Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
INTERFACE CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 30; Package Code: HVQCCN; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): NOT SPECIFIED;
Median Price
$2.135
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.670
100+ parts
$0.990
1k+ parts
$0.867
10k+ parts
$0.750
Mouser Electronics
$2.600
$1.150
$0.840
Chip Stock
-
Sensible Micro Corp
Kepictronics
RC Electronics
$0.940
$0.860
$0.830
Authorized Procurement Solutions
Other Function Interface ICs PI3EQX12902AZLEX attributes and parameters. Explore more Other Function Interface ICs devices from Diodes Incorporated
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
PI3EQX12902AZLEX Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Revision 27/May/2021
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
Good-ark Electronics
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Panjit International
C1210C104K5RACTU
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
ISO7741FQDWRQ1
Texas Instruments
ISO7741FQDWRQ1 by Texas Instruments is a 16-terminal IC with 4 functions, operating at -40 to 125°C. It features a supply voltage range of 2.25-5.5V and is AEC-Q100 compliant for automotive applications. With CMOS technology, it offers a compact design in small outline package suitable for surface mount assembly.
ISO7741FDW
ISO7741FDW by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -55 to 125 °C. It features a supply voltage range of 2.25-5.5 V and uses CMOS technology. Ideal for military-grade applications requiring interface circuitry in compact spaces.
ISO7760FQDBQQ1
ISO7760FQDBQQ1 by Texas Instruments is a digital isolator with 6 channels, operating at -40 to 125°C. It has a supply voltage range of 2.25-5.5V and is AEC-Q100 qualified for automotive applications. The IC features a small outline package with dual terminals and CMOS technology, suitable for surface mount assembly in automotive electronics.
CY8CMBR3002-SX1I
Cypress Semiconductor
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ISO7742DBQR
ISO7742DBQR by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 2.25-5.5 V and uses CMOS technology. This interface circuit in a small outline package is ideal for military-grade applications requiring high reliability and dual terminal positions.
MAX13035EETE+T
Analog Devices
MAX13035EETE+T by Analog Devices is a 16-terminal interface IC with BICMOS technology. It operates b/w -40 to 85 °C, with supply voltages of 1.62-3.6 V. Ideal for industrial applications requiring a compact chip carrier package style and matte tin terminal finish.
ADUM1250SRZ-RL7
ADUM1250SRZ-RL7 by Analog Devices is an 8-terminal interface IC with a supply voltage range of 3V to 5.5V, operating b/w -40°C to 125°C. It features a small outline package style and matte tin terminal finish, making it suitable for automotive applications requiring reliable signal isolation and communication interfaces.
ISO7221CD
ISO7221CD by Texas Instruments is a dual-channel interface IC with CMOS technology. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 2.8V to 5V and compact dimensions of 4.905mm x 3.895mm, it offers reliable signal isolation in small outline packages for surface mount assembly.
ADUM6401ARWZ-RL
ADUM6401ARWZ-RL by Analog Devices is a digital isolator with 16 terminals, operating b/w -40 to 105°C. It has a supply voltage range of 3V to 5.5V and comes in a small outline package suitable for surface mount applications. Ideal for use in systems requiring high noise immunity and signal isolation.
PCA9517AD,118
NXP Semiconductors
PCA9517AD,118 by NXP Semiconductors is an 8-terminal interface IC with a supply voltage range of 0.9V to 5.5V and operating temperature from -40°C to 85°C. It features a small outline package style suitable for industrial applications requiring CMOS technology and dual terminal position for nickel palladium gold finish.
MAX14591ETA+T
MAX14591ETA+T by Analog Devices is an 8-terminal IC with a supply voltage range of 0.9V to 5.5V, suitable for industrial applications. It features a small outline package style, dual terminal position, and BICMOS technology. With a temperature range of -40°C to 85°C, it is ideal for interface circuit applications requiring precise control in harsh environments.
ADUM4160BRWZ
ADUM4160BRWZ by Analog Devices is a small outline interface IC with 16 terminals and a max seated height of 2.65 mm. It has a temperature grade of industrial and uses CMOS technology. This IC is commonly used in various applications requiring an interface circuit for other functions.
ADUM2402ARWZ
ADUM2402ARWZ by Analog Devices is a small outline interface IC with 16 terminals. It operates at a supply voltage range of 2.7V to 5.5V and has an industrial temperature grade of -40°C to 105°C. This IC is commonly used in various applications requiring interface circuitry.
ISO7740FDBQR
ISO7740FDBQR by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 2.25-5.5 V and uses CMOS technology. This interface circuit in small outline package is ideal for military applications requiring high reliability and dual terminal position.
ADUM4166BRIZ
ADUM4166BRIZ by Analog Devices is a 20-terminal interface IC with CMOS technology. It operates b/w -55 to 125 °C, with supply voltage range of 3-3.6 V. This small outline package is ideal for applications requiring surface mount and dual terminal position configurations.
TXB0104DRG4
TXB0104DRG4 by Texas Instruments is a 4-bit interface IC with 3-STATE output, operating at -40 to 85°C. It features a max supply voltage of 5.5V and terminal pitch of 1.27mm, suitable for industrial applications requiring true output polarity control in compact designs.
SI8641BD-B-IS2R
Silicon Labs
SI8641BD-B-IS2R by Silicon Labs is a digital isolator with 4 functions, operating at -40 to 125 °C. It has a supply voltage range of 2.375V to 5.5V and comes in a small outline package for various interface applications.
HCPL-0931-000E
Broadcom
Broadcom's HCPL-0931-000E is a digital isolator with 8 terminals, operating b/w -40 to 100°C. It has a supply voltage range of 3V to 5.5V and uses CMOS technology. This small outline IC is ideal for industrial applications requiring surface mount compatibility and dual terminal position.
PM8805TR
STMicroelectronics
PM8805TR by STMicroelectronics is a 43-terminal interface IC in a square chip carrier package. With a compact size of 8x8mm and max seated height of 1mm, it's ideal for applications requiring a small footprint. This IC is designed for surface mount assembly, making it suitable for various electronic devices.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PI3EQX10612ZLCEX
Diodes Incorporated
INTERFACE CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: RECTANGULAR; Maximum Operating Temperature: 70 Cel;
PI3EQX7841ZDEX
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
Pericom Semiconductor
PI3EQX7502AIZDEX
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
PI3EQX6801ZDEX
PI3EQX2024ZTFEX
INTERFACE CIRCUIT;
PI3EQX10908A
PI3EQX7502MZDEX
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Shape: SQUARE; No. of Functions: 1;
PI3EQX1204-CZHEX
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 42; Package Code: HVQCCN; Package Shape: RECTANGULAR;
PI3EQX501IZAE
INTERFACE CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Minimum Supply Voltage: 3 V;
PI3EQX501IZAEX
INTERFACE CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Maximum Seated Height: .8 mm;
PI3EQX6801ZDE
PI3EQX16612ZLDEX
INTERFACE CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: RECTANGULAR;
PI3EQX7502AIZDE
PI3EQX1204-CZHE
PI3EQX5801ZDE
PI3EQX4951STZDE
INTERFACE CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
PI3EQX5801ZDEX
PI3EQX1204-BZHE
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved