Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Edac 395-072-520-407 is a CARD EDGE CONNECTOR with 72 contacts, 0.1" pitch, and 3A signal rating. It features POLYETHYLENE/POLYESTER insulation, GOLD OVER NICKEL finish, and operates b/w -40 to 105 °C. Ideal for board mounting applications requiring high contact resistance and UL certification.
Median Price
$10.780
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
AZTECH Wire
$1.340
$1.290
$1.260
$1.240
Aztec Data Supply Inc.
$8.620
Continental Prestige Electronics
$10.564
Netroflash
Argo Parts USA
Having a small mating contact pitch allows for high density connections, making this product suitable for applications requiring a large number of connections in a limited space.
The long body length provides ample space for multiple contacts, making it suitable for applications that require a large number of connections.
High insulation resistance ensures minimal leakage current and reliable performance in various environmental conditions.
The high dielectric voltage rating ensures safe operation and protection against voltage spikes in the application.
Tin with Nickel barrier provides excellent corrosion resistance and reliable solder connections for long-term performance.
Board mounting type allows for easy installation and secure connection to the PCB, ensuring stability and reliability in operation.
Copper alloy contacts offer high conductivity, low contact resistance, and durability, providing reliable signal transmission in the application.
The high maximum operating temperature allows for use in applications where elevated temperatures are present, ensuring reliability under harsh conditions.
Headers & Edge Type Connectors 395-072-520-407 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Edac
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Filter Feature:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
395-072-520-407 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Established in 1966, EDAC soon became a world leader in providing connectors for Card Edge and Rack & Panel applications. Since then, we have expanded our product offering to include one of the widest ranges of interconnect solutions in the world. Products include D-Sub, RJ45, USB & Firewire, Waterproof, PLCC Sockets, Pin Headers, Cable Assemblies and Custom Solutions. Our innovation guides us into new customer opportunities as we challenge the status quo. This belief resonates throughout the organization and results in exceptional quality service globally. GLOBAL IMPACT- MARKET SERVED EDAC makes some of the most complex and innovative interconnect products in the world. Recognized as a global leader, EDAC provides design, manufacturing and logistics solutions, delivering superior quality and customer service to global distribution channels and Original Equipment Manufacturers (OEMs) in computing and storage, medical, aerospace, industrial, communications networks, consumer and clean technology sectors. OUR SERVICE We have an extensive Global customer support system that includes dedicated inside sales service, highly trained field support, and a global distributor and representative network that can co-ordinate the delivery of EDAC products to any factory in any country and proactively resolve any issues in a timely manner.
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
Shandong Yiguang Electronic Joint Stock
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Won-top Electronics
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
Sangdest Microelectronics (Nanjing)
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
EHR-3
J S T Mfg
EHR-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.098" pitch, 0.15"x.28" body size, and UL 94V-0 flammability rating. It is used for cable mounting with female contacts terminated via crimping, ideal for electronic applications requiring compact and reliable connections.
FTSH-105-01-F-DV-K-P-FR
Samtec
The Samtec FTSH-105-01-F-DV-K-P-FR is a 2-row, 10-contact male board connector with tin finish and nickel barrier. It has a terminal pitch of 1.27mm and UL flammability rating of 94V-0. Ideal for surface mount applications in electronics requiring high-density connections.
53047-1010
Molex
Molex 53047-1010 is a board connector with 10 contacts, 0.049" pitch, and 0.561" body length. Ideal for commercial applications, it features polarized housing, solder termination, and UL94V-0 flammability rating.
61300811121
Wuerth Elektronik & Kg
61300811121 by Wurth Elektronik is a BOARD CONNECTOR with 8 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and can withstand up to 500VAC. Ideal for commercial applications, this connector operates b/w -40°C to 125°C on PCBs with a rectangular contact pattern.
51103-0400
The Molex 51103-0400 is a board connector with 4 contacts, 0.098" pitch, and POLYBUTYLENE TEREPHTHALATE insulator. It operates b/w -40 to 105 °C, has a dielectric voltage of 1400VAC, and is UL94V-0 rated. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
22-03-2021
Molex 22-03-2021 is a board connector with mating contact pitch of 0.1", insulation resistance of 50000000000 ohm, and dielectric voltage of 1500VAC. It has a male contact gender, rated current of 4A for signal transmission, and is suitable for commercial applications requiring durable connections on PCBs.
684-4151-0-51
Hirose Electric
The Hirose Electric 684-4151-0-51 is a board stacking connector with 100 contacts, 0.016" mating contact pitch, and 50000000 ohm insulation resistance. It is used in applications requiring a durable, polarized housing with liquid crystal polymer insulator material for PCB mounting at temperatures ranging from -35 to 85 °C.
SHF-105-01-L-D-SM-LC-TR
BOARD CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
FTSH-107-01-L-DV-K-A-P
Samtec's FTSH-107-01-L-DV-K-A-P is a 2-row, 14-contact board connector with a terminal pitch of 1.27mm. It has a temperature range of -55 to 125°C and is suitable for surface mount applications in headers and edge type connectors.
475532001
PCB CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
B2PS-VH-GU
B2PS-VH-GU by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 3.96mm and is ideal for right angle mounting on boards. This connector is suitable for applications requiring male contact gender and UL 94V-0 flammability rating.
PAP-03V-S
PAP-03V-S by J S T Mfg is a 3-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE CRIMP termination and CABLE mounting, making it ideal for various applications requiring secure cable connections.
XHP-3
XHP-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.098" pitch, suitable for CABLE mounting. Featuring POLYAMIDE6 insulator and UL94V-0 flammability rating, it operates b/w -25 to 85°C. With 1000VAC dielectric voltage and 3A signal current, it's ideal for applications requiring FEMALE SQ PIN-SKT contacts.
76384-303LF
Amphenol Communications Solutions
Amphenol 76384-303LF is a board connector with 0.1" pitch, suitable for commercial applications. Features include 3A signal current, -40 to 125°C operating range, and UL94V-0 flammability rating. Ideal for PCB mounting with solder termination and polarized housing design.
78171-0004
Molex 78171-0004 is a board connector with 0.047" pitch, suitable for applications requiring 1.5A signal current. Featuring gold nickel finish and liquid crystal polymer insulator, it offers durability of 10 cycles. With a temperature range of -25 to 85°C, this male connector has a total of 4 contacts and is UL certified for reliability in commercial settings.
BM04B-GHS-TBT(LF)(SN)(N)
BM04B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, 0.049" pitch, and 100000000 ohm insulation resistance. It has POLYAMIDE9T insulator material, operates b/w -25 to 85 °C, and features TIN/CU termination finish. Ideal for applications requiring a male contact gender in surface mount configuration with a rectangular PCB contact pattern.
22-29-2041
The Molex 22-29-2041 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a dielectric voltage of 1500VAC and insulation resistance of 5000000000 ohm. With a rated current of 2.5A, this connector has a red insulator color and uses matte tin over nickel termination finish.
851-43-045-10-011000
Mill-max Mfg
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
2-1761603-3
TE Connectivity 2-1761603-3 is a dual-row board connector with 10 contacts, rated at 1A. It features a contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
FTSH-105-01-L-DV-K
Samtec's FTSH-105-01-L-DV-K is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, straight-mount male connector with surface mount termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
395-020-520-812
Edac
Edac 395-020-520-812 is a 20-contact card edge connector with 0.1" pitch, suitable for PCBs. Featuring gold over nickel mating contact finish and copper alloy contacts, it offers high insulation resistance of 5Gohm and UL94V-0 flammability rating. With operating temperatures from -40 to 105°C, it's ideal for various electronic applications.
395-096-520-288
The Edac 395-096-520-288 is a CARD EDGE CONNECTOR with a Mating Contact Pitch of 0.1 inch and a Total No. of 96 Contacts. It is commonly used in PCB applications, offering a high Insulation Resistance of 5Gohm and a Dielectric Withstanding Voltage of 1697VAC.
395-016-556-512
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1697VAC; No. of Connectors: ONE; Body Length: 1.635 inch;
395-022-525-858
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1697VAC; No. of Connectors: ONE; Terminal Pitch (mm): 2.54;
395-040-525-204
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1697VAC; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
395-020-520-202
Edac 395-020-520-202 is a 20-contact card edge connector with 0.1" pitch, suitable for PCB mounting. Featuring gold over nickel mating contact finish and UL flammability rating of 94V-0, it offers high insulation resistance of 5Gohm and operates b/w -40 to +105°C. Ideal for applications requiring reliable signal transmission at up to 3A current.
395-020-520-488
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1697VAC; No. of Connectors: ONE; Minimum Withdrawal Force (N): 0.28;
395-013-541-488
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1697VAC; No. of Connectors: ONE; Termination Type: WIRE WRAP;
395-053-541-488
395-060-523-688
The Edac 395-060-523-688 is a CARD EDGE CONNECTOR with a Mating Contact Pitch of 0.1 inch and a Body Length of 6.835 inch. It is commonly used in applications requiring high insulation resistance and a wide operating temperature range (-40 to +105 °C).
395-019-520-478
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1697VAC; No. of Connectors: ONE; Total No. of Contacts: 19;
395-062-542-508
Edac 395-062-542-508 is a Card Edge Connector with 62 contacts, rated at 3A signal current. It features a contact pitch of 0.1", insulation resistance of 5Gohm, and operates b/w -40°C to 105°C. Ideal for applications requiring high mating contact finish and UL flammability compliance.
395-010-520-101
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1697VAC; No. of Connectors: ONE; Insulator Material: POLYETHYLENE/POLYESTER;
395-012-521-504
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1697VAC; No. of Connectors: ONE; Body Width: .37 inch;
395-020-555-201
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1697VAC; No. of Connectors: ONE; Body Length: 1.26 inch;
395-012-520-112
Edac 395-012-520-112 is a CARD EDGE CONNECTOR with 12 contacts, 0.1" pitch, and 3A signal rating. It has a dielectric voltage of 1697VAC, operating from -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and low contact resistance.
395-012-521-502
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1697VAC; No. of Connectors: ONE; No. of PCB Rows: 2;
395-012-521-804
The Edac 395-012-521-804 is a CARD EDGE CONNECTOR with a Mating Contact Pitch of 0.1 inch, Insulation Resistance of 5G ohm, and Dielectric Withstanding Voltage of 1697VAC. It is commonly used in PCB applications for its high temperature resistance (up to 105°C) and reliable signal current rating of 3A.
395-012-540-112
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1697VAC; No. of Connectors: ONE; No. of Rows Loaded: 1;
395-072-520-288
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1697VAC; No. of Connectors: ONE; Insulator Color: BLACK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved