Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SCR; Surface Mount: NO; Maximum DC Gate Trigger Voltage: 2 V; Nominal Circuit Commutated Turn-off Time: 300 us; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Silicon Controlled Rectifiers (SCR) T1900N28TOC attributes and parameters. Explore more Silicon Controlled Rectifiers (SCR) devices from Eupec & Kg
Nominal Circuit Commutated Turn-off Time:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
Maximum Leakage Current:
Non Repetitive Peak On-state Current:
Maximum On-state Voltage:
Maximum On-state Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Trigger Device Type:
T1900N28TOC Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
Formosa Microsemi
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MCC162-16IO1
IXYS Corporation
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Case Connection: ISOLATED;
M50-100-1-2-F-V
Sensata Technologies
The Sensata Technologies M50-100-1-2-F-V is a Silicon Controlled Rectifier with 150 mA DC Gate Trigger Current and 1500 A Non Repetitive Peak On-state Current. It features a common cathode configuration, suitable for applications requiring up to 100 A Max On-state Current. The device operates in temperatures ranging from -40°C to 125°C, making it ideal for various industrial and power control systems.
CS20-16IO1
Littelfuse
CS20-16IO1 by Littelfuse is a single SCR with max DC gate trigger current of 65mA, non-repetitive peak on-state current of 220A, and max RMS on-state current of 30A. Ideal for applications requiring high voltage control such as industrial power supplies or motor drives due to its max repetitive peak reverse voltage of 1600V and package style (meter) being flange mount.
JANTX2N2324AS
Vpt Components
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Terminals: 3;
2N6565
Harris Semiconductor
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 400 V; Maximum Operating Temperature: 125 Cel; Maximum DC Gate Trigger Voltage: 1.2 V; Non Repetitive Peak On-state Current: 6 A;
MCC162-16IO1 by Littelfuse is a SERIES CONNECTED SCR with 2 elements. It has a Max On-state Current of 300A and Repetitive Peak Reverse Voltage of 1600V. Ideal for applications requiring high current handling and voltage regulation in industrial settings.
MCMA265P1600KA
MCMA265P1600KA by Littelfuse is a 2-element SCR with 1600V repetitive peak reverse voltage and 421A max RMS on-state current. It is used in applications requiring high power control, such as industrial motor drives and power supplies. The package style is flange mount with ceramic-metal sealed co-fired body material.
BT151-500R
Philips Semiconductors
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 500 V; Maximum On-state Voltage: 1.7 V; Nominal Circuit Commutated Turn-off Time: 70 us; Minimum Critical Rate of Rise of Off-state Voltage: 50 V/us;
C106D1
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 400 V; Minimum Operating Temperature: -40 Cel; Maximum Leakage Current: .1 mA; Maximum DC Gate Trigger Current: .2 mA;
2N683A
2N683A by Texas Instruments is a Silicon Controlled Rectifier with 40mA DC Gate Trigger Current, 250A Non Repetitive Peak On-state Current, and 18A Max On-state Current. It operates b/w -60 to 125 °C and has a max DC Gate Trigger Voltage of 3V. Ideal for applications requiring precise current control in electronic circuits.
SKKH92/08E
Semikron International
SKKH92/08E by Semikron is a single SCR with built-in diode, featuring 2000A non-repetitive peak on-state current and 95A max on-state current. Ideal for applications requiring high power control such as industrial motor drives or power supplies.
2N690
New Jersey Semiconductor Products
SCR; Package Style (Meter): POST/STUD MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ANODE;
MCD40-12IO6
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE WITH BUILT-IN SERIES DIODE; Case Connection: ISOLATED;
MCR12DCMT4G
SCR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ANODE;
MCC26-12IO8B
70TPS16PBF
International Rectifier
SCR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Minimum Critical Rate of Rise of Off-state Voltage: 500 V/us;
VS-50RIA120
VS-50RIA120 by Vishay Intertechnology is a 1200V SCR with max. DC gate trigger current of 100mA and max. RMS on-state current of 80A. Ideal for applications requiring high power control in industrial settings due to its robust construction and wide operating temperature range from -40°C to 125°C.
2N1847B
2N1847B by Texas Instruments is a Silicon Controlled Rectifier with 75mA DC Gate Trigger Current, 150A Non Repetitive Peak On-state Current, and 13A Max On-state Current. It operates b/w -65°C to 125°C and has a max DC Gate Trigger Voltage of 3.5V. Ideal for applications requiring precise current control in electronic circuits.
TIC126B
TIC126B by Texas Instruments is a single SCR with max. on-state current of 12A, trigger voltage of 1.5V, and max. DC gate trigger current of 20mA. It is used in applications requiring high power control such as motor speed control and lighting dimming due to its high non-repetitive peak on-state current capability of 100A.
SKKH106/12E
SKKH106/12E by Semikron International is a Silicon Controlled Rectifier with a max on-state current of 106A and non-repetitive peak on-state current of 2300A. It features a max DC gate trigger voltage of 3V, making it suitable for applications requiring high power switching in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Eupec & Kg
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved