Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADPCM CODEC; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 35; Package Shape: RECTANGULAR; Operating Mode: SYNCHRONOUS;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Anansix
Native Components
$0.658
Northwest PG Solutions
$0.724
MARBEL Systems
$11.073
Texas Native Microelectronics
$12.728
$12.219
$11.837
$11.201
Kenton Components
$15.274
$13.441
Qasali Group International
$34.366
$31.960
$30.242
Semicontronic
$477.000
$465.075
$462.690
One Stop Electronics
$911.000
Corphita
Audio Codecs DS2264-EXP attributes and parameters. Explore more Audio Codecs devices from Dallas Semiconductor
Companding Law:
Filter:
JESD-30 Code:
No. of Functions:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Position:
DS2264-EXP Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Dallas Semiconductor, acquired by Maxim Integrated in 2002 for $2.5 billion,was a company that designed and manufactured analog, digital, and mixed-signal semiconductors (integrated circuits, or ICs).Its specialties included communications products (including T/E and Ethernet products), microcontrollers, battery management, thermal sensing and thermal management, non-volatile random-access memory, microprocessor supervisors, delay lines, silicon oscillators, digital potentiometers, real-time clocks, temperature-compensated crystal oscillators (TCXOs), iButton, and 1-Wire products. Analog Devices, Inc. (NasdaqGS:ADI) completed the acquisition of Maxim Integrated Products, Inc. (NasdaqGS:MXIM) from a group of shareholders on August 26, 2021. Analog Devices, Inc. (ADI) empowers the Intelligent Edge with the world’s most innovative analog, digital, and software solutions, to accelerate breakthroughs that benefit society and the planet.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Gulf Semiconductor
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
World Products
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
ETC5057D-X/HTR
ETC5057D-X/HTR by STMicroelectronics is a CMOS PCM codec designed for audio applications, featuring a compact 16-terminal SO package. It operates in synchronous/asynchronous modes with a max temp of 70 °C and supports A-LAW companding. Ideal for telecom systems, it ensures high-quality audio processing.
STLC3040FN
STLC3040FN by STMicroelectronics is a 16-bit PCM CODEC with A/MU-LAW companding law. It operates at -5V to +5V, has 44 terminals in a square chip carrier package, and supports filter technology. Ideal for telecom applications due to its commercial temperature grade and BICMOS technology.
TP3054AN
Texas Instruments
TP3054AN by Texas Instruments is an Audio Codec with +-5V power supplies, 16 terminals, and mu-law companding law. It operates in synchronous/asynchronous mode for PCM codec applications. The package style is in-line with a rectangular shape and through-hole terminal form, suitable for commercial temperature grade use.
STLC5048
STLC5048 by STMicroelectronics is a 64-terminal audio codec with synchronous operation at 5V. It features A/MU-LAW companding law, industrial temperature grade, and programmable telecom IC type. Ideal for applications requiring fine pitch flatpack package style with low profile design.
LMP92001SQE/NOPB
National Semiconductor
Codecs; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 54; Package Code: QCCN; Package Shape: RECTANGULAR;
TP3057WM
TP3057WM by Texas Instruments is a PCM CODEC with A-LAW companding law. It operates on +-5V power supplies, has 16 terminals in a small outline package, and can handle temperatures from 0 to 70°C. Ideal for audio applications requiring synchronous/asynchronous operation and filtering capabilities.
TCM29C19DW
TCM29C19DW by Texas Instruments is an Audio Codec with +-5V power supplies, 16 terminals, and MU-LAW companding law. It operates in synchronous/asynchronous mode and is ideal for PCM CODEC applications in telecom ICs. The small outline package measures 10.3mm x 7.5mm x 2.65mm, suitable for commercial temperature grades with a max operating temp of 70°C.
821024JG8
Integrated Device Technology
PCM CODEC; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR;
TLV320AC37CDW
TLV320AC37CDW by Texas Instruments is a 20-terminal audio codec with 13-bit linear coding and A-LAW companding law. Operating at 3V, it has synchronous/asynchronous modes and consumes up to 7.5mA. Ideal for PCM codec applications in commercial temperature grades, featuring gull wing terminals and small outline packaging.
TCM38C17DGGR
TCM38C17DGGR by Texas Instruments is a PCM CODEC with 4 functions, operating synchronously at temperatures ranging from -40 to 85°C. This Audio Codec has a small outline package style, gull wing terminal form, and is suitable for industrial-grade telecom applications.
PCF8591P
Philips Semiconductors
Codecs; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
TLV320A1109PBSG4
TLV320A1109PBSG4 by Texas Instruments is a 15-bit audio codec with 32 terminals, operating at 3V. It features A/MU-LAW companding law, industrial temperature grade, and synchronous mode. Ideal for PCM codec applications in telecom due to its compact square package and low supply current of 0.008 mA.
TCM129C14ADW
TCM129C14ADW by Texas Instruments is an Audio Codec with 24 terminals, operating at -40 to 85°C. It features +-5V power supplies, A/MU-LAW companding law, and synchronous/asynchronous mode. Ideal for PCM CODEC applications in industrial settings due to its compact size and CMOS technology.
MAX98089EWY+T
Analog Devices
Analog Devices' MAX98089EWY+T is an Audio Codec with 63 terminals in a rectangular grid array package. Operating from -40 to 85 °C, it features a nominal voltage of 1.8V and PCM CODEC telecom IC type. Ideal for industrial applications requiring fine pitch and thin profile components.
TCM2909N-10
TCM2909N-10 by Texas Instruments is an Audio Codec with 22 terminals, operating in asynchronous mode. It features companding law MU-LAW and operates at temperatures from 0 to 70°C. Ideal for PCM CODEC applications in telecom, this rectangular package has a width of 10.16mm and length of 27.559mm.
ETC5064D
ETC5064D by STMicroelectronics is an Audio Codec with +-5V power supplies, 20 terminals, and mu-law companding law. It operates in synchronous/asynchronous mode for PCM codec applications. Package style is small outline with nickel palladium gold finish, suitable for commercial temperature grade use.
STA027
STA027 by STMicroelectronics is a low-profile PCM codec designed for industrial audio applications. It features a 64-terminal gull-wing package, operates b/w -40 °C to 85°C, and runs on a nominal voltage of 2.5V. Ideal for compact telecom devices, it ensures high performance in demanding environments.
TLC32040MJ
TLC32040MJ by Texas Instruments is a 14-bit PCM CODEC with +-5V supplies, operating from -55 to 125 °C. It features synchronous/asynchronous mode and a ceramic, glass-sealed package. Ideal for military applications requiring audio codecs in an in-line package style.
TLV320A3254IRHBRG4
TLV320A3254IRHBRG4 by Texas Instruments is an Audio Codec with 2 channels, operating from -40 to 85°C. It features a synchronous mode, quad terminals, and a 1.8V supply voltage. Ideal for PCM codec applications in industrial settings due to its compact chip carrier package and single-ended/differential input type.
MC143416PB
LINEAR CODEC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: LQFP; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Dallas Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved