Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Exar's SP339EER1-L is a Line Transceiver IC with 3 functions, operating at 3.3V nominal voltage. It features EIA-232 interface standard, 5-bit receiver, and can handle up to 2.5A output low current. Ideal for industrial applications requiring reliable communication over short distances in harsh environments.
Median Price
$10.518
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
DigiKey
1+ parts
$11.070
100+ parts
$7.394
1k+ parts
$6.735
10k+ parts
$6.656
Mouser Electronics
$11.140
$7.420
$6.730
-
Flip Electronics (Authorized)
Arrow
$7.003
Verical
$9.967
Nova Conductors
$7.545
Bristol Electronics
$10.123
$5.062
Flip Electronics
Chip Stock
Vyrian
Sensible Micro Corp
IBS Electronics
$7.307
$6.746
$6.690
Prism Electronics
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Continental Prestige Electronics
Netroflash
$7.168
$7.017
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Futuretech Components
S.R.D Solutions
Argo Parts USA
Authorized Procurement Solutions
Kepictronics
GreenTree Electronics
Allows for easy and convenient mounting on printed circuit boards, saving space and reducing assembly time.
Supports a wide range of supply voltages, making it versatile for different applications.
Provides multiple integrated functions in a single package, saving on component count and board space.
Square shape helps in efficient placement on PCBs and ensures better thermal management.
Compatible with commonly used power supply voltages, increasing flexibility in system design.
Sufficient number of terminals for connecting various signals and power supplies to the device.
Can operate reliably in high-temperature environments, suitable for industrial applications.
Capable of functioning in extremely low temperatures, making it suitable for a wide range of environments.
Line Drivers & Receivers SP339EER1-L attributes and parameters. Explore more Line Drivers & Receivers devices from Exar
Additional Features:
Differential Output:
Driver No. of Bits:
Maximum High Level Input Current:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Maximum Output Low Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SP339EER1-L Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
Taitron Components
Sensitron Semiconductor
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
ISL3280EIHZ-T
Renesas Electronics
ISL3280EIHZ-T by Renesas Electronics is a Line Receiver IC with 5 terminals, operating at 3.3V nominal voltage. It features EIA-485 and EIA-422 interface standards, with a max receive delay of 60ns. This industrial-grade device is ideal for applications requiring differential Schmitt trigger input characteristics in compact designs.
ADM3101EACPZ-250R7
Analog Devices
ADM3101EACPZ-250R7 by Analog Devices is a CMOS Line Transceiver with 3.3V supply, 5.5V max voltage, and 1.6A output current. Ideal for EIA-232/TIA-232/V.28 interfaces in industrial settings due to its -40 to 85°C operating range and Schmitt trigger input characteristics.
MAX485ECSA-T
Maxim Integrated
MAX485ECSA-T by Maxim Integrated is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates on 5V, has 8 terminals, and offers differential outputs. With a max transmit delay of 60ns, it's ideal for applications requiring fast data transmission in commercial temperature environments up to 70°C.
SN65LBC176DRG4
SN65LBC176DRG4 by Texas Instruments is a Line Driver & Receiver with 5.25V max supply voltage, 25ns max transmit delay, and 33ns max receive delay. Ideal for industrial applications requiring EIA-485-A, TIA-485-A, or ISO 8482 interface standards in a compact small outline package.
MAX485ECSA+
MAX485ECSA+ by Analog Devices is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has a max supply current of 0.9mA, and offers differential outputs. With a small outline package style, it's ideal for applications requiring fast data transmission over short distances.
ISO1430DWR
ISO1430DWR by Texas Instruments is a Line Transceiver with EIA-485-A, TIA-485-A, and EIA-422 interface standards. It operates at 1.71V to 5.5V supply voltage range and has a max transmit delay of 125ns. With a small outline package style, it is ideal for automotive applications requiring differential outputs and Schmitt trigger input characteristics.
MAX256ASA-T
MAX256ASA-T by Maxim Integrated is a line driver with 1 function, operating at a supply voltage range of 3V to 5.5V. It is a small outline, heat sink package suitable for automotive applications.
SN65HVD1780DR
SN65HVD1780DR by Texas Instruments is a line driver/receiver with 3.3/5V power supplies, EIA-485-A interface standard, and 2000ns max transmit delay. Ideal for industrial applications requiring differential output and operating temperatures from -40 to 105°C.
MAX3232CUE+T
MAX3232CUE+T by Analog Devices is a line driver & receiver with a max supply voltage of 5.5V and power supplies of 3.3/5V. It is commonly used in EIA-232 and EIA-562 interface applications due to its CMOS technology and Schmitt trigger input characteristics.
LTC2870IUFD#TRPBF
Linear Technology
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: RECTANGULAR;
SP485CN-L/TR
Maxlinear
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
ADM2587EBRWZ
ADM2587EBRWZ by Analog Devices is a Line Driver & Receiver with 3.3/5 V power supplies, 700 ns max transmit delay, and EIA-485-A interface standard. Ideal for industrial applications requiring differential output and operating temperatures from -40 to 85 °C. Package style is small outline with dual terminals in matte tin finish.
ADM3485EARZ-REEL7
ADM3485EARZ-REEL7 by Analog Devices is a Line Driver & Receiver with 3.6V max supply voltage, 35ns max transmit delay, and 1.5mA max supply current. Ideal for EIA-422/EIA-485 interface standard applications in industrial settings due to its BICMOS technology and differential Schmitt trigger input characteristics.
SP3485EN-L/TR
Exar
Exar SP3485EN-L/TR is a BICMOS line transceiver with EIA-422/EIA-485 interface. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 60ns, it's ideal for industrial applications requiring reliable communication over short distances.
SP330EEY-L
Exar SP330EEY-L is a Line Transceiver with 2 functions, operating at -40 to 85 °C. It supports EIA-485, EIA-422, and EIA-232 interfaces with differential Schmitt trigger input characteristics. Ideal for industrial applications requiring a small outline package with dual terminals and matte tin finish.
MAX485CPA+
MAX485CPA+ by Analog Devices is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates on 5V supply, has 8 terminals, and offers differential output. With a max transmit delay of 60ns, it's ideal for applications requiring fast data transmission in industrial settings.
LTC2862IDD-2#TRPBF
LTC2862IDD-2#TRPBF by Analog Devices is an industrial-grade line transceiver with EIA-422 and EIA-485 interface standards. It operates b/w -40 to 85 °C, with a supply voltage range of 3V to 5.5V. This CMOS technology-based device has a small outline package suitable for applications requiring differential output and Schmitt trigger input characteristics.
ST3232EBDR
ST3232EBDR by STMicroelectronics is a line driver & receiver with 16 terminals. It operates at a max supply voltage of 5.5V and has a max transmit delay of 150ns. It is commonly used in industrial applications requiring EIA-232, TIA-232, V.24, or V.28 interface standards.
MAX232ACPE
MAX232ACPE by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and output polarity is inverted. Widely used in EIA-232-E, TIA-232-E interfaces for data transmission applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SP330EEY-L/TR
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
Exar SP330EEY-L/TR is a 24-terminal line driver/receiver with EIA-485, EIA-422, and EIA-232 interface standards. It operates b/w -40 to 85°C, supporting differential output and input characteristics using a 3.3V nominal voltage. Ideal for industrial applications requiring reliable communication over short distances.
SP335EER1-L/TR
Exar's SP335EER1-L/TR is a Line Transceiver with 2 functions, operating at 3-5.5V. It features EIA-232 interface standard, differential output, and quad terminal position. Ideal for industrial applications requiring reliable data transmission within the -40 to 85°C temperature range.
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
SP335EER1-L
Exar SP335EER1-L is a Line Driver & Receiver IC with 2 functions, operating at 3-5.5V. It features EIA-232 interface standard, differential output, and industrial temperature grade. Ideal for applications requiring high-speed data transmission over long distances in harsh environments.
SP339EER1-L/TR
Exar SP339EER1-L/TR is a 3-function line driver/receiver with 3.465V max supply voltage, suitable for EIA-485/422/232 interfaces. Operating in industrial temperatures (-40 to 85°C), it offers differential outputs, low current of 2.5A, and input characteristics of differential Schmitt trigger. Ideal for applications requiring reliable communication over long distances.
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;
SP334ET-L/TR
Sipex
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
SP334ET-L
SP336EEY-L/TR
Exar's SP336EEY-L/TR is a Line Driver & Receiver with 3.3/5V power supplies, 28 terminals, and 2.5A max output low current. Ideal for industrial applications, it offers differential output, -40 to 85°C operating temp range, and dual terminal position for reliable data transmission in various environments.
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: TSSOP; Package Shape: RECTANGULAR;
SP334ET
Exar SP334ET is a Line Driver & Receiver with 2 functions, operating at 5V. It features a max transmit delay of 120ns and can handle up to 3.2A output low current. Ideal for industrial applications requiring EIA-232/EIA-485 interface standards in a compact small outline package.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved