Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 150 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A;
Median Price
$0.080
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.077
100+ parts
$0.073
1k+ parts
10k+ parts
-
Future Electronics
$0.215
$0.119
$0.090
$0.056
Mouser Electronics
$0.280
$0.107
$0.069
$0.051
Distrelec
$0.410
$0.277
$0.144
Rochester
$0.042
$0.035
$0.031
Verical
$0.039
Master Electronics
$0.050
Arrow
Newark
Element14
$0.149
$0.096
Farnell
$0.081
$0.079
DigiKey
$0.052
RS (Exports)
$0.097
$0.068
$0.053
Digiode
$0.032
Nova Conductors
$0.075
TME
$0.260
$0.103
$0.057
$0.045
IBS Electronics
$0.395
$0.230
$0.037
Flip Electronics
NAC Semi
$0.085
Vyrian
VNN
Chip Stock
Cyclops Electronics Ltd
Ampacity Inc.
$0.020
Semicontronic
$0.019
Corohmni
$0.022
Corphita
Aranea Global
$0.070
Argo Parts USA
$0.072
Advanced Electronics
Modulus Dynamics
$0.083
$0.082
Aztec Data Supply Inc.
$0.411
Continental Prestige Electronics
$0.041
Perfect Parts
Kepictronics
SupplyDigital Components
Kulean Microsystems
Authorized Procurement Solutions
Problanco Electronics
Futuretech Components
Glotronic Ltd.
Robosynatics
$0.245
Lucentia Tech
Supply Digital
TANS Electronics
UHIMA Technologies
Small Signal Bipolar Junction Transistors (BJT) BC556BTF attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Fairchild Semiconductor
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
BC556BTF Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.21.00.95
SB
8541.21.00.80
PCN Design/Specification - Copper Lead Frame 12/Oct/2007 Logo 17/Aug/2017
PCN Assembly/Origin - 2Nx/BCx/KSAx/KSPx/MPSx/PNx/SSx 29/Jun/2022
PCN Packaging - Mult Devices 24/Oct/2017
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Taitron Components
JANTX2N2222AUA
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .8 A; No. of Terminals: 4; Terminal Form: NO LEAD;
2N2907A
Siemens
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; JESD-30 Code: O-MBCY-W3; JEDEC-95 Code: TO-18;
BC846B-7-F
Diodes Inc. BC846B-7-F is a NPN BJT transistor with hFE of 200, VCE of 65V, and IC of 0.1A. Ideal for switching applications in small outline packages with Gull Wing terminals. Operates b/w -65 to 150°C, meeting AEC-Q101 standards for automotive use.
2N2905A
NXP Semiconductors
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Case Connection: COLLECTOR;
MMBT3904
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Terminal Position: DUAL;
MMBT2907ALT3G
MMBT2907ALT3G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package and can handle up to 0.6A of collector current. The device operates at temperatures up to 150°C and features a turn-on time of 45ns.
Space Power Electronics
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .6 W; Maximum Collector Current (IC): .6 A;
2N3906
Crimson Semiconductor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A; No. of Elements: 1;
BC846B
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
BC847B
Lite-on Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; No. of Elements: 1;
ULN2003AID
ULN2003AID by Texas Instruments is a NPN transistor with 7 elements and 16 terminals. It has a max collector-emitter voltage of 50V and can handle a collector current of 0.5A. This complex transistor is used for switching applications in surface mount configurations.
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A;
BC846BW-7-F
BC846BW-7-F by Diodes Inc. is a NPN small signal bipolar junction transistor (BJT) with a max collector-emitter voltage of 65V and a max collector current of 0.1A. It is commonly used for switching applications due to its high DC current gain (hFE) of 200 and fast nominal transition frequency (fT) of 300MHz.
MMBT3906LT1HTSA1
Infineon's MMBT3906LT1HTSA1 is a PNP BJT transistor with 30 min hFE, ideal for switching applications. With a max VCE of 40V and IC of 0.2A, it operates up to 150°C. This surface-mount device has a rectangular package style and Gull Wing terminals, meeting AEC-Q101 standards for automotive use.
BC817-25
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .5 A;
JANTX2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Maximum Turn Off Time (toff): 300 ns; Reference Standard: MIL-19500/255T;
BC547-B
BC547-B by Infineon Technologies is a NPN BJT transistor with a min hFE of 200, ideal for switching applications. It has a max IC of 0.1A and can operate at temperatures up to 150°C. The transistor comes in a cylindrical package with through-hole terminals, making it suitable for various electronic circuits.
BC817-40W-7
BC817-40W-7 by Diodes Inc. is a NPN BJT transistor with 170 min hFE, 45V VCEO, and 100MHz fT. Ideal for switching applications, it has a 0.2W power dissipation in a small outline package suitable for surface mount technology.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BC556BTF
BC556BTF by Onsemi is a PNP BJT transistor with a max collector-emitter voltage of 65V and max current of 0.1A. With a min DC current gain of 200, it's ideal for switching applications at up to 150°C operating temperature in through-hole packages.
BC557-B
BC557-B by Infineon Technologies is a PNP BJT transistor with a max power dissipation of 0.625W and min DC current gain of 200. Ideal for switching applications, it has a max collector current of 0.1A and operates at up to 150°C, making it suitable for various electronic circuits.
BC557B
Weitron Technology
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A;
Diotec Semiconductor Ag
Fairchild Semiconductor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 150 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 150 MHz; Maximum Collector Current (IC): .1 A; JEDEC-95 Code: TO-92;
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 320 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
Itt Semiconductor
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 320 MHz; Maximum Power Dissipation (Abs): 1.5 W; Maximum Collector Current (IC): .1 A;
Rectron
General Semiconductor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 150 MHz; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON;
Synsemi
PNP; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 180;
Unisonic Technologies
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
BC556BU
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved