green display with 4.57mm height, offering versatile functionality in various settings.
HCMS-2975
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Display Height: 4.57 mm; Color At Wavelength: Red; Maximum Forward Voltage: 5.5 V;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 5.08 mm; Peak Wavelength (nm): 645; Maximum Forward Voltage: 5.5 V; Minimum Operating Temperature: -40 Cel;
5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: TIN COPPER; Color: RED; Maximum Operating Temperature: 85 Cel; No. of Characters: 8; Maximum Forward Voltage: 5.5 V;
HCMS-2903
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Peak Wavelength (nm): 568; Maximum Operating Temperature: 85 Cel; Display Height: 3.81 mm;
Broadcom's HCMS-2903 is a 5x7 dot matrix LED display with peak wavelength of 568nm. It operates b/w -40°C to 85°C, has max forward voltage of 5.5V, and displays green color. Ideal for applications requiring compact, high-quality alphanumeric or simple graphics displays.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 5.5 V; No. of Functions: 4; Color At Wavelength: Green; Maximum Operating Temperature: 85 Cel;
HCMS-2913
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 3.81 mm; Peak Wavelength (nm): 568; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: GREEN; No. of Functions: 8; Maximum Forward Voltage: 5.5 V; Color At Wavelength: Green;
Broadcom's HCMS-2913 is a 5x7 dot matrix LED display with peak wavelength of 568nm. It has 8 functions, operates b/w -40°C to 85°C, and has a max forward voltage of 5.5V. Ideal for applications requiring a green color display with complex configurations.
HCMS-3903
Broadcom's HCMS-3903 is a complex LED display with 4 functions, featuring SMART/NORMAL 5x7 dot matrix. Operating temperature ranges from -40°C to 85°C. Ideal for applications requiring a green display with 3.71mm height, such as industrial control panels and electronic instrumentation.
HCMS-3906
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 4; Minimum Operating Temperature: -40 Cel; Color At Wavelength: Orange-Red; JESD-609 Code: e0;
HCMS-3906 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 635nm. It operates b/w -40°C to 85°C, with max forward voltage of 3.3V. Ideal for applications requiring compact, high-brightness displays in orange-red and red colors.
HCMS-2973
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Maximum Forward Voltage: 5.5 V; JESD-609 Code: e0; Display Height: 5.08 mm;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Color At Wavelength: Green; Peak Wavelength (nm): 568; No. of Functions: 8;
Broadcom's HCMS-2973 is a 5x7 dot matrix LED display with peak wavelength of 568nm. Featuring 8 functions, it operates b/w -40°C to 85°C. Ideal for applications requiring a green color display with max forward voltage of 5.5V and character limit of 8.
HCMS-3917
The Broadcom HCMS-3917 is a SMART/NORMAL 5x7 dot matrix LED display with peak wavelength of 574nm. It operates b/w -40°C to 85°C, has a max forward voltage of 3.3V, and displays in green color. Ideal for applications requiring an 8-character display with a height of 3.71mm such as industrial control panels and electronic signage.
HCMS-2925
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Maximum Operating Temperature: 85 Cel; Display Height: 3.71 mm; Minimum Operating Temperature: -40 Cel; Color At Wavelength: Red; Maximum Forward Voltage: 5.5 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved