Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
J & M Industries LLC
Nova Conductors
AZTECH Wire
$13.082
Authorized Procurement Solutions
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Line Drivers & Receivers SP334ET attributes and parameters. Explore more Line Drivers & Receivers devices from Sipex
Additional Features:
Differential Output:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Maximum Output Low Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Transmit Delay:
Width:
SP334ET Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
Bkc Semiconductors
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
ICL3221EIAZ-T7A
Integrated Device Technology
LINE TRANSCEIVER;
MAX3160EEAP
Maxim Integrated
MAX3160EEAP by Maxim Integrated is a Line Driver & Receiver with 20 terminals. It operates at 3-5.5V, has a transmit delay of 800ns, and supports EIA-232/422/485 interfaces. Ideal for industrial applications requiring CMOS technology and differential outputs with low current consumption.
MAX3491EESD+T
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3243EIPWRG4
MAX3243EIPWRG4 by Texas Instruments is a Line Driver & Receiver with 3 functions, operating at 3.3/5V. It has a max supply voltage of 5.5V and operates in industrial temperature range (-40 to 85°C). Ideal for EIA-232-F, TIA-232-F, V.28 interface standards applications.
MAX3221ECAE
MAX3221ECAE by Maxim Integrated is a line driver and receiver with a max supply voltage of 5.5V. It has a small outline, shrink pitch package style and operates at temperatures b/w 0°C to 70°C. This interface IC type is commonly used in EIA-232, TIA-232, V.24, and V.28 applications.
MAX232ACWE
MAX232ACWE by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and can handle up to 10mA supply current. Ideal for EIA-232-E, TIA-232-E, V.28, and V.24 interfaces in commercial temperature grade applications.
ISL83072EIBZA-T
Intersil
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS91M040TSQE/NOPB
DS91M040TSQE/NOPB by Texas Instruments is a Line Driver & Receiver with 4 functions, 3.3V power supply, and 32 terminals. It has a max transmit delay of 5.5ns and operates in industrial temperature range (-40 to 85°C). Ideal for EIA-899; TIA-899 interface standard applications requiring differential input characteristics.
MAX232EEPE
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
MAX3232CSE-T
MAX3232CSE-T by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, operating from 0 to 70°C. It features EIA-232 and EIA-562 interface standards, totem-pole output characteristics, and Schmitt trigger input characteristics. Ideal for commercial applications requiring inverted output polarity and dual terminal position in a small outline package style.
ADM1485ARZ-REEL7
Analog Devices
ADM1485ARZ-REEL7 by Analog Devices is a BICMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has a max supply voltage of 5.25V, and can handle industrial temperature grades. Ideal for applications requiring differential Schmitt trigger input characteristics in communication systems.
MAX3232EIDWG4
MAX3232EIDWG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals and operates at supply voltages of 3.3/5V. It features inverted output polarity, Schmitt trigger input characteristics, and supports EIA-232-F, TIA-232-F, V.28 interface standards. Ideal for industrial applications requiring reliable data transmission over short distances.
THVD2410DR
THVD2410DR by Texas Instruments is a Line Transceiver with 8 terminals, operating at -40 to 125 °C. It features EIA-422-B and EIA-485-A interfaces, with a max supply voltage of 5.5 V. Ideal for automotive applications due to its differential output and Schmitt trigger input characteristics.
MAX3485EESA-T
MAX3485EESA-T by Maxim Integrated is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 35ns, it's ideal for industrial applications requiring fast data transmission over short distances.
ISL3173EIUZ-T
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
DS34LV86TMX/NOPB
DS34LV86TMX/NOPB by Texas Instruments is a 16-terminal line driver with 3.6V supply voltage, operating b/w -40 to 85°C. It features EIA-422-B interface standard, differential output, and 4-bit receiver for industrial applications requiring high-speed data transmission.
LT1785IS8#PBF
LT1785IS8#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at -40 to 85 °C. It has a max supply voltage of 5.25 V and differential output characteristics. Ideal for EIA-422/EIA-485 interfaces in industrial applications due to its small outline package and dual terminal position.
AM26LV32EIRGYRG4
AM26LV32EIRGYRG4 by Texas Instruments is a 16-terminal line driver with 3.6V max supply voltage, operating at -40 to 85°C. It features EIA-422-B interface standard, differential Schmitt trigger input characteristics, and quad terminal position. Ideal for industrial applications requiring reliable signal transmission over short distances.
DS26C32ATMX/NOPB
National Semiconductor
LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ISL3330IAZ
Renesas Electronics
ISL3330IAZ by Renesas Electronics is a Line Driver & Receiver with 2 functions, operating at 3.15-3.45V. It features EIA-232 interface standard, BICMOS technology, and Schmitt trigger input characteristics. Ideal for industrial applications requiring reliable communication over short distances.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SP330EEY-L/TR
Maxlinear
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
Exar
Exar SP330EEY-L/TR is a 24-terminal line driver/receiver with EIA-485, EIA-422, and EIA-232 interface standards. It operates b/w -40 to 85°C, supporting differential output and input characteristics using a 3.3V nominal voltage. Ideal for industrial applications requiring reliable communication over short distances.
SP335EER1-L/TR
Exar's SP335EER1-L/TR is a Line Transceiver with 2 functions, operating at 3-5.5V. It features EIA-232 interface standard, differential output, and quad terminal position. Ideal for industrial applications requiring reliable data transmission within the -40 to 85°C temperature range.
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
SP335EER1-L
Exar SP335EER1-L is a Line Driver & Receiver IC with 2 functions, operating at 3-5.5V. It features EIA-232 interface standard, differential output, and industrial temperature grade. Ideal for applications requiring high-speed data transmission over long distances in harsh environments.
SP330EEY-L
Exar SP330EEY-L is a Line Transceiver with 2 functions, operating at -40 to 85 °C. It supports EIA-485, EIA-422, and EIA-232 interfaces with differential Schmitt trigger input characteristics. Ideal for industrial applications requiring a small outline package with dual terminals and matte tin finish.
SP339EER1-L/TR
Exar SP339EER1-L/TR is a 3-function line driver/receiver with 3.465V max supply voltage, suitable for EIA-485/422/232 interfaces. Operating in industrial temperatures (-40 to 85°C), it offers differential outputs, low current of 2.5A, and input characteristics of differential Schmitt trigger. Ideal for applications requiring reliable communication over long distances.
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;
SP334ET-L/TR
Sipex
SP334ET-L
SP336EEY-L/TR
Exar's SP336EEY-L/TR is a Line Driver & Receiver with 3.3/5V power supplies, 28 terminals, and 2.5A max output low current. Ideal for industrial applications, it offers differential output, -40 to 85°C operating temp range, and dual terminal position for reliable data transmission in various environments.
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: TSSOP; Package Shape: RECTANGULAR;
SP334ET
Exar SP334ET is a Line Driver & Receiver with 2 functions, operating at 5V. It features a max transmit delay of 120ns and can handle up to 3.2A output low current. Ideal for industrial applications requiring EIA-232/EIA-485 interface standards in a compact small outline package.
SP334CT-L/TR
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved