Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; No. of Functions: 3; Configuration: COMMON ANODE, 3 DIGITS WITH DECIMAL POINT; Display Height: 14.2 mm; Maximum Operating Temperature: 85 Cel; Color: HYPER RED;
Median Price
$4.595
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$4.930
100+ parts
-
1k+ parts
$2.590
10k+ parts
DigiKey
$5.850
$4.262
$3.142
$2.918
Verical
$3.210
$2.954
RS (Exports)
$4.260
$4.180
SOS electronic
$2.776
$2.516
$2.386
Nova Conductors
$2.886
TME
$4.590
$2.540
$2.290
Vyrian
NAC Semi
$5.090
$4.630
ACDS - Activité Composants Distribution Service
Aztec Data Supply Inc.
$0.261
Corohmni
$0.735
Advanced Electronics
$0.788
$0.717
$0.646
Aranea Global
$2.828
$2.715
Argo Parts USA
Continental Prestige Electronics
LED Displays BA56-12SURKWA attributes and parameters. Explore more LED Displays devices from Kingbright
Color:
Configuration:
Display Height:
Maximum Forward Current:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
BA56-12SURKWA Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
An Innovative LED Solution Provider Kingbright is a Taiwanese LED solution provider built on over 40 years of expertise, innovation and collaboration. We are deeply ingrained in the pursuit of excellence, manufacturing the most comprehensive, reliable and highest quality LEDs in both visible and invisible spectrums to meet various engineering needs in all industries for customers around the globe. Our commitments to technological innovation and quality excellence ensure continuous improvement to products and customer satisfaction with the superior support of our sales offices and warehouses in the US, Europe and across Asia.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nexperia
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
Rfe International
RC0805FR-0710RL
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
Silicon Transistor
HDSP-4603
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Peak Wavelength (nm): 566; Display Height: 10.92 mm; Maximum Forward Voltage: 2.5 V; Maximum Operating Temperature: 100 Cel;
5082-7651
Qt Optoelectronics
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.5 V; Minimum Operating Temperature: -40 Cel; Peak Wavelength (nm): 635; Maximum Operating Temperature: 85 Cel;
DLR2416
Osram Opto Semiconductors
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin (Sn); Depth: 7 mm; Rows Per Display: 1; Characters Per Row: 4; JESD-609 Code: e3;
HDSP-F101
Broadcom
HDSP-F101 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with a peak wavelength of 645nm. It has a max forward current of 0.015A and operates b/w -20°C to 100°C. Ideal for applications requiring a red display, such as digital clocks or electronic meters.
LTS-4301JR
Lite-on Technology
LTS-4301JR by Lite-on Technology is a COMMON CATHODE 7-segment LED display with peak wavelength of 639nm. It operates b/w -35°C to 85°C, with max forward current of 0.025A. Ideal for applications requiring a SUPER RED color display with a height of 10mm and forward voltage of 2.6V.
HDSP-2534
HDSP-2534 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 645nm. It has 8 functions, operates b/w -40°C to 85°C, and features red color at a height of 4.57mm. Ideal for applications requiring complex configurations and high visibility in various environments.
HDSM-281C
Broadcom's HDSM-281C is a 7-segment numeric LED display with common anode configuration. It has a max forward current of 0.025A and a max forward voltage of 2.6V, making it ideal for applications requiring red color displays in temperatures ranging from -40 to 105°C.
HDSP-A151
HDSP-A151 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 645nm. It has a max forward current of 0.04A and display height of 7.6mm. Ideal for applications requiring red color output, operating b/w -20 to 100°C temperatures.
HDSP-201G
HDSP-201G by Broadcom is a 7 SEG NUMERIC LED DISPLAY with COMMON ANODE configuration. It has a display height of 8mm, peak wavelength of 571nm, and max forward current of 0.02A. Ideal for applications requiring green LED displays with a luminous intensity of 6.5mcd and operating temperatures ranging from -35°C to 85°C.
HCMS-2973
Hewlett Packard
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Maximum Forward Voltage: 5.5 V; JESD-609 Code: e0; Display Height: 5.08 mm;
TIL384
TIL384 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has 4 characters, red color at wavelength, and display height of 3mm. With max forward voltage of 1.9V, it operates b/w -10°C to 70°C making it ideal for digital displays in various electronic applications.
SLF716D
LED Displays; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 558; Color At Wavelength: Green;
LDS-M512RI-RA-SUG
Lumex
Lumex LDS-M512RI-RA-SUG is a COMMON ANODE, MULTIPLEXED 7 SEG NUMERIC LED DISPLAY with 0.025 A max forward current. Ideal for applications requiring a GREEN display with 14.2 mm height, operating b/w -40 to 85 °C.
LCM-S01601DSR
5 X 8 DOT MATRIX LED DISPLAY;
TIL367
TIL367 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 655nm. It has 4 characters, red color at 655nm, and display height of 13mm. With max forward voltage of 2.1V, it operates b/w -25°C to 85°C making it ideal for temperature-sensitive applications.
HDSP5621
Three-five Systems
HDSP5621 by Three-five Systems is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 566nm. It has common anode configuration, green color at 14mm display height. Operating temp ranges from -40°C to 100°C, with max forward voltage of 2.5V. Ideal for applications requiring compact numeric displays.
HDSP-2113
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -45 Cel; Color: HIGH PERFORMANCE GREEN; Additional Features: CMOS COMPATIBLE; Peak Wavelength (nm): 568;
LDS-HTC512RI
Lumex's LDS-HTC512RI is a 7 SEG NUMERIC LED DISPLAY with COMMON CATHODE configuration. It has a display height of 14.2mm, peak wavelength of 565nm, and max forward current of 0.025A. Ideal for applications requiring green color output, it operates b/w -40°C to 105°C temperatures efficiently.
HCMS-2975
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Display Height: 4.57 mm; Color At Wavelength: Red; Maximum Forward Voltage: 5.5 V;
AML92EWL
Honeywell
SINGLE COLOR LED DISPLAY CLUSTER; No. of Functions: 1; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 60 Cel; Maximum Forward Current: .05 A; Color: WHITE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BA56-11GWA
Kingbright Electronic
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Color: GREEN; Configuration: COMMON ANODE, 3 DIGITS WITH DECIMAL POINT; Additional Features: IC COMPATIBLE; Display Height: 14.2 mm; Maximum Forward Voltage: 2.5 V;
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 3 DIGITS WITH DECIMAL POINT; Maximum Forward Current: .025 A; Minimum Operating Temperature: -40 Cel; Display Height: 14.22 mm; Color: GREEN;
BA56-12SURKWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Configuration: COMMON ANODE, 3 DIGITS WITH DECIMAL POINT; Display Height: 14.2 mm; Color: HYPER RED;
BA56-12SRWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 660; Maximum Forward Voltage: 2.5 V; Color At Wavelength: Red; Configuration: COMMON ANODE, MULTIPLEXED, 3 DIGITS WITH DECIMAL POINT; Color: SUPER BRIGHT RED;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Additional Features: IC COMPATIBLE; Configuration: COMMON ANODE, 3 DIGITS WITH DECIMAL POINT; Display Height: 14.2 mm; No. of Functions: 3; Maximum Operating Temperature: 85 Cel;
BA56-11SURKWA
BA56-11SURKWA by Kingbright Electronic is a COMMON ANODE 3-digit LED display with 0.03A forward current. Ideal for numeric displays, it features HYPER RED color, 14.2mm height, and operates b/w -40°C to 85°C temperatures.
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .03 A; Minimum Operating Temperature: -40 Cel; Color: HYPER RED; No. of Functions: 3;
BA56-12SYKWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 3 DIGITS WITH DECIMAL POINT; No. of Functions: 3; Maximum Forward Current: .03 A; Color: SUPER BRIGHT YELLOW; Minimum Operating Temperature: -40 Cel;
BA56-13SURKWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 3 DIGITS WITH DECIMAL POINT; Maximum Forward Current: .03 A; Display Height: 14.2 mm; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
BA56-13SYKWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; No. of Functions: 3; Maximum Operating Temperature: 85 Cel; Configuration: COMMON ANODE, 3 DIGITS WITH DECIMAL POINT; Display Height: 14.2 mm; Maximum Forward Current: .03 A;
BA56-11HWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; No. of Characters: 3; Maximum Operating Temperature: 85 Cel; Maximum Forward Voltage: 2.5 V; Configuration: COMMON ANODE, 3 DIGITS WITH DECIMAL POINT; Color At Wavelength: Red;
BA56-12EWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Forward Current: .03 A; Minimum Operating Temperature: -40 Cel; Color: HIGH EFFICIENCY RED; Display Height: 14.2 mm; No. of Functions: 3;
BA56-12GWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; No. of Functions: 3; Configuration: COMMON ANODE, 3 DIGITS WITH DECIMAL POINT; Maximum Operating Temperature: 85 Cel; Additional Features: IC COMPATIBLE; Color: GREEN;
BA56-12YWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -40 Cel; No. of Functions: 3; Maximum Forward Current: .03 A; Color: YELLOW; Additional Features: IC COMPATIBLE;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, MULTIPLEXED, 3 DIGITS WITH DECIMAL POINT; Maximum Forward Voltage: 2.5 V; Color: HIGH EFFICIENCY RED; Color At Wavelength: Orange; Peak Wavelength (nm): 625;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, MULTIPLEXED, 3 DIGITS WITH DECIMAL POINT; Peak Wavelength (nm): 565; No. of Functions: 3; Maximum Forward Current: .025 A; Display Height: 14.2 mm;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Display Height: 14.2 mm; Maximum Forward Voltage: 2.5 V; Peak Wavelength (nm): 590; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
BA56-12CGKWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; No. of Functions: 3; Display Height: 14.2 mm; Maximum Forward Current: .03 A; Color: GREEN; Minimum Operating Temperature: -40 Cel;
BA56-12SEKWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 85 Cel; No. of Functions: 3; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .03 A; Color: SUPER BRIGHT ORANGE;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 3 DIGITS WITH DECIMAL POINT; Maximum Operating Temperature: 85 Cel; No. of Functions: 3; Maximum Forward Current: .03 A; Display Height: 14.2 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved