Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: POE13W3X3.3; Minimum Input Voltage (V): 29.5; No. of Winding (Secondary): 3; Height: 10 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
SMPS Transformers POE13W3X3.3 attributes and parameters. Explore more SMPS Transformers devices from Cooper Industries
Additional Features:
Height:
Maximum Input Voltage (V):
Minimum Input Voltage (V):
Length:
Manufacturer Series:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Packing Method:
Dimensions:
Power Rating:
Inductance (Primary):
Transformer Type:
Width:
POE13W3X3.3 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148WS
Surge Components
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Intersil
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
PA5130.002NLT
Pulse Electronics
PA5130.002NLT by Pulse Electronics is a 25W SMPS Transformer with 2 primary windings at 80uH inductance. It has 2 secondary windings, operates b/w -40 to 125 °C, and outputs dual voltages of 5V each. Ideal for surface mount applications up to 200 KHz frequency.
FL2015-5LB
Coilcraft
Coilcraft FL2015-5LB is a 6W SMPS transformer with primary inductance of 20uH. Operating at -40 to 85°C, it outputs 1600V at max input voltage of 12V. Ideal for surface mount applications up to 100 KHz frequency.
PA6605-AL
Coilcraft's PA6605-AL is a SMPS transformer with 10uH inductance, 12V output voltage, and -40 to 125°C operating temperature range. Ideal for surface mount applications, it has a compact size of 30x26.67x13.6mm and supports input voltages from 9V to 60V.
FA2924-ALD
FA2924-ALD by Coilcraft is a 15W SMPS transformer with primary inductance of 40uH. It has 2 secondary windings, output current of 4.5A, and output voltage of 3.3V, suitable for power applications. Operating temperature ranges from -40 to 85°C, with dimensions L17.75xB13.46xH12.32mm for surface mounting method.
PA5130.003NLT
PA5130.003NLT by Pulse Electronics is a 25W SMPS transformer with 2 primary windings and an inductance of 80uH. It has a max operating temperature of 125°C and is suitable for applications requiring a min input voltage of 33V, such as power supplies and converters.
RA6992-BL
Coilcraft's RA6992-BL SMPS Transformer has a power rating of 250W, with 2 primary windings and an isolation voltage of 1500V. It is designed for applications requiring a transformer with inductance of 50uH, operating b/w -40°C to 85°C, and outputting at 12V. Ideal for surface mount setups, it features a turns ratio of 8T:4T and can handle input voltages ranging from 48V to 60V.
CTX02-15835
Cooper Industries
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: CTX02-15835; Width: 14.4 mm; Dimensions: L14.1XB14.4XH10.6 (mm); No. of Winding (Primary): 2;
CX9721-ALD
CX9721-ALD by Coilcraft is a SMPS transformer with 10uH inductance, operating b/w -40°C to 125°C. It has an output voltage of 5V and can handle input voltages from 5V to 20V. Ideal for surface mount applications in power supplies and converters.
POE13W2X12-R
Cooper Electronic Technologies
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: POE13W2X12-R; Power Rating: 13 W; Dimensions: 17.1mm X 16.0mm X 8.4mm; Additional Features: TURNS RATIO: 1:0.529:0.647:0.647, SWITCHING FREQUENCY IS 250 KHZ, FLYBACK;
PL300-101L
Coilcraft PL300-101L is a 300W SMPS transformer with 2 primary windings, 448uH inductance, and AEC-Q200 approval. Ideal for applications requiring a nominal input voltage of 48V, operating at frequencies b/w 200KHz to 700KHz. Designed for surface mounting with dimensions of 29.46mm x 26.67mm x 10.4mm, suitable for temperatures ranging from -40°C to 125°C.
FL2015-4LD
Coilcraft's FL2015-4LD SMPS Transformer offers 6W power rating, 44uH primary inductance, and 1600V output voltage. Ideal for surface mount applications in SMPS circuits with a max operating frequency of 100KHz.
PH0256NL
PH0256NL by Pulse Electronics is a SMPS transformer with 3 primary windings, 2800uH inductance, and max operating temp of 125°C. Ideal for applications requiring a 5V output voltage, it has a min operating temp of -40°C and dimensions of 14.5mm x 16.5mm x 19mm.
PA1366NL
PA1366NL by Pulse Electronics is a SMPS transformer with 2 primary windings and 1 secondary winding. It has an inductance of 10 uH and can operate at temperatures ranging from -40 to 130 °C. This transformer is suitable for applications requiring an output voltage of 48 V and a max operating frequency of 150 KHz.
C1589-ALD
Coilcraft's C1589-ALD is a 7W SMPS transformer with primary inductance of 155uH. It has 2 secondary windings and operates b/w -40 to 85°C. Ideal for applications requiring a max input voltage of 72V, output voltage of 12V, and operating frequency up to 250 KHz.
ZA9644-AED
ZA9644-AED by Coilcraft is a SMPS transformer with inductance of 376uH, operating temperature range -40 to 85°C. It has output voltages of 6V and 28V, suitable for applications requiring surface mount transformers in power supplies with input voltage range of 4.5-60V.
ZA9672-BED
ZA9672-BED by Coilcraft is a 12W SMPS Transformer with primary inductance of 7uH, operating at -40 to 85°C. It has 2 windings for both primary and secondary, outputting 12V at max frequency of 300KHz. Ideal for surface mount applications requiring AEC-Q200 approval.
750316033
Wuerth Elektronik & Kg
Wurth Elektronik 750316033 is a SMPS transformer with inductance of 370uH. It has approvals from AEC-Q200, CSA, EN, IEC, UL and operates b/w -40 to 125°C. Ideal for applications requiring output voltage of 3.3V and min input voltage of 4.5V in compact dimensions of L12.32xB10.41xH11.43mm for surface mounting method.
750311880
Wurth Elektronik 750311880 is a SMPS transformer with inductance of 2.5uH, operating temperature range from -40 to 125°C, and dimensions L9.78xB9.14xH10.54mm. It has two secondary windings for output voltages of 5V each, suitable for applications requiring a min input voltage of 3V and operating frequency b/w 200kHz to 600kHz on surface mount boards.
PA2627NL
PA2627NL by Pulse Electronics is a SMPS transformer with 2 primary windings and inductance of 50.5uH. It operates b/w -40 to 130°C, outputs 3.3V, and supports input voltages from 18-75V. Ideal for surface mount applications with dimensions L13.08xB15.24xH11.45mm and max frequency of 200KHz.
WA8515-ALD
Coilcraft's WA8515-ALD is a 25W SMPS transformer with 2 primary windings at 90uH. It operates b/w -40°C to 85°C, suitable for applications requiring a 5V output voltage and up to 57V input voltage. Ideal for surface mounting in power supply designs up to 250 KHz frequency.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved