Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PCM TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: QFP; Package Shape: SQUARE;
Median Price
$31.460
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$23.940
1k+ parts
$21.322
10k+ parts
-
Greenchips
$5.885
DF Sales Co.
$9.700
Nova Conductors
$16.425
Anansix
Digiode
Vyrian
Speed Components Ltd
Semi Source
Bristol Electronics
Inventory MP
Prism Electronics
Sea View Technologies
MARBEL Systems
$6.241
Texas Native Microelectronics
$7.174
$6.887
$6.672
$6.313
Corohmni
$8.153
Kenton Components
$8.609
$7.576
Modulus Dynamics
$9.036
AZTECH Wire
$10.738
Aztec Data Supply Inc.
$13.442
Continental Prestige Electronics
$16.096
Netroflash
$15.604
$15.275
Qasali Group International
$19.370
$18.014
$17.045
Semicontronic
$870.000
$848.250
$843.900
One Stop Electronics
$990.000
Authorized Procurement Solutions
QUARKTWIN TECHNOLOGY LTD
Lixinc
A-Z Elektronik GmbH
Alle Elektronik GmbH
Microchip USA
Argo Parts USA
Corphita
Metaverse IC Inc.
Perfect Parts
Assy Fe
Vigor
GreenTree Electronics
Digital Transmission Interfaces DS21348T attributes and parameters. Explore more Digital Transmission Interfaces devices from Dallas Semiconductor
JESD-30 Code:
JESD-609 Code:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
DS21348T Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Dallas Semiconductor, acquired by Maxim Integrated in 2002 for $2.5 billion,was a company that designed and manufactured analog, digital, and mixed-signal semiconductors (integrated circuits, or ICs).Its specialties included communications products (including T/E and Ethernet products), microcontrollers, battery management, thermal sensing and thermal management, non-volatile random-access memory, microprocessor supervisors, delay lines, silicon oscillators, digital potentiometers, real-time clocks, temperature-compensated crystal oscillators (TCXOs), iButton, and 1-Wire products. Analog Devices, Inc. (NasdaqGS:ADI) completed the acquisition of Maxim Integrated Products, Inc. (NasdaqGS:MXIM) from a group of shareholders on August 26, 2021. Analog Devices, Inc. (ADI) empowers the Intelligent Edge with the world’s most innovative analog, digital, and software solutions, to accelerate breakthroughs that benefit society and the planet.
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
STMicroelectronics
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
Daco Semiconductor
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
Rectron
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
Db Lectro
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
PEF81912F
Infineon Technologies
Digital Transmission Interfaces; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: QFP; Package Shape: SQUARE;
SI32280-A-FMR
Skyworks Solutions
DIGITAL SLIC;
DS2148TN+
Analog Devices
Analog Devices' DS2148TN+ is a PCM transceiver IC with 44 terminals, operating at 5V. It features a CMOS technology, industrial temperature grade, and matte tin terminal finish. Suitable for digital transmission interfaces, it has a thin profile flatpack package style and can withstand temperatures from -40 to 85 °C.
DS32508A2
Maxim Integrated
PCM TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: BALL; No. of Terminals: 484; Package Code: BGA; Package Shape: SQUARE;
PEB2095-P
DIGITAL SLIC; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
LIU-02FSR
Analog Devices' LIU-02FSR is a digital transmission interface with 24 terminals, operating b/w -40 to 85°C. Its small outline package, Gull Wing terminals, and 5V supply voltage make it ideal for PCM transceiver applications in telecom systems.
DS26303G-120
PCM TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: BALL; No. of Terminals: 160; Package Code: BGA; Package Shape: SQUARE;
DS21Q48A3N
Digital Transmission Interfaces; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 144; Package Code: BGA; Package Shape: SQUARE;
DS32512W
F1912NCGI8
Renesas Electronics
PCM JITTER ATTENUATOR; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
DS2188SN/T&R
PCM JITTER ATTENUATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
XRT83SL30IV
Exar
Exar's XRT83SL30IV is a digital transmission interface IC with 64 terminals, operating at 3.3V. It supports CEPT PCM-30/E-1 and T-1(DS1) carrier types, ideal for telecom applications. With a low profile flatpack package style and industrial temperature grade, it offers reliable performance in various communication systems.
DS80PCI800SQE/NOPB
National Semiconductor
Digital Transmission Interfaces;
82V2082BFG8
PCM TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 81; Package Code: BGA; Package Shape: SQUARE;
PEB2080-P
DIGITAL SLIC; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 22; Package Code: DIP; Package Shape: RECTANGULAR;
PEF22508E
PCM TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 256; Package Code: LBGA; Package Shape: SQUARE;
AFE1103E
Texas Instruments
AFE1103E by Texas Instruments is a digital transmission interface IC with 48 terminals, operating at 1.168 Mbps data rate and 3.3V nominal voltage. It features CMOS technology, GULL WING terminal form, and is ideal for industrial telecom applications due to its -40 to 85°C temperature range.
78P236-IP
The Texas Instruments 78P236-IP is a PCM transceiver with 28 terminals, operating b/w -40 to 85°C. Its package style is in-line, measuring 15.24mm wide and 35.941mm long. Ideal for digital transmission interfaces in industrial applications due to its through-hole terminal form and nominal voltage of 5V.
82P20516DBF
PCM TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 484; Package Code: BGA; Package Shape: SQUARE;
DS21448L+
PCM TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: LFQFP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS21348TN+
DS21348TN+ by Analog Devices is a digital transmission interface with a square package and a thin profile. It operates at temperatures ranging from -40 to 85 °C and has a max supply current of 0.1 mA. This PCM transceiver is commonly used in telecom applications.
DS21348TN
DS21348TN by Maxim Integrated is a PCM transceiver with 44 terminals, operating at 3.3V. It features a thin profile flatpack package and Gull Wing terminal form, suitable for digital transmission interfaces in industrial telecom applications. Operating temperature ranges from -40 to 85°C, making it ideal for various communication systems.
PCM TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
Dallas Semiconductor
PCM TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: QFP; Package Shape: SQUARE;
DS21Q50LN+
DS21Q50LN+ by Maxim Integrated is a digital transmission interface with 100 terminals, operating at 3.3V. It features CEPT PCM-30/E-1 carrier type and CMOS technology, suitable for telecom applications. With a compact square package style and low profile design, it operates in industrial temperature range from -40 to 85°C.
DS21Q50LN
DS21Q50LN by Maxim Integrated is a digital transmission interface with 100 terminals, operating at 3.3V. It features CEPT PCM-30/E-1 carrier type and GULL WING terminal form. Ideal for telecom applications requiring PCM transceiver technology in industrial temperature range of -40 to 85°C.
DS21348T+
DS21348T+ by Analog Devices is a digital transmission interface with 44 terminals and a square package. It operates at temperatures ranging from 0 to 70 °C and has a power supply of 3.3V. This PCM transceiver is commonly used in telecom applications.
PCM TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
DS21348T
DS21348G
PCM TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: BALL; No. of Terminals: 49; Package Code: LFBGA; Package Shape: SQUARE;
DS21348G+
PCM TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: BALL; No. of Terminals: 49; Package Code: FBGA; Package Shape: SQUARE;
DS21349Q+
PCM TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
DS21349Q
DS21348GN+
PCM TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 49; Package Code: LFBGA; Package Shape: SQUARE;
DS21348GN
DS21352L
PCM TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved