Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Nominal Data Rate: 20 MBps; Maximum Operating Temperature: 110 Cel; Minimum Supply Voltage: 3 V;
Median Price
$2.880
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Arrow
1+ parts
$2.038
100+ parts
$1.456
1k+ parts
-
10k+ parts
Newark
$1.650
$1.550
$1.490
Chip1Stop
$2.982
$1.365
Mouser Electronics
$3.460
$1.980
$1.660
DigiKey
$3.520
$2.017
$1.690
Element14
$4.470
$2.730
$2.510
Farnell
$1.620
RS (Exports)
$2.523
$2.230
Verical
Digiode
$2.833
Nova Conductors
$2.990
Component Electronics Inc.
$4.620
$3.000
Chip Stock
NAC Semi
$1.970
Vyrian
Flip Electronics
IBS Electronics
$3.144
Pegasus Components GmbH
LWI Electronics Inc
Aztec Data Supply Inc.
$0.217
Advanced Electronics
$0.288
$0.262
$0.236
Corohmni
$0.429
Semicontronic
$1.160
$1.131
$1.125
Ampacity Inc.
$2.530
Corphita
$2.684
Aranea Global
$2.930
$2.813
Argo Parts USA
Continental Prestige Electronics
Perfect Parts
SupplyDigital Components
TANS Electronics
Problanco Electronics
Kulean Microsystems
Eastek
Futuretech Components
Authorized Procurement Solutions
Supply Digital
UHIMA Technologies
GreenTree Electronics
Kepictronics
Optocoupler Circuit Outputs FODM8071R2 attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Fairchild Semiconductor
Additional Features:
Configuration:
Nominal Data Rate:
Maximum Forward Current:
Maximum Isolation Voltage:
JESD-609 Code:
No. of Elements:
No. of Functions:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Supply Voltage:
Terminal Finish:
FODM8071R2 Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.80.00
SB
PCN Design/Specification - Logo 17/Aug/2017 Material Change 03/Mar/2023
PCN Assembly/Origin - Mult DEV Mold/Die/Mat 18/Dec/2023
PCN Packaging - Mult Devices 24/Oct/2017
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LM358N
Onsemi
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1554216004
Molex
WIRE AND CABLE;
Grande Electronics
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317LMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
HCPL-2731SD
Fairchild Semiconductor
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; JESD-609 Code: e3; Configuration: SEPARATE, 2 CHANNELS; Maximum Isolation Voltage: 2500 V;
6N137SDM
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Response Time: 100 ns; Minimum Operating Temperature: -40 Cel; Maximum On State Current: .05 A;
HCPL2631SDV
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Forward Current: .03 A; Maximum Isolation Voltage: 2500 V; No. of Functions: 2; Additional Features: CMOS COMPATIBLE, OPEN COLLECTOR, UL RECOGNIZED, VDE APPROVED; Maximum On State Current: .05 A;
HCPL2531SDM
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .025 A; Maximum On State Current: .008 A; Maximum Isolation Voltage: 5000 V; Nominal Data Rate: 1 MBps;
HCPL-0630-500E
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); No. of Functions: 2; Nominal Supply Voltage: 5.5 V; Nominal Response Time: 100 ns;
HCPL2531
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Current Transfer Ratio: 19 %; Configuration: SEPARATE, 2 CHANNELS; Maximum Isolation Voltage: 2500 V;
6N137S(TA)
Everlight Electronics
6N137S(TA) by Everlight Electronics is a single optocoupler with a max forward current of 0.05 A and an isolation voltage of 5000 V. With a response time of 40 ns, it is ideal for logic IC output applications requiring high-speed data transmission at up to 10 MBps in temperatures ranging from -40 to 85°C.
HCPL-2730S
HCPL-2730S by Onsemi is a 2-channel logic IC output optocoupler with separate configuration. It offers a min current transfer ratio of 300%, max isolation voltage of 2500V, and operates b/w -40 to 85°C. Ideal for applications requiring high isolation and signal transmission in harsh environments.
HCPL2531S
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 2500 V; No. of Functions: 2; Maximum Forward Current: .025 A; Configuration: SEPARATE, 2 CHANNELS;
HCPL-2631
Quality Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 70 Cel; Maximum On State Current: .016 A; Nominal Data Rate: 10 MBps; Maximum Forward Current: .015 A;
TLP109(E(T
Toshiba
Toshiba's TLP109(E(T optocoupler features a max forward current of 0.02A, isolation voltage of 3750V, and operating temperature range from -55 to 125°C. Ideal for logic IC output applications requiring high isolation and low on-state current.
ACPL-W21L-000E
Broadcom
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: TIN; JESD-609 Code: e3;
5962-8978501ZA
Defense Logistics Agency's 5962-8978501ZA is a 2-channel optocoupler with built-in resistor. It has a max forward current of 0.01A and operates b/w -55 to 125 °C. Ideal for logic IC output applications, offering high isolation voltage of 1500V and data rate of 0.1 MBps.
6N137
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Data Rate: 10 MBps; No. of Elements: 1; Maximum Forward Current: .015 A;
6N140A/883B#100
Broadcom's 6N140A/883B#100 optocoupler features 4 functions, 0.01 A max forward current, and 200% min current transfer ratio. Ideal for logic IC output applications with a data rate of 0.1 MBps, it operates b/w -55 to 125 °C and offers 1500 V isolation voltage.
HCPL-3180-300E
Broadcom's HCPL-3180-300E is a complex optocoupler with a max forward current of 0.016A and isolation voltage of 3750V. Ideal for logic IC output applications, it operates b/w -40°C to 100°C, making it suitable for various industrial environments.
HCPL-3150-300E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Power Dissipation: .25 W; Maximum Operating Temperature: 100 Cel; Minimum Supply Voltage: 15 V; Nominal Response Time: 500 ns;
HCPL0638R2
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Functions: 2; No. of Elements: 2; Nominal Response Time: 100 ns;
FOD3184SD
FOD3184SD by Onsemi is a single optocoupler with a max forward current of 0.016A and isolation voltage of 5000V. It operates b/w -40 to 100°C, making it suitable for logic IC output applications. With a surface mount feature and matte tin finish, it offers reliable performance in various electronic circuits.
HCPL2530S
HCPL2530S by Onsemi is a logic IC output optocoupler with 2 separate channels. It has a max forward current of 0.025 A and an isolation voltage of 2500 V, making it ideal for high-speed data transmission applications. With a response time of 500 ns and surface mounting feature, this rectangular-shaped optocoupler operates efficiently in temperatures ranging from 0 to 70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FODM8071R2
The Onsemi FODM8071R2 is a single optocoupler with a max forward current of 0.02A and isolation voltage of 3750V. With logic IC output, it operates b/w -40 to 110°C, ideal for high-speed data transmission at 20MBps in surface mount applications.
FODM8071
The Onsemi FODM8071 is a single optocoupler with a max forward current of 0.02 A and an isolation voltage of 3750 V. With a nominal data rate of 20 MBps, it is ideal for logic IC output applications. Operating b/w -40 to 110 °C, this surface mount device has a fast response time of 55 ns.
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: CMOS COMPATIBLE, UL RECOGNIZED; Configuration: SINGLE; JESD-609 Code: e3; Maximum On State Current: .01 A;
FODM452R2
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Configuration: SINGLE;
The Onsemi FODM452R2 is a single optocoupler with a max forward current of 0.025A and isolation voltage of 3750V. Ideal for logic IC output applications, it operates b/w -40 to 85°C, with a min CTR of 15% and data rate of 1MBps.
FODM452R2V
The Onsemi FODM452R2V is a single optocoupler with a max forward current of 0.025A and isolation voltage of 3750V. It operates b/w -40 to 85°C, suitable for logic IC output applications at up to 1MBps data rate in surface mount configurations.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .025 A; Maximum Operating Temperature: 85 Cel; Minimum Current Transfer Ratio: 15 %;
FODM611R2
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Data Rate: 10 MBps; Nominal Response Time: 100 ns; Maximum Isolation Voltage: 3750 V;
FODM611R2 by Onsemi is a single optocoupler circuit output with a max forward current of 0.05 A. It is commonly used in logic IC output applications, offering a nominal data rate of 10 MBps and max isolation voltage of 3750 V.
FODM452
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Voltage: 1.8 V; Maximum Operating Temperature: 85 Cel; Maximum Power Dissipation: .1 W;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 3750 V; No. of Elements: 1; No. of Functions: 1;
FODM453R2V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .025 A; Maximum Power Dissipation: .1 W; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED, VDE APPROVED;
FODM453R2V by Onsemi is a single optocoupler circuit output with a max forward current of 0.025 A. It is commonly used in logic IC output applications, offering a min operating temperature of -40°C and max isolation voltage of 3750 V.
FODM8061R2V
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: MATTE TIN; Maximum Forward Current: .05 A; Minimum Supply Voltage: 3 V; No. of Elements: 1; Additional Features: CMOS COMPATIBLE;
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: MATTE TIN; Nominal Data Rate: 10 MBps; JESD-609 Code: e3; Maximum Forward Current: .05 A; Minimum Operating Temperature: -40 Cel;
FODM453R2
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Configuration: SINGLE; No. of Functions: 1; Maximum Forward Current: .025 A;
The Onsemi FODM453R2 is a single optocoupler with a max forward current of 0.025A and logic IC output type. It operates b/w -40 to 85°C, has an isolation voltage of 3750V, and data rate of 1MBps. Ideal for surface mount applications requiring high isolation and low power dissipation.
FODM453
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Current Transfer Ratio: 15 %; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED; Maximum Operating Temperature: 85 Cel;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Voltage: 1.8 V; Maximum Power Dissipation: .1 W; Maximum Isolation Voltage: 3750 V;
FODM8061
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: CMOS COMPATIBLE, UL RECOGNIZED; Minimum Operating Temperature: -40 Cel; Minimum Supply Voltage: 3 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved