Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Red; Minimum Operating Temperature: -45 Cel; Maximum Operating Temperature: 85 Cel; Peak Wavelength (nm): 635;
Median Price
$75.490
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Farnell
1+ parts
$41.770
100+ parts
$30.110
1k+ parts
-
10k+ parts
Newark
$109.210
$93.810
EBV Elektronik
Digiode
$57.504
Nova Conductors
$64.614
Vyrian
Connector Distribution Corp
HZD GmbH
Advanced Electronics
$0.416
$0.395
Aztec Data Supply Inc.
$0.428
Corohmni
$0.683
Andel Nordic
$1.853
$1.779
Benley Electronics
$3.750
AZTECH Wire
$9.316
Corphita
$54.477
Continental Prestige Electronics
$64.070
Decca Corp
$111.980
$109.740
$108.643
Neutron USA
$173.160
Authorized Procurement Solutions
Argo Parts USA
Supply Digital
A-Z Elektronik GmbH
Perfect Parts
LED Displays HDSP-2502 attributes and parameters. Explore more LED Displays devices from Hewlett Packard
Color:
Color At Wavelength:
Configuration:
Display Height:
JESD-609 Code:
No. of Characters:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
Terminal Finish:
HDSP-2502 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Design/Specification - HCMS/HDLx/HDSP 29/Apr/2022
PCN Assembly/Origin - Fab change 06/Dec/2021
HP, Inc. engages in the provision of personal computing and other access devices, imaging and printing products, and related technologies, solutions, and services. It operates through the following business segments: Personal Systems, Printing, and Corporate Investments. The Personal Systems segment offers commercial and consumer desktop and notebook personal computers, workstations, thin clients, commercial tablets and mobility devices, retail point-of-sale systems, displays and other related accessories, software, support, and services for the commercial and consumer markets. The Printing segment provides consumer and commercial printer hardware, supplies, solutions and services, and scanning devices. The Corporate Investments segment includes HP Labs and certain business incubation projects. The company was founded by William R. Hewlett and David Packard in 1939 and is headquartered in Palo Alto, CA.
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Jiangsu Changjiang Electronics Technology
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
Lite-on Semiconductor
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
5082-7651
Quality Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Forward Current: .03 A; Additional Features: IC COMPATIBLE; No. of Functions: 1; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
SL1071-31T
SL1071-31T by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Anode configuration, peak wavelength of 700nm, and red color. It operates b/w -20 °C to 60°C, has a display height of 23mm, and requires a max forward voltage of 2.4V. Ideal for applications requiring a compact and bright numeric LED display solution.
HDSP-U503
Broadcom
Broadcom's HDSP-U503 is a COMMON CATHODE 7-segment LED display with peak wavelength of 566nm. It operates b/w -25°C to 90°C, with max forward current of 0.03A and height of 8mm. Ideal for applications requiring high performance green color displays.
HDSP-316Y
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Peak Wavelength (nm): 583; No. of Characters: 1; JESD-609 Code: e1; Maximum Forward Current: .03 A;
MAN6760
Everlight Electronics
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Additional Features: IC COMPATIBLE, HIGH RELIABILITY; Color: RED; Maximum Forward Current: .03 A; Display Height: 14.22 mm; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT;
TIL380-8
Texas Instruments
TIL380-8 by Texas Instruments is a Common Cathode 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has 8 characters, red color, and 3mm display height. Operating temperature ranges from -25°C to 85°C with max forward voltage of 2.1V. Ideal for applications requiring clear numeric displays in various electronic devices.
HDSP-F203-DE000
Broadcom's HDSP-F203-DE000 LED display features COMMON CATHODE configuration, 0.03 A Max Forward Current, and 10.16 mm Display Height. Ideal for applications requiring SMART/NORMAL 7 SEG NUMERIC displays with HIGH EFFICIENCY RED color, operating b/w -40 to 100 °C.
PSC08-11SRWA
Kingbright
16 SEG ALPHANUMERIC LED DISPLAY; Minimum Operating Temperature: -40 Cel; Color: SUPER RED; Display Height: 20.32 mm; Maximum Forward Current: .03 A; Maximum Operating Temperature: 85 Cel;
SA36-11SRWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Maximum Forward Current: .03 A; Additional Features: IC COMPATIBLE; Color: SUPER BRIGHT RED;
DMS-20PC-1-RS-C
Murata Manufacturing
Murata Manufacturing's DMS-20PC-1-RS-C LED display features 0.09A forward current, 9.4mm height, and operates b/w 0°C to 60°C. Ideal for SMART/NORMAL applications requiring a standard red numeric display.
HDSP-5601
HDSP-5601 by Broadcom is a green LED display with a 14.2mm height. It has a common anode configuration and can handle a max forward current of 0.03A. This optoelectronic display is suitable for applications requiring a single digit with decimal point, such as numeric displays in various electronic devices.
HDSM-281F
Broadcom's HDSM-281F is a 7-segment numeric LED display with common anode configuration. It has a max forward current of 0.025A and operates b/w -40°C to 105°C. Ideal for applications requiring a yellow display with 7mm height, such as digital clocks or temperature indicators.
HDSP-F303-DE000
Broadcom's HDSP-F303-DE000 LED display features common cathode configuration, 1 digit with decimal point. With a max forward current of 0.03A, it is ideal for smart/normal 7-segment numeric displays. Operating temperature ranges from -40°C to 100°C, making it suitable for various applications.
LDD-C512RI
Lumex
Lumex LDD-C512RI is a COMMON CATHODE 2-digit LED display with peak wavelength of 568nm. It operates b/w -40°C to 85°C, with max forward current of 0.025A and voltage of 2.6V. Ideal for smart/normal numeric displays in applications requiring green color output and compact design.
TIL392-6
TIL392-6 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has common cathode configuration, 6 characters, and red color at 3mm display height. With max operating temp of 85°C and min of -25°C, it's ideal for applications requiring high visibility and low power consumption.
SA39-11SRWA
Cml Technologies & Kg
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Display Height: 9.9 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; No. of Functions: 1;
HDSP-5621
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 14.2 mm; Color: GREEN; Maximum Forward Current: .03 A; Color At Wavelength: Green;
HDSP-815E
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin (Sn); No. of Functions: 1; Peak Wavelength (nm): 635; Color: HIGH EFFICIENCY RED; Minimum Operating Temperature: -25 Cel;
LDS-HTA512RI
Lumex's LDS-HTA512RI is a 7 SEG NUMERIC LED DISPLAY with COMMON ANODE configuration. It has a display height of 14.2mm, peak wavelength of 565nm, and max forward current of 0.025A. Ideal for applications requiring green color output, with operating temperatures ranging from -40°C to 105°C.
HDSP-4603
HDSP-4603 by Broadcom is a COMMON CATHODE LED Display with 10.92mm height, emitting HIGH PERFORMANCE GREEN light at 566nm wavelength. It operates b/w -40 to 100°C, with a max forward current of 0.03A and voltage of 2.5V, suitable for SMART/NORMAL 7 SEG NUMERIC DISPLAY applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HDSP-2533
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 8; Display Height: 5 mm; Configuration: COMPLEX; Color At Wavelength: Green;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Peak Wavelength (nm): 568; Display Height: 5 mm;
HDSP-2533 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 568nm. It has 8 functions, operates b/w -40°C to 85°C, and features green color at a height of 4.57mm. Ideal for applications requiring complex configurations and high visibility in various environments.
HDSP-2112
HDSP-2112 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 635nm. It operates b/w -45°C to 85°C, featuring high efficiency red color at 5mm height. Ideal for applications requiring complex configurations and up to 8 characters display.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Red; Display Height: 5.08 mm; No. of Functions: 8; Peak Wavelength (nm): 635;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 8; Additional Features: CMOS COMPATIBLE; Configuration: COMPLEX; Color: HIGH EFFICIENCY RED;
HDSP-433G
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 105 Cel; Maximum Forward Voltage: 2.5 V; Minimum Operating Temperature: -40 Cel; No. of Characters: 5;
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Operating Temperature: 105 Cel; No. of Characters: 5; Color At Wavelength: Green;
HDSP-U201
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .03 A; Color At Wavelength: Red; Color: HIGH EFFICIENCY RED; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN SILVER COPPER; Maximum Forward Current: .03 A; Minimum Operating Temperature: -25 Cel; No. of Characters: 1; Display Height: 8 mm;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 1; No. of Functions: 1; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 90 Cel;
HDSP-2113
Broadcom's HDSP-2113 is a 5x7 dot matrix LED display with peak wavelength of 568nm. It operates b/w -45°C to 85°C, featuring green color at 5mm height. Ideal for applications requiring complex configurations and up to 8 characters display.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -45 Cel; Color: HIGH PERFORMANCE GREEN; Additional Features: CMOS COMPATIBLE; Peak Wavelength (nm): 568;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 8; Minimum Operating Temperature: -45 Cel; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e0;
HDSP-2534
HDSP-2534 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 645nm. It has 8 functions, operates b/w -40°C to 85°C, and features red color at a height of 4.57mm. Ideal for applications requiring complex configurations and high visibility in various environments.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Copper (Sn/Cu); Color At Wavelength: Red; Maximum Operating Temperature: 85 Cel; Color: RED; Display Height: 5 mm;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; JESD-609 Code: e0; Maximum Operating Temperature: 85 Cel; Peak Wavelength (nm): 645;
HDSP-U101
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; Display Height: 8 mm; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; No. of Functions: 1;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Color At Wavelength: Red; Maximum Operating Temperature: 90 Cel; Maximum Forward Current: .015 A;
HDSP-U101 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 645nm. It operates at temperatures from -20 to 90 °C and has a max forward current of 0.015A. Ideal for applications requiring a RED display with 8mm height, such as digital clocks or electronic meters.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved