Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BCR402UW6-7 by Diodes Inc. is a graphics display driver with a max supply voltage of 40V, AEC-Q101 screening level, and 8 terminals in a small outline package. It is designed for LED display driver applications requiring a nominal voltage of 10V, with dual terminal position and gull wing form factor for compact designs.
Median Price
$0.176
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Arrow
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.105
Verical
$0.198
Farnell
$0.155
$0.131
$0.107
Element14
$0.277
$0.229
$0.210
Nova Conductors
$0.153
Chip Stock
Vyrian
Rutronik
$0.080
VNN
Ampacity Inc.
$0.084
Semicontronic
$0.082
$0.081
Argo Parts USA
$0.148
Advanced Electronics
$0.162
$0.152
Aztec Data Supply Inc.
$2.000
Corohmni
$6.857
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
$10.637
$10.420
Lixinc
Continental Prestige Electronics
$0.124
$0.109
Glotronic Ltd.
Netroflash
$0.150
$0.145
$0.142
Perfect Parts
GreenTree Electronics
Plastic/epoxy material is lightweight and durable, making the product suitable for various applications without adding unnecessary weight.
Surface mount design allows for easy and efficient installation, saving time and effort during assembly.
High maximum supply voltage capability ensures compatibility with a wide range of power sources, providing flexibility in usage.
AEC-Q101 screening level indicates that the product has undergone rigorous testing for automotive applications, ensuring high reliability and performance under demanding conditions.
Rectangular package shape is space-efficient and allows for easy integration within electronic devices or systems.
Having 8 terminals provides multiple connection points, enabling effective communication and control within a circuit.
Small outline, low profile, and shrink pitch package style saves space and allows for compact design layouts, ideal for applications where size is a concern.
Matte tin terminal finish ensures good conductivity and resistance to corrosion, enhancing the product's lifespan and performance.
Dual terminal position provides redundancy and connection options, offering flexibility and reliability in circuit connectivity.
Low maximum seated height allows for a slim and sleek profile, making the product suitable for compact electronic designs.
Narrow width dimension enables the product to fit in tight spaces or crowded circuit boards, enhancing overall design flexibility.
Short maximum time at peak reflow temperature ensures quick and efficient soldering processes, reducing production time and costs.
High peak reflow temperature capability allows for reliable soldering and bonding of the product, ensuring stable operation under various temperature conditions.
Compact length dimension contributes to the overall small footprint of the product, making it suitable for space-constrained applications.
Gull wing terminal form provides secure and stable connections, minimizing the risk of disconnection or signal loss in operation.
Stable nominal supply voltage of 10 V ensures consistent and reliable power delivery, supporting the product's performance requirements.
Having 2 segments allows for independent control or display of different information, enhancing the product's versatility and functionality.
Narrow terminal pitch of 0.95 mm provides precise and compact connection points, allowing for densely packed designs and efficient signal transmission.
LED display driver interface IC type ensures compatibility with LED display modules, enabling seamless integration and control of LED-based visual outputs.
Graphics Display Drivers BCR402UW6-7 attributes and parameters. Explore more Graphics Display Drivers devices from Diodes Incorporated
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
BCR402UW6-7 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev A/T Site 31/Mar/2021
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Promax-johnton
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
ROHM
Yangzhou Yangjie Electronics
LT3496EUFD#TRPBF
Analog Devices
LT3496EUFD#TRPBF by Analog Devices is a graphics display driver with a max supply voltage of 30V. It has a parallel data input mode and is surface mountable. This LED display driver is commonly used in applications requiring high-resolution graphics displays.
MAX6955AAX+
MAX6955AAX+ by Analog Devices is a Graphics Display Driver with 16-DIGIT display, 7 segments, and 8 MHz min fmax. It operates in automotive grade temperature range and uses CMOS technology. Ideal for LED display driver applications due to its serial data input mode and segment display capability.
PTPS929120QPWPRQ1
Texas Instruments' PTPS929120QPWPRQ1 is a Graphics Display Driver with 24 terminals, operating temperature range of -40 to 125 °C. It supports LED displays, has serial data input mode, and is AEC-Q100 compliant for automotive applications.
LM3914N
National Semiconductor
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
MAX6964AEG+
Maxim Integrated
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR;
MAX20090ATP/VY+
LED DISPLAY DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn) - annealed;
TLC5916INE4
TLC5916INE4 by Texas Instruments is a LED display driver with 8 segments, operating at 3-5.5V. It features constant-current output, serial data input mode, and a max supply current of 22mA. Ideal for automotive applications due to its temperature grade and through-hole terminal form.
LP55231SQX/NOPB
LP55231SQX/NOPB by Texas Instruments is a graphics display driver with 9 channels, constant-current output, and serial data input mode. It operates b/w -30 to 85 °C with supply voltage range of 2.7-5.5 V. Ideal for LED displays, it features a compact square package style suitable for surface mount applications.
TLC59116IRHBR
TLC59116IRHBR by Texas Instruments is a graphics display driver with 16 channels, constant-current output, and serial data input mode. It operates b/w -40 to 85 °C and has a max supply voltage of 5.5 V. Ideal for LED display applications due to its compact chip carrier package style and industrial temperature grade suitability.
TLC5916IPW
TLC5916IPW by Texas Instruments is a graphics display driver with 16 terminals, operating at -40 to 125 °C. It features constant-current output, serial data input mode, and supports segment display mode. Ideal for automotive applications due to its small outline package style and nickel palladium gold terminal finish.
NCP3065DR2G
NCP3065DR2G by Onsemi is a LED display driver with 40V max supply voltage, -40 to 125°C operating temp range, and 1.27mm terminal pitch. Ideal for automotive applications due to its small outline package style and dual terminal position.
HVLED807PFTR
STMicroelectronics
HVLED807PFTR by STMicroelectronics is a LED display driver with 16 terminals, operating at 14V. It features Gull Wing terminals and a small outline package shape, suitable for surface mount applications. Ideal for graphics displays requiring a nominal voltage of 14V.
CL88031T-E/MF
Microchip Technology
CL88031T-E/MF by Microchip: LED display driver with 14 segments, 10 terminals, and true output polarity. Ideal for automotive applications with a temperature range of -40 to 125°C. Operates on supply voltage b/w 10-12V in small outline package style.
MAX6958BAEE+
MAX6958BAEE+ by Analog Devices is a Graphics Display Driver with 4-DIGIT display, CMOS technology, and LED DISPLAY DRIVER interface. It operates in SEGMENT mode with SERIAL data input for automotive applications. The package is small outline, surface mountable, and supports a supply voltage range of 3-5V.
MBI5324GLQ
Macroblock
MBI5324GLQ by Macroblock is a 48-terminal LED display driver with serial data input mode. It features constant-current output, Schmitt trigger input characteristics, and operates at a nominal voltage of 3.3V. Ideal for driving LED displays in various applications due to its low profile flatpack package style and quad terminal position.
PCA9635PW-T
NXP Semiconductors
PCA9635PW-T by NXP Semiconductors is a serial LED display driver with 16 segments. Operating voltage range of 2.3V to 5.5V, suitable for industrial temperature grades. Small outline package with 28 terminals, ideal for graphics display applications.
NSI50010YT1G
NSI50010YT1G by Onsemi is a small outline LED display driver with 2 terminals, matte tin finish, and gull wing terminal form. It has a peak reflow temperature of 260°C and is suitable for graphics display applications requiring compact design and surface mount technology.
FAN5702UMP15X
FAN5702UMP15X by Onsemi is a SERIAL graphics display driver with 16 terminals, operating voltage range of 2.7V to 5.5V, and industrial temperature grade up to 85°C. Ideal for LED display driver applications due to its compact square package style and low power consumption at 0.4 MHz frequency.
ZXLD1362ET5TA
Zetex Plc
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR;
CAV4109V-GT2
CAV4109V-GT2 by Onsemi is a graphics display driver with 16 terminals and a small outline package style. It operates at a supply voltage range of 3-5.5 V and has an industrial temperature grade. This LED display driver is suitable for applications requiring parallel data input mode and can handle up to 10 mA of max supply current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BCR420UE6327HTSA1
Infineon Technologies
BCR420UE6327HTSA1 by Infineon Technologies is a LED display driver with 6 terminals in a small outline package. It features gull wing terminal form, AEC-Q101 screening level, and tin finish. Ideal for applications requiring compact design and high reliability in automotive electronics.
BCR402UE6327HTSA1
BCR402UE6327HTSA1 by Infineon Technologies is a LED display driver with 6 terminals in a small outline package. It operates at 10V nominal voltage, with terminal pitch of 0.95mm and gull wing terminal form. Ideal for graphics display applications due to its compact size and surface mount capability.
BCR420UFD-7
BCR420UFD-7 by Diodes Inc. is a LED display driver with 6 terminals, small outline package style, and nickel palladium gold finish. It has a peak reflow temp of 260°C and dual terminal position. Ideal for graphics display applications requiring a compact design and surface mount capability.
BCR401UE6327HTSA1
BCR401UE6327HTSA1 by Infineon Technologies is a small outline LED display driver with 6 terminals. It operates at a nominal voltage of 10V and has a terminal pitch of 0.95mm. This graphics display driver is ideal for applications requiring compact design and surface mount technology.
BCR420UE6433HTMA1
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 1;
BCR421UE6327HTSA1
BCR421UE6327HTSA1 by Infineon Technologies is a LED display driver with 6 terminals, 3.3V supply voltage, and small outline package style. It is designed for graphics display applications requiring surface mount technology and features a gull wing terminal form. The rectangular package shape with a max seated height of 1.1mm makes it suitable for compact electronic devices.
BCR402WH6327XTSA1
BCR402WH6327XTSA1 by Infineon Technologies is a LED display driver with 4 terminals, small outline package style, and 10V nominal voltage. It is used in graphics display drivers for applications requiring surface mount technology and thin profile packages.
BCR421UW6Q-7
BCR421UW6Q-7 by Diodes Inc. is a LED display driver with 2 segments, operating at 3.3V nominal voltage. It features small outline package style, matte tin terminal finish, and AEC-Q101 screening level for automotive applications. The rectangular plastic/epoxy body measures 3x1.6x1.4mm with dual terminals in gull wing form, suitable for surface mount assembly at peak reflow temp of 260°C.
BCR420UW6-7
BCR420UW6-7 by Diodes Inc. is a small outline LED display driver with 6 terminals and matte tin finish. It operates b/w -55°C to 150°C, has a peak reflow temp of 260°C, and measures 3mm in length. Ideal for graphics displays, this driver offers true output polarity and standard input characteristics.
BCR421UW6-7
BCR421UW6-7 by Diodes Inc. is a graphics display driver with 6 terminals, operating from -55 to 150°C. Its small outline package with matte tin finish and gull wing terminal form makes it suitable for LED display driver applications. The device has a peak reflow temperature of 260°C and is surface mountable, ideal for compact designs.
BCR450E6327HTSA1
Infineon's BCR450E6327HTSA1 is a 6-terminal LED display driver with a max supply voltage of 27V and min of 8V. Its small outline, thin profile package makes it ideal for graphics applications requiring precise control over LED displays. The device features bipolar technology, gull wing terminals, and is surface mountable for compact designs.
BCR405UE6327HTSA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Terminal Finish: TIN;
BCR402UE6433HTMA1
BCR402UE6433HTMA1 by Infineon Technologies is a LED display driver with 6 terminals, 1 function, and 10V supply voltage. It comes in a small outline package shape with tin terminal finish. Ideal for graphics display applications due to its compact size and gull wing terminal form.
BCR420UW6Q-7
BCR420UW6Q-7 by Diodes Inc. is a small outline LED display driver with 6 terminals, matte tin finish, and AEC-Q101 screening level. It has a nominal voltage of 3.3V, 2 segments, and is suitable for graphics display applications in automotive electronics due to its low profile design and high peak reflow temperature of 260°C.
BCR401WH6327XTSA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: VSOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.3 mm;
BCR402RE6327HTSA1
BCR402RE6327HTSA1 by Infineon Technologies is a small outline, thin profile LED display driver with 4 terminals and a max seated height of 1.1 mm. It operates at a nominal voltage of 10 V and is suitable for graphics display applications.
BCR420UE6327
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
BCR401RE6327HTSA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TSSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
BCR421UFD-7
LED DISPLAY DRIVER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
BCR401UW6-7
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): 30;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved